From a0950ef7e4c14b8e1d23543b97d4907a794e89a1 Mon Sep 17 00:00:00 2001
From: wherzig <>
Date: Sun, 20 Mar 2011 21:56:43 +0000
Subject: [PATCH] changes for USBWX module

git-svn-id: https://svn.fhem.de/fhem/trunk/fhem@871 2b470e98-0d58-463d-a4d8-8e2adae1ed80
---
 docs/commandref.html | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/docs/commandref.html b/docs/commandref.html
index 1ebe6b447..0aa53dc5b 100644
--- a/docs/commandref.html
+++ b/docs/commandref.html
@@ -5431,28 +5431,31 @@ Terminating
 <a name="USBWX"></a>
 <h3>USBWX</h3>
 <ul>
+  The USBWX module interprets the messages received by the ELV <a href="http://www.elv.de/output/controller.aspx?cid=74&detail=10&detail2=29870">USB-WDE1</a> weather receiver. This receiver is compaptible with the following ELV sensors: KS200/KS300, S300IA, S300TH, ASH2200, PS50. It also known to work with Conrad weather sensors KS555, S555TH and ASH555.<br> This module was tested with ELV S300TH, ELV ASH2200, ELV KS300, Conrad S555TH and Conrad KS555. <br>
+Readings and STATE of temperature/humidity sensors are compatible with the CUL_WS module. For KS300/KS555 sensors STATE is compatible with the KS300 module. The module is integrated into autocreate to generate the appropriate filelogs and weblinks automatically.
+  <br>
   <br>
-
   <a name="USBWXdefine"></a>
   <b>Define</b>
   <ul>
     <code>define &lt;name&gt; USBWX &lt;serial device&gt;</code>
-    <br><br>
-
-    Defines an ELV <a href="http://www.elv.de/output/controller.aspx?cid=74&detail=10&detail2=24916&flv=1">USB-WDE1</a> weatherstation attached via usb.<br>
-
     <br>
-    The WDE1 is able to receive the following sensors:<br>
-    <ul>
-      <li>S 300 TH (implemented and tested)
-      <li>S 300 IA (implemented)
-      <li>ASH 2200 (implemented)
-      <li>PS 50    (implemented)
-      <li>KS 200/300 (NOT yet implemented)
-    </ul>
+    <br>Defines USB-WDE1 attached via usb.<br>
+    <br>
+    <code>define &lt;name&gt; USBWX &lt;code&gt; [corr1...corr4]</code> <br>
+    <br>
+    &lt;code&gt; is the code which must be set on the sensor. Valid values
+    are 1 through 8. <br> 9 is used as the sensor id of the ks300 sensor.<br> 
+    corr1..corr4 are up to 4 numerical correction factors, which will be added
+    to the respective value to calibrate the device. Note: rain-values will be
+    multiplied and not added to the correction factor.
+    <br>
     <br>
     Example:<pre>
-    define WDE1Device  USBWX   /dev/ttyUSB0
+    define USBWDE1 USBWX /dev/ttyUSB0
+    define USBWX_1 USBWX 1
+    define USBWX_livingroom USBWX 2
+    define USBWX_ks300 USBWX 9
     </pre>
   </ul>