diff --git a/fhem/FHEM/10_EnOcean.pm b/fhem/FHEM/10_EnOcean.pm index 663bb7eec..7cb88b9da 100755 --- a/fhem/FHEM/10_EnOcean.pm +++ b/fhem/FHEM/10_EnOcean.pm @@ -163,33 +163,22 @@ my %EnO_subType = ( "A5.30.02" => "digitalInput.02", "A5.38.08" => "gateway", "A5.3F.7F" => "manufProfile", + "D5.00.01" => "contact", + "F6.04.01" => "keycard", + "F6.10.00" => "windowHandle", 1 => "switch", - 2 => "contact", - 3 => "sensor", - 4 => "windowHandle", - 5 => "eltakoDimmer", - 6 => "eltakoShutter", - 7 => "FAH", - 8 => "FBH", - 9 => "FTF", - 10 => "SR04", - 11 => "FRW", - 12 => "keycard", - 13 => "raw", + 2 => "sensor", + 3 => "FRW", + 4 => "PM101", + 5 => "raw", ); my @EnO_models = qw ( other - FAH60 FAH63 FIH63 - FABH63 FBH55 FBH63 FIBH63 FSB14 FSB61 FSB70 - FSG70 FSM12 FSM61 FT55 - FTF55 FTS12 - PM101 - SR04 SR04P SR04T SR04PT SR04PMS SR04PS SR04PST ); # Initialize @@ -206,18 +195,18 @@ EnOcean_Initialize($) $hash->{ParseFn} = "EnOcean_Parse"; $hash->{SetFn} = "EnOcean_Set"; $hash->{AttrList} = "IODev do_not_notify:1,0 ignore:0,1 dummy:0,1 " . - "showtime:1,0 loglevel:0,1,2,3,4,5,6 ". - "actualTemp dimTime dimValueOn ". - "model:".join(",", @EnO_models)." ". - "gwCmd:".join(",", sort @EnO_gwCmd)." ". - "manufID:".join(",", keys %EnO_manuf)." ". - "rampTime ". - "repeatingAllowed:yes,no ". - "shutTime subDef subDef0 subDefI ". - "subType:".join(",", sort grep { !$subTypeList{$_}++ } values %EnO_subType)." ". - "subTypeSet:".join(",", sort grep { !$subTypeSetList{$_}++ } values %EnO_subType)." ". - "switchMode:switch,pushbutton ". - "switchType:direction,universal,central ". + "showtime:1,0 loglevel:0,1,2,3,4,5,6 " . + "actualTemp dimTime dimValueOn " . + "model:" . join(",", @EnO_models) . " " . + "gwCmd:" . join(",", sort @EnO_gwCmd) . " " . + "manufID:" . join(",", keys %EnO_manuf) . " " . + "rampTime " . + "repeatingAllowed:yes,no " . + "shutTime subDef subDef0 subDefI " . + "subType:" . join(",", sort grep { !$subTypeList{$_}++ } values %EnO_subType) . " " . + "subTypeSet:" . join(",", sort grep { !$subTypeSetList{$_}++ } values %EnO_subType) . " " . + "switchMode:switch,pushbutton " . + "switchType:direction,universal,central " . $readingFnAttributes; for(my $i=0; $i<@EnO_ptm200btn;$i++) { @@ -279,14 +268,14 @@ EnOcean_Set($@) # See also http://www.oscat.de/community/index.php/topic,985.30.html # Maintenance commands (runInit, liftSet, valveOpen, valveClosed) my %sets = ( - "desired-temp" => "\\d+(\\.\\d)?", - "actuator" => "\\d+", - "unattended" => "", - "initialize" => "", - "runInit" => "", - "liftSet" => "", - "valveOpen" => "", - "valveClosed" => "", + "desired-temp" => "\\d+(\\.\\d)?", + "actuator" => "\\d+", + "unattended" => "", + "initialize" => "", + "runInit" => "", + "liftSet" => "", + "valveOpen" => "", + "valveClosed" => "", ); my $re = $sets{$a[0]}; return "Unknown argument $cmd, choose one of ".join(" ", sort keys %sets) @@ -308,140 +297,6 @@ EnOcean_Set($@) $hash->{READINGS}{$cmd}{TIME} = $tn; $hash->{READINGS}{$cmd}{VAL} = $arg; - } elsif($st eq "eltakoDimmer") { - # Dimmer - my $sendDimCmd=0; - my $dimTime=AttrVal($name, "dimTime", 1); - my $onoff=1; - my $dimVal=$hash->{READINGS}{dimValue}{VAL}; - - if($cmd eq "teach") { - $data = "A502000000"; - $header = "000A0001"; - Log $ll2, "EnOcean: set $name $cmd"; - - } elsif($cmd eq "dim") { - return "Usage: $cmd percent [dimspeed 1-100]" if(@a<2 or $a[1]>100); - # for eltako relative (0-100) (but not compliant to EEP because DB0.2 - # is 0) - $dimVal=$a[1]; - readingsSingleUpdate($hash, "dimValueStored", $dimVal, 1); - shift(@a); - if(defined($a[1])) { - $dimTime = sprintf("%X",(($a[1]*2.55)-255)*-1); - shift(@a); - } - $sendDimCmd=1; - - } elsif($cmd eq "dimup") { - return "Usage: $cmd percent [dimspeed 1-100]" if(@a<2 or $a[1]>100); - $dimVal+=$a[1]; - readingsSingleUpdate($hash,"dimValueStored",$dimVal,1); - shift(@a); - if(defined($a[1])) { - $dimTime=sprintf("%X",(($a[1]*2.55)-255)*-1); - shift(@a); - } - $sendDimCmd=1; - - } elsif($cmd eq "dimdown") { - return "Usage: $cmd percent [dimspeed 1-100]" if(@a<2 or $a[1]>100); - $dimVal-=$a[1]; - readingsSingleUpdate($hash,"dimValueStored",$dimVal,1); - shift(@a); - if(defined($a[1])) { - $dimTime=sprintf("%X",(($a[1]*2.55)-255)*-1); - shift(@a); - } - $sendDimCmd=1; - - } elsif($cmd eq "on" || $cmd eq "B0") { - $dimTime=1; - $sendDimCmd=1; - my $dimValueOn = AttrVal($name, "dimValueOn", 100); - if ($dimValueOn eq "stored") { - $dimVal = ReadingsVal($name, "dimValueStored", 100); - if ($dimVal < 1) { - $dimVal = 100; - readingsSingleUpdate($hash, "dimValueStored", $dimVal, 1); - } - } elsif ($dimValueOn eq "last") { - $dimVal = ReadingsVal($name, "dimValueLast", 100); - if ($dimVal < 1) { - $dimVal = 100; - } - } else { - $dimVal = $dimValueOn; - if($dimValueOn > 100) { $dimVal = 100; } - if($dimValueOn < 1) { $dimVal = 1; } - } - - } elsif($cmd eq "off" || $cmd eq "BI") { - $dimTime=1; - $onoff=0; - $sendDimCmd=1; - $dimVal=0; - - } else { - my $list = "dim:slider,0,1,100 dimup:slider,0,1,100 ". - "dimdown:slider,0,1,100 on off teach"; - return SetExtensions($hash, $list, $name, @a); - } - - if($sendDimCmd) { - $a[0]="on"; - if($dimVal > 100) { $dimVal=100; } - if($dimVal <= 0) { $dimVal=0; $onoff=0; $a[0]="off"; } - $updateState = 0; - $data = sprintf "A502%02X%02X%02X", $dimVal, $dimTime, $onoff|0x08; - $header = "000A0001"; - Log $ll2, "EnOcean: set $name $cmd"; - } - - } elsif($st eq "eltakoShutter") { - # Shutter - my $shutTime = AttrVal($name, "shutTime", 0); - my $shutCmd = 0x00; - if($cmd eq "teach") { - $data = "A5FFF80D80"; - $header = "000A0001"; - Log $ll2, "EnOcean: set $name $cmd"; - - } elsif($cmd eq "stop") { - $shutCmd = 0x00; - - } elsif($cmd eq "up" || $cmd eq "B0") { - my $position = 100; - if($a[1]) { - $shutTime = $shutTime/100*$a[1]; - $position = $hash->{READINGS}{position}{VAL}+$a[1]; - if($position > 100) { $position = 100; }; - } - $hash->{READINGS}{position}{TIME} = $tn; - $hash->{READINGS}{position}{VAL} = $position; - $shutCmd = 0x01; - - } elsif($cmd eq "down" || $cmd eq "BI") { - my $position = 0; - if($a[1]) { - $shutTime = $shutTime/100*$a[1]; - $position = $hash->{READINGS}{position}{VAL}-$a[1]; - if($position <= 0) { $position = 0; }; - } - $hash->{READINGS}{position}{TIME} = $tn; - $hash->{READINGS}{position}{VAL} = $position; - $shutCmd = 0x02; - } else { - return "Unknown argument " . $cmd . ", choose one of up down stop teach" - } - shift(@a); - if($shutCmd || ($cmd eq "stop")) { - $updateState = 0; - $data = sprintf "A5%02X%02X%02X%02X", 0x00, $shutTime, $shutCmd, 0x08; - $header = "000A0001"; - Log $ll2, "EnOcean: set $name $cmd"; - } - } elsif ($st eq "gateway") { # Gateway (EEP A5-38-08) # select Command from attribute gwCmd or command line @@ -489,7 +344,7 @@ EnOcean_Set($@) $updateState = 0; $data = sprintf "A5%02X%04X%02X", $gwCmdID, $time, $setCmd; } else { - my $cmdList = "B0 BI off on teach"; + my $cmdList = "B0 BI teach"; return SetExtensions ($hash, $cmdList, $name, @a); $updateState = 0; $data = sprintf "A5%02X%04X%02X", $gwCmdID, $time, $setCmd; @@ -584,7 +439,7 @@ EnOcean_Set($@) $sendDimCmd = 1; } else { - my $cmdList = "dim:slider,0,1,100 B0 BI on off teach"; + my $cmdList = "dim:slider,0,1,100 B0 BI teach"; return SetExtensions ($hash, $cmdList, $name, @a); } if($sendDimCmd) { @@ -881,6 +736,7 @@ EnOcean_Set($@) return "Unknown Gateway Command " . $cmd . ", choose one of ". join(" ", sort keys %EnO_gwCmd); } # write gateway command + # header: len: 0x000A optlen: 0x00 pakettype: 0x01(radio) $header = "000A0001"; Log $ll2, "EnOcean: set $name $cmd"; @@ -953,7 +809,7 @@ EnOcean_Set($@) } } } else { - return "Unknown argument " . $cmd . ", choose one of up stop down position teach" + return "Unknown argument " . $cmd . ", choose one of position:slider,0,5,100 up stop down teach" } if($shutCmd || $cmd eq "stop") { $updateState = 0; @@ -1109,8 +965,8 @@ EnOcean_Set($@) if ($switchMode eq "pushbutton") { $data = "F600"; $status = "20"; - $data = sprintf "%s%s%s", $data, $subDef, $status; Log $ll2, "EnOcean: set $name released"; + $data = sprintf "%s%s%s", $data, $subDef, $status; IOWrite ($hash, $header, $data); } } @@ -1227,7 +1083,7 @@ EnOcean_Parse($$) push @event, "3:channelD:DI"; } # released events are disturbing when using a remote, since it overwrites - # the "real" state immediately. In the case of an Eltako FSB14, FSB61 + # the "real" state immediately. In the case of an Eltako FSB14, FSB61 ... # the state should remain released. (by Thomas) $event = "buttons" if ($msg =~ m/released$/ && $model ne "FT55" && $model ne "FSB14" && @@ -1292,85 +1148,16 @@ EnOcean_Parse($$) push @event, "3:selfCtl:" . (($db_0 & 0x04) ? "on" : "off"); EnOcean_MD15Cmd($hash, $name, $db_1); - } elsif($model eq "PM101") { + } elsif($st eq "PM101") { # Light and Presence Sensor [Omnio Ratio eagle-PM101] # The sensor also sends switching commands (RORG F6) with the senderID-1 - # code by aicgazi - # $db_2 is the illuminance where max value 0xFF stands for 1000 lx - my $lux = sprintf "%3d", $db_2; - $lux = sprintf "%04.2f", ( $lux * 1000 / 255 ) ; - push @event, "3:brightness:$lux"; - push @event, "3:channel1:" . ($db_0 & 0x01 ? "off" : "on"); - push @event, "3:channel2:" . ($db_0 & 0x02 ? "off" : "on"); - push @event, "3:motion:" . ($db_0 & 0x02 ? "off" : "on"); - push @event, "3:state:" . ($db_0 & 0x02 ? "off" : "on"); - - } elsif($st eq "FAH" || $model =~ /^(FAH60|FAH63|FIH63)$/) { - # Light Sensor - # [Eltako FAH60, FAH63, FIH63] (EEP A5-06-01 plus Data_byte3) - # $db_3 is the illuminance where min 0x00 = 0 lx, max 0xFF = 100 lx - # $db_2 must be 0x00 - if($db_2 eq 0x00) { - my $luxlow = sprintf "%3d", $db_3; - $luxlow = sprintf "%d", ( $luxlow * 100 / 255 ) ; - push @event, "3:brightness:$luxlow"; - push @event, "3:state:$luxlow"; - } else { - # $db_2 is the illuminance where min 0x00 = 300 lx, max 0xFF = 30000 lx - my $lux = sprintf "%3d", $db_2; - $lux = sprintf "%d", (( $lux * 116.48) + 300 ) ; - push @event, "3:brightness:$lux"; - push @event, "3:state:$lux"; - } - - } elsif($st eq "FBH" || $model =~ /^(FABH63|FBH55|FBH63|FIBH63)$/) { - # Light and Occupancy Sensor (no Temperature) - # [Eltako FABH63, FBH55, FBH63, FIBH63] (EEP similar A5-08-01) - # $db_0 motion detection where 0x0D = motion and 0x0F = no motion - # (DB0_Bit1 = 1 or 0) - if($db_0 eq 0x0D) { - push @event, "3:motion:yes"; - push @event, "3:state:yes"; - } - if($db_0 eq 0x0F) { - push @event, "3:motion:no"; - push @event, "3:state:no"; - } - # $db_2 is the illuminance where min 0x00 = 0 lx, max 0xFF = 2048 lx - my $lux = sprintf "%3d", $db_2; - $lux = sprintf "%d", ( $lux * 2048 / 255 ) ; - push @event, "3:brightness:$lux"; - # $db_3 is voltage in EEP A5-08-01 but not used by Eltako !? - # push @event, "3:voltage:$db_3"; - - } elsif($st eq "FTF" || $model eq "FTF55") { - # Temperature Sensor (EEP A5-02-05) - # [Eltako FTF55, Thermokon SR04] - # $db_1 is the temperature where 0x00 = 40°C and 0xFF = 0°C - my $temp = sprintf "%3d", $db_1; - $temp = sprintf "%0.1f", ( 40 - $temp * 40 / 255 ) ; - push @event, "3:state:$temp"; - push @event, "3:temperature:$temp"; - - } elsif($model =~ m/^SR04/ || $st eq "SR04") { - # Room Sensor and Control Unit - # [Thermokon SR04 *] - my ($fspeed, $temp, $present, $solltemp); - $fspeed = 3; - $fspeed = 2 if($db_3 >= 145); - $fspeed = 1 if($db_3 >= 165); - $fspeed = 0 if($db_3 >= 190); - $fspeed = "Auto" if($db_3 >= 210); - $temp = sprintf("%0.1f", 40-$db_1/6.375); # 40..0 - $present= $db_0&0x1 ? "no" : "yes"; - $solltemp= sprintf("%0.1f", $db_2/6.375); - push @event, "3:state:temperature $temp"; - push @event, "3:set_point: $solltemp"; - push @event, "3:setpoint:$db_2"; - push @event, "3:fan:$fspeed"; - push @event, "3:present:$present" if($present eq "yes"); - push @event, "3:learnBtn:on" if(!($db_0&0x8)); - push @event, "3:T:$temp SP: $db_3 F: $fspeed P: $present"; + # $db_2 is the illuminance where 0x00 = 0 lx ... 0xFF = 1000 lx + my $channel2 = $db_0 & 2 ? "yes" : "no"; + push @event, "3:brightness:" . $db_2 << 2; + push @event, "3:channel1:" . ($db_0 & 1 ? "yes" : "no"); + push @event, "3:channel2:" . $channel2; + push @event, "3:motion:" . $channel2; + push @event, "3:state:" . $channel2; } elsif ($st =~ m/^tempSensor/) { # Temperature Sensor with with different ranges (EEP A5-02-01 ... A5-02-1B) @@ -2484,17 +2271,6 @@ EnOcean_Parse($$) push @event, "3:state:Manufacturer Specific Application unknown"; } - } elsif ($st eq "eltakoDimmer") { - # Dimmer - # todo: create a more general solution for the central-command responses - if($db_3 eq 0x02) { # dim - push @event, "3:state:" . ($db_0 & 0x01 ? "on" : "off"); - push @event, "3:dimValue:" . $db_2; - if ($db_2 > 0) { - push @event, "3:dimValueLast:" . $db_2; - } - } - } elsif ($st eq "raw") { # raw push @event, "3:state:RORG: $rorg DATA: $data STATUS: $status ODATA: $odata"; @@ -2629,6 +2405,10 @@ EnOcean_Undef($$) In order to enable communication with EnOcean remote stations a TCM module is necessary.

+ Please note that EnOcean repeaters also send Fhem data telegrams again. + Use the TCM attr <name> blockSenderID own + to block receiving telegrams with a TCM SenderIDs. +

Define @@ -2647,12 +2427,12 @@ EnOcean_Undef($$) In order to control devices, you cannot reuse the SenderIDs/ DestinationID of other devices (like remotes), instead you have to create your own, which must be in the allowed SenderID range of the underlying Fhem - IO device. For this first query the TCM with the - get <tcm> idbase command for the BaseID. You can use - up to 127 IDs starting with the BaseID + 1 shown there. The BaseID is - used for A5 devices with a bidectional teach-in only. If you are using an Fhem - SenderID outside of the allowed range, you will see an ERR_ID_RANGE - message in the Fhem log.
+ IO device, see TCM BaseID, LastID. For this first query the + TCM with the get <tcm> baseID command + for the BaseID. You can use up to 127 IDs starting with the BaseID + 1 shown there. + The BaseID is used for A5 devices with a bidectional teach-in only. If you + are using an Fhem SenderID outside of the allowed range, you will see an + ERR_ID_RANGE message in the Fhem log.
In order to control bidirectional F6 devices (switches, actors) with additional SenderIDs you can use the attributes subDef, subDef0 and subDefI.
@@ -2985,7 +2765,7 @@ EnOcean_Undef($$) Position Range: position = 0 % ... 100 %
Angle Time Range: ta = 0 s ... 25.5 s
Runtime value for the sunblind reversion time. Select the time to revolve - the sunblind from one slat engle end psosition to the other end position.
+ the sunblind from one slat angle end position to the other end position.
Slat Angle: α|αs|αo = -180 ° ... 180 °
Position Logic, normal: Blinds fully opens corresponds to Position = 0 %
Position Logic, inverse: Blinds fully opens corresponds to Position = 100 %
@@ -3034,83 +2814,17 @@ EnOcean_Undef($$) Set attr subType to raw manually.

- -
  • Dimmer
    - [Eltako FUD12, FUD14, FUD61, FUD70, tested with Eltako devices only]
    -
    - Old profile, use Gateway alternative.
    - Set attr subType to eltakoDimmer manually.
    - Use the sensor type "PC/FVS" for Eltako devices. -
    • -

    - -
  • Dimmer for fluorescent lamps
    - [Eltako FSG70, tested with Eltako FSG70 only]
    -
    - Old profile, use Gateway alternative.
    - Set attr subType to eltakoDimmer, attr subTypeSet to switch, attr eventMap - to B0:on BI:off and attr switchMode to pushbutton manually.
    - Use the sensor type "Richtungstaster" for Eltako devices. -
    • -

    - -
  • Shutter (EEP F6-02-01 ... F6-02-02 and A5-3F-7F)
    - [Eltako FSB12, FSB14, FSB61, FSB70, tested with Eltako devices only]
    -
    - Old profile, use Manufacturer Specific Applications - alternative.
    - Set attr subType to eltakoShutter and attr model to - FSB14|FSB61|FSB70 manually.
    - Use the sensor type "Szenentaster/PC" for Eltako devices. -
    • - -
    - + + - Get
    + Get +
    Attributes
    Generated events
    - With the help of this command data messages in hexadecimal format can be received. + With the help of this command data messages in hexadecimal format can be sent and received. The telegram type (RORG) 4BS can be received. For further information, see EnOcean Equipment Profiles (EEP).
    @@ -4042,116 +3757,25 @@ EnOcean_Undef($$)

    -
  • Dimmer
    - [Eltako FUD14, FUD61, FUD70, FSG14, FSG70, ...]
    -
    - Old profile, use Gateway alternative.
    - Set attr subType to eltakoDimmer manually. -
    • -

    - -
  • Shutter (EEP F6-02-01 ... F6-02-02)
    - [Eltako FSB14, FSB61, FSB70]
    -
    - Old profile, use Manufacturer Specific Applications - alternative.
    - Set attr subType to eltakoShutter and attr model to FSB14|FSB61|FSB70 manually. -
    • -

    - -
  • Temperature Sensor (EEP A5-02-05)
    - [Eltako FTF55]
    -
    - Old profile, use subType roomSensorControl.05 alternative.
    - Set attr subType to FTF or attr model to FTF55 manually. -
    • -

    - -
  • Room Sensor and Control Unit (EEP A5-02-05, A5-10-03, A5-10-0C, A5-10-05, - A5-10-06, A5-10-04, A5-10-01)
    - [Thermokon SR04 *]
    -
    - Old profile, use subType roomSensorControl.05 alternative.
    - Set attr model to SR04|SR04P|SR04T|SR04PT|SR04PMS|SR04PS|SR04PST or - attr subType to SR04. -
    • -

    - -
  • Light Sensor (EEP similar A5-06-01)
    - [Eltako FAH60, FAH63, FIH63]
    -
    - Old profile, use subType lightSensor.01 alternative.
    - Set attr subType to FAH or attr model to FAH60|FAH63|FIH63 - manually. -
    • -

    - -
  • Light and Occupancy Sensor (EEP similar A5-08-01)
    - [Eltako FABH63, FBH55, FBH63, FIBH63]
    -
    - Old profile, use subType lightTempOccupSensor.01 alternative.
    - Set attr subType to FBH or attr model to FABH63|FBH55|FBH63|FIBH63 - manually. -
    • -

    - -
  • Light and Presence Sensor
    - [Omnio Ratio eagle-PM101]
    -
    - The sensor also sends switching commands (RORG F6) with - the senderID-1.
    - Set attr model to PM101 manually. Automatic teach-in is not possible, - since no EEP and manufacturer ID are sent. -
    • +
  • Light and Presence Sensor
    + [Omnio Ratio eagle-PM101]
    +
    + The sensor also sends switching commands (RORG F6) with the SenderID-1.
    + Set attr subType to PM101 manually. Automatic teach-in is not possible, + since no EEP and manufacturer ID are sent. +