diff --git a/FHEM/00_CUL.pm b/FHEM/00_CUL.pm
index b002b5ced..544bc5627 100755
--- a/FHEM/00_CUL.pm
+++ b/FHEM/00_CUL.pm
@@ -918,6 +918,7 @@ CUL_Parse($$$$$)
} elsif($fn eq "A" && $len >= 20) { # AskSin/BidCos/HomeMatic
my $srcId = substr($dmsg,9,6);
$hash->{helper}{nextSend}{$srcId} = gettimeofday() + 0.100;
+ $dmsg .="::$rssi" if(defined($rssi));
} elsif($fn eq "Z" && $len >= 21) { # Moritz/Max
;
} elsif($fn eq "t" && $len >= 5) { # TX3
diff --git a/FHEM/00_HMLAN.pm b/FHEM/00_HMLAN.pm
index 89ec25274..57493ba73 100755
--- a/FHEM/00_HMLAN.pm
+++ b/FHEM/00_HMLAN.pm
@@ -341,7 +341,7 @@ HMLAN_Parse($$)
HMLAN_Write($hash,undef, "As15".$mNo."8002".$dst.$src."00");
}
- $dmsg .= ":NACK" if($mFld[1] !~ m/00(01|02|21)/ && $letter eq 'R');
+ $dmsg .= (($mFld[1] !~ m/00(01|02|21)/ && $letter eq 'R')?":NACK:":"::").(hex($mFld[4])-65536);
$hash->{uptime} = HMLAN_uptime($mFld[2]);
$hash->{RSSI} = hex($mFld[4])-65536;
diff --git a/FHEM/10_CUL_HM.pm b/FHEM/10_CUL_HM.pm
index d87aab4c5..ddb51759c 100755
--- a/FHEM/10_CUL_HM.pm
+++ b/FHEM/10_CUL_HM.pm
@@ -174,20 +174,20 @@ my %culHmModel=(
"0064" => {name=>"DORMA_atent" ,st=>'' ,cyc=>'' ,rxt=>'c' ,lst=>'1,3' ,chn=>"",}, # DORMA Remote 3 buttons
"0065" => {name=>"DORMA_BRC-H" ,st=>'' ,cyc=>'' ,rxt=>'c' ,lst=>'1,3' ,chn=>"",}, # Dorma Remote 4 single buttons
"0066" => {name=>"HM-LC-SW4-WM" ,st=>'switch' ,cyc=>'' ,rxt=>'b' ,lst=>'3' ,chn=>"Sw:1:4",},
- "0067" => {name=>"HM-LC-Dim1PWM-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "0068" => {name=>"HM-LC-Dim1TPBU-FM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
+ "0067" => {name=>"HM-LC-Dim1PWM-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},#Sw:1:1,
+ "0068" => {name=>"HM-LC-Dim1TPBU-FM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},#Sw:1:1,
"0069" => {name=>"HM-LC-Sw1PBU-FM" ,st=>'switch' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},
"006A" => {name=>"HM-LC-Bl1PBU-FM" ,st=>'blindActuator' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},
"006B" => {name=>"HM-PB-2-WM55" ,st=>'pushButton' ,cyc=>'' ,rxt=>'c:w' ,lst=>'1,4' ,chn=>"Btn:1:2",},
"006C" => {name=>"HM-LC-SW1-BA-PCB" ,st=>'switch' ,cyc=>'' ,rxt=>'b' ,lst=>'3' ,chn=>"",},
"006D" => {name=>"HM-OU-LED16" ,st=>'outputUnit' ,cyc=>'' ,rxt=>'' ,lst=>'' ,chn=>"Led:1:16",},
- "006E" => {name=>"HM-LC-Dim1L-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "006F" => {name=>"HM-LC-Dim1L-Pl" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "0070" => {name=>"HM-LC-Dim2L-SM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw:1:2",},#Sw1_V:3:4,Sw2_V:5:6
- "0071" => {name=>"HM-LC-Dim1T-Pl" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "0072" => {name=>"HM-LC-Dim1T-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "0073" => {name=>"HM-LC-Dim1T-FM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},#Sw:1:1,Sw1_V:2:3
- "0074" => {name=>"HM-LC-Dim2T-SM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw:1:2",},#Sw1_V:3:4,Sw2_V:5:6
+ "006E" => {name=>"HM-LC-Dim1L-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},# Sw:1:1,
+ "006F" => {name=>"HM-LC-Dim1L-Pl" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},# Sw:1:1,
+ "0070" => {name=>"HM-LC-Dim2L-SM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw:1:2,Sw1_V:3:4,Sw2_V:5:6",},#
+ "0071" => {name=>"HM-LC-Dim1T-Pl" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},# Sw:1:1,
+ "0072" => {name=>"HM-LC-Dim1T-CV" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},# Sw:1:1,
+ "0073" => {name=>"HM-LC-Dim1T-FM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw1_V:2:3",},# Sw:1:1,
+ "0074" => {name=>"HM-LC-Dim2T-SM" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"Sw:1:2,Sw1_V:3:4,Sw2_V:5:6",},#
"0075" => {name=>"HM-OU-CFM-PL" ,st=>'outputUnit' ,cyc=>'' ,rxt=>'' ,lst=>'3' ,chn=>"Led:1:1,Mp3:2:2",},
"0076" => {name=>"HM-Sys-sRP-Pl" ,st=>'repeater' ,cyc=>'' ,rxt=>'' ,lst=>'2' ,chn=>"",}, # repeater
"0078" => {name=>"HM-Dis-TD-T" ,st=>'switch' ,cyc=>'' ,rxt=>'b' ,lst=>'3' ,chn=>"",}, #
@@ -217,6 +217,7 @@ my %culHmModel=(
"0092" => {name=>"Schueco_263-144" ,st=>'switch' ,cyc=>'' ,rxt=>'c' ,lst=>'4' ,chn=>"",}, # HM Switch Interface 3 switches
"0093" => {name=>"Schueco_263-158" ,st=>'switch' ,cyc=>'' ,rxt=>'c:w' ,lst=>'' ,chn=>"",}, #
"0094" => {name=>"Schueco_263-157" ,st=>'' ,cyc=>'' ,rxt=>'c:w' ,lst=>'' ,chn=>"",}, #
+ "009F" => {name=>"HM-Sen-Wa-Od" ,st=>'sensor' ,cyc=>'28:00' ,rxt=>'c:w' ,lst=>'1,4' ,chn=>"",}, #capacitive filling level sensor
"00A1" => {name=>"HM-LC-SW1-PL2" ,st=>'switch' ,cyc=>'' ,rxt=>'' ,lst=>'3' ,chn=>"",}, #
"00A2" => {name=>"ROTO_ZEL-STG-RM-FZS-2" ,st=>'switch' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",}, #radio-controlled socket adapter switch actuator 1-channel
"00A3" => {name=>"HM-LC-Dim1L-Pl-2" ,st=>'dimmer' ,cyc=>'' ,rxt=>'' ,lst=>'1,3' ,chn=>"",},
@@ -302,6 +303,7 @@ sub CUL_HM_updateConfig($){
if (!$webCmd){
if((length (CUL_HM_hash2Id($hash)) == 6)&&
$hash->{channel_01} &&
+ $st ne "virtual" &&
$st ne "thermostat" ){$webCmd="getConfig";
}elsif($st eq "blindActuator"){$webCmd="toggle:on:off:stop:statusRequest";
}elsif($st eq "dimmer" ){$webCmd="toggle:on:off:statusRequest";
@@ -408,10 +410,11 @@ sub CUL_HM_Rename($$$) {#############################
sub CUL_HM_Parse($$) {#############################
my ($iohash, $msg) = @_;
my $id = CUL_HM_Id($iohash);
+ my $ioName = $iohash->{NAME};
# Msg format: Allnnffttssssssddddddpp...
$msg =~ m/A(..)(..)(..)(..)(......)(......)(.*)/;
- my ($len,$msgcnt,$msgFlag,$msgType,$src,$dst,$p) = ($1,$2,$3,$4,$5,$6,$7);
- $p = "" if(!defined($p));
+ my ($len,$msgcnt,$msgFlag,$msgType,$src,$dst,$p1) = ($1,$2,$3,$4,$5,$6,$7);
+ $p1 = "" if(!defined($p1));
my $cmd = "$msgFlag$msgType"; #still necessary to maintain old style
my $lcm = "$len$cmd";
# $shash will be replaced for multichannel commands
@@ -419,14 +422,13 @@ sub CUL_HM_Parse($$) {#############################
my $dhash = $modules{CUL_HM}{defptr}{$dst};
my $dname = ($dst eq "000000") ? "broadcast" :
($dhash ? $dhash->{NAME} :
- ($dst eq $id ? $iohash->{NAME} :
+ ($dst eq $id ? $ioName :
$dst));
my $target = " (to $dname)";
- my $msgStat;
- ($p,$msgStat) = split(":",$p,2);
+ my ($p,$msgStat,$myRSSI) = split(":",$p1,3);
return "" if($msgStat && $msgStat eq 'NACK');#discard TCP errors from HMlan. Resend will cover it
return "" if($src eq $id);#discard mirrored messages
-
+
$respRemoved = 0; #set to 'no response in this message' at start
if(!$shash) { # Unknown source
# Generate an UNKNOWN event for pairing requests, ignore everything else
@@ -448,7 +450,11 @@ sub CUL_HM_Parse($$) {#############################
my $st = AttrVal($name, "subType", "");
my $model = AttrVal($name, "model", "");
my $tn = TimeNow();
-
+
+ CUL_HM_storeRssi($name,
+ "to_".((hex($msgFlag)&0x40)?"rpt_":"").$ioName,# repeater?
+ $myRSSI);
+
# return if duplicate
my $msgX = "No:$msgcnt - t:$msgType s:$src d:$dst ".($p?$p:"");
@@ -465,7 +471,7 @@ sub CUL_HM_Parse($$) {#############################
return ""; #return something to please dispatcher
}
$shash->{lastMsg} = $msgX;
- $iohash->{HM_CMDNR} = hex($msgcnt) if($dst eq $id);# update messag counter to receiver
+ $iohash->{HM_CMDNR} = hex($msgcnt) if($dst eq $id);# updt message cnt to rec
CUL_HM_DumpProtocol("RCV",$iohash,$len,$msgcnt,$msgFlag,$msgType,$src,$dst,$p);
@@ -735,14 +741,20 @@ sub CUL_HM_Parse($$) {#############################
push @event, "ValveOffset:$of %";
}
}
- elsif($model eq "HM-CC-SCD"){ ###############################################
+ elsif($model eq "HM-Sen-Wa-Od"||
+ $model eq "HM-CC-SCD" ){ ############################################
if (($msgType eq "02" && $p =~ m/^01/) || # handle Ack_Status
($msgType eq "10" && $p =~ m/^06/) || #or Info_Status message here
($msgType eq "41")) {
- my $co2Lvl = substr($p,4,2);
+ my $level = substr($p,4,2);
my %lvl=("00"=>"normal","64"=>"added","C8"=>"addedStrong");
- push @event, "state:".$lvl{$co2Lvl};
- }
+ $level = hex($level) if($model eq "HM-Sen-Wa-Od");
+ $level = $lvl{$level} if($model eq "HM-CC-SCD");
+ push @event, "state:".$level."%";
+
+ my $err = hex(substr($p,6,2));
+ push @event, "battery:".($err&0x80?"low":"ok") if (defined $err);
+ }
}
elsif($st eq "KFM100" && $model eq "KFM-Sensor") { ##########################
if($p =~ m/.14(.)0200(..)(..)(..)/) {# todo very risky - no start...
@@ -863,6 +875,17 @@ sub CUL_HM_Parse($$) {#############################
push @event,"state:$btnName $state$target";
}
}
+ elsif($st eq "repeater"){ ###################################################
+ if (($msgType eq "02" && $p =~ m/^01/) || # handle Ack_Status
+ ($msgType eq "10" && $p =~ m/^06/)) { #or Info_Status message here
+ my ($state,$err) = ($1,hex($2)) if ($p =~ m/^....(..)(..)/);
+ # not sure what level are possible
+ push @event, "state:".($state eq '00'?"ok":"level:".$state);
+ push @event, "battery:". (($err&0x80)?"low" :"ok" );
+ my $flag = ($err>>4) &0x7;
+ push @event, "flags:". (($flag)?"none" :$flag );
+ }
+ }
elsif($st eq "virtual"){#####################################################
# possibly add code to count all acks that are paired.
if($msgType eq "02") {# this must be a reflection from what we sent, ignore
@@ -1165,21 +1188,21 @@ sub CUL_HM_Parse($$) {#############################
next if (!$modules{CUL_HM}{defptr}{$dChId});
my $dChNo = substr($dChId,6,2);
my $dChName = CUL_HM_id2Name($dChId);
- my @peerIDs = split(',',AttrVal($dChName,"peerIDs",""));
if (AttrVal($dChName,"peerIDs","") =~m/$recId/){# is in peerlist?
my $dChHash = CUL_HM_name2Hash($dChName);
$dChHash->{helper}{trgLgRpt} = 0
if (!defined($dChHash->{helper}{trgLgRpt}));
$dChHash->{helper}{trgLgRpt} +=1;
+ my $trgLgRpt = $dChHash->{helper}{trgLgRpt};
my $state = ReadingsVal($dChName,"virtActState","OFF");
my $tNoOld = ReadingsVal($dChName,"virtActTrigNo","0");
$state = ($state eq "OFF")?"ON":"OFF" if ($trigNo ne $tNoOld);
if (hex($msgFlag)&0x20){
$longPress .= "_Release";
- $dhash->{helper}{trgLgRpt}=0;
- CUL_HM_SndCmd($dChHash,$msgcnt."8002".$dst.$src.'01'.$dChNo.
+ $dChHash->{helper}{trgLgRpt}=0;
+ CUL_HM_SndCmd($dhash,$msgcnt."8002".$dst.$src.'01'.$dChNo.
(($state eq "ON")?"C8":"00")."00");
$sendAck = "";
}
@@ -1187,7 +1210,7 @@ sub CUL_HM_Parse($$) {#############################
"virtActState:".$state,
"virtActTrigger:".CUL_HM_id2Name($recId),
"virtActTrigType:".$longPress,
- "virtActTrigRpt:".$dChHash->{helper}{trgLgRpt},
+ "virtActTrigRpt:".$trgLgRpt,
"virtActTrigNo:".$trigNo );
}
}
@@ -1452,6 +1475,20 @@ my %culHmRegDefine = (
lowBatLimit =>{a=> 18.0,s=>1 ,l=>0,min=>10 ,max=>12 ,c=>'factor' ,f=>10 ,u=>'V' ,d=>1,t=>"low batterie limit"},
batDefectLimit =>{a=> 19.0,s=>1 ,l=>0,min=>0.1,max=>2 ,c=>'factor' ,f=>100 ,u=>'Ohm' ,d=>1,t=>"batterie defect detection"},
transmDevTryMax =>{a=> 20.0,s=>1.0,l=>0,min=>1 ,max=>10 ,c=>'' ,f=>'' ,u=>'' ,d=>0,t=>"max message re-transmit"},
+ localResDis =>{a=> 24.0,s=>1.0,l=>0,min=>1 ,max=>1 ,c=>'lit' ,f=>'' ,u=>'' ,d=>0,t=>"local reset disable" ,lit=>{off=>0,on=>1}},
+
+ waterUppThr =>{a=> 6.0,s=>1 ,l=>1,min=>0 ,max=>256 ,c=>'' ,f=>'' ,u=>'' ,d=>1,t=>"water upper threshold"},
+ waterlowThr =>{a=> 7.0,s=>1 ,l=>1,min=>0 ,max=>256 ,c=>'' ,f=>'' ,u=>'' ,d=>1,t=>"water lower threshold"},
+ caseDesign =>{a=> 90.0,s=>1 ,l=>1,min=>1 ,max=>3 ,c=>'lit' ,f=>'' ,u=>'' ,d=>1,t=>"case desing" ,lit=>{verticalBarrel=>1,horizBarrel=>2,rectangle=>3}},
+ caseHigh =>{a=> 94.0,s=>2 ,l=>1,min=>100,max=>10000 ,c=>'' ,f=>'' ,u=>'cm' ,d=>1,t=>"case hight"},
+ fillLevel =>{a=> 98.0,s=>2 ,l=>1,min=>100,max=>300 ,c=>'' ,f=>'' ,u=>'cm' ,d=>1,t=>"fill level"},
+ caseWidth =>{a=>102.0,s=>2 ,l=>1,min=>100,max=>10000 ,c=>'' ,f=>'' ,u=>'cm' ,d=>1,t=>"case width"},
+ caseLength =>{a=>106.0,s=>2 ,l=>1,min=>100,max=>10000 ,c=>'' ,f=>'' ,u=>'cm' ,d=>1,t=>"case length"},
+ meaLength =>{a=>108.0,s=>2 ,l=>1,min=>110,max=>310 ,c=>'' ,f=>'' ,u=>'cm' ,d=>1,t=>""},
+ useCustom =>{a=>110.0,s=>1 ,l=>1,min=>110,max=>310 ,c=>'lit' ,f=>'' ,u=>'' ,d=>1,t=>"use custom" ,lit=>{off=>0,on=>1}},
+
+ fillLvlUpThr =>{a=> 4.0,s=>1 ,l=>4,min=>0 ,max=>255 ,c=>'' ,f=>'' ,u=>'' ,d=>1,t=>"fill level upper threshold"},
+ fillLvlLoThr =>{a=> 5.0,s=>1 ,l=>4,min=>0 ,max=>255 ,c=>'' ,f=>'' ,u=>'' ,d=>1,t=>"fill level lower threshold"},
evtFltrPeriod =>{a=> 1.0,s=>0.4,l=>1,min=>0.5,max=>7.5 ,c=>'factor' ,f=>2 ,u=>'s' ,d=>1,t=>"event filter period"},
evtFltrNum =>{a=> 1.4,s=>0.4,l=>1,min=>1 ,max=>15 ,c=>'' ,f=>'' ,u=>'' ,d=>1,t=>"sensitivity - read sach n-th puls"},
@@ -1582,7 +1619,17 @@ my %culHmRegModel = (
lowBatLimit =>1,batDefectLimit =>1,
transmitTryMax =>1,},
"HM-Sys-sRP-Pl" =>{compMode =>1,},
-);
+
+
+
+ "HM-Sen-Wa-Od" =>{cyclicInfoMsg =>1, transmDevTryMax =>1,
+ localResDis =>1,ledOnTime =>1,transmitTryMax =>1,
+ waterUppThr =>1,waterlowThr =>1,caseDesign =>1,caseHigh =>1,
+ fillLevel =>1,caseWidth =>1,caseLength =>1,meaLength =>1,
+ useCustom =>1,
+ fillLvlUpThr =>1,fillLvlLoThr =>1,
+ expectAES =>1,peerNeedsBurst =>1,},
+ );
my %culHmRegChan = (# if channelspecific then enter them here
"HM-CC-TC02" =>{dispTempHum =>1,dispTempInfo =>1,dispTempUnit =>1,mdTempReg =>1,
mdTempValve =>1,tempComfort =>1,tempLower =>1,partyEndDay =>1,
@@ -3071,7 +3118,9 @@ sub CUL_HM_getConfig($$$$$){
###################-------send related --------################
sub CUL_HM_SndCmd($$) {
my ($hash, $cmd) = @_;
+ $hash = CUL_HM_getDeviceHash($hash);
my $io = $hash->{IODev};
+ return if(!$io);
$cmd =~ m/^(..)(.*)$/;
my ($mn, $cmd2) = ($1, $2);
@@ -3113,7 +3162,7 @@ sub CUL_HM_responseSetup($$) {#store all we need to handle the response
#--- remove readings in channel
my $chnhash = $modules{CUL_HM}{defptr}{"$dst$chn"};
$chnhash = $hash if (!$chnhash);
- $chnhash->{READINGS}{peerList}{VAL}="";#empty old list
+ delete $chnhash->{READINGS}{peerList};#empty old list
$attr{$chnhash->{NAME}}{peerIDs} = '';
return;
}
@@ -3327,7 +3376,12 @@ sub CUL_HM_ID2PeerList ($$$) {
.","; # dont forget separator
}
$attr{$name}{peerIDs} = $peerIDs; # make it public
- readingsSingleUpdate($hash,"peerList",$peerNames,0);
+ if ($peerNames){
+ readingsSingleUpdate($hash,"peerList",$peerNames,0) ;
+ }
+ else{
+ delete $hash->{READINGS}{peerList};
+ }
}
################### Conversions ################
sub CUL_HM_getExpertMode($) { # get expert level for the entity.
@@ -3571,7 +3625,7 @@ my %culHmBits = (
my @culHmCmdFlags = ("WAKEUP", "WAKEMEUP", "CFG", "Bit3",
"BURST", "BIDI", "RPTED", "RPTEN");
#RPTEN 0x80: set in every message. Meaning?
- #RPTED 0x40: ???
+ #RPTED 0x40: repeated (repeater operation)
#BIDI 0x20: response is expected
#Burst 0x10: set if burst is required by device
#Bit3 0x08:
@@ -3675,8 +3729,17 @@ sub CUL_HM_parseCommon(@){#############################
CUL_HM_respPendRm($shash);
$reply = "NACK";
}
+ elsif($subType eq "01"){ #ACKinfo#################
+
+ my $rssi = substr($p,8,2);# --calculate RSSI
+ CUL_HM_storeRssi(CUL_HM_hash2Name($shash),
+ ($dhash?CUL_HM_hash2Name($dhash):$shash->{IODev}{NAME}),
+ (-1)*(hex($rssi)))
+ if ($rssi && $rssi ne '00' && $rssi ne'80');
+ $reply = "ACKStatus";
+ }
else{ #ACK
- $reply = ($subType eq "01")?"ACKStatus":"ACK";
+ $reply = "ACK";
$success = "yes";
}
readingsSingleUpdate($chnhash,"CommandAccepted",$success,1);
@@ -3692,8 +3755,8 @@ sub CUL_HM_parseCommon(@){#############################
}
}
elsif($msgType eq "10"){
- my $subtype = substr($p,0,2);
- if($subtype eq "01"){ #storePeerList#################
+ my $subType = substr($p,0,2);
+ if($subType eq "01"){ #storePeerList#################
if ($pendType eq "PeerList"){
my $chn = $shash->{helper}{respWait}{forChn};
my $chnhash = $modules{CUL_HM}{defptr}{$src.$chn};
@@ -3731,7 +3794,7 @@ sub CUL_HM_parseCommon(@){#############################
return "done";
}
}
- elsif($subtype eq "02" ||$subtype eq "03"){ #ParamResp##################
+ elsif($subType eq "02" ||$subType eq "03"){ #ParamResp==================
if ($pendType eq "RegisterRead"){
my $chnSrc = $src.$shash->{helper}{respWait}{forChn};
my $chnHash = $modules{CUL_HM}{defptr}{$chnSrc};
@@ -3781,7 +3844,7 @@ sub CUL_HM_parseCommon(@){#############################
return "done";
}
}
- elsif($subtype eq "04"){ #ParamChange###################
+ elsif($subType eq "04"){ #ParamChange===================================
my($chn,$peerID,$list,$data) = ($1,$2,$3,$4) if($p =~ m/^04(..)(........)(..)(.*)/);
my $chnHash = $modules{CUL_HM}{defptr}{$src.$chn};
$chnHash = $shash if(!$chnHash); # will add param to dev if no chan
@@ -3806,7 +3869,12 @@ sub CUL_HM_parseCommon(@){#############################
readingsSingleUpdate($chnHash,$regLN,$lN,0);
CUL_HM_updtRegDisp($chnHash,$list,$peerID);
}
- elsif($subtype eq "06"){ #reply to status request#######
+ elsif($subType eq "06"){ #reply to status request=======================
+ my $rssi = substr($p,8,2);# --calculate RSSI
+ CUL_HM_storeRssi(CUL_HM_hash2Name($shash),
+ ($dhash?CUL_HM_hash2Name($dhash):$shash->{IODev}{NAME}),
+ (-1)*(hex($rssi)))
+ if ($rssi && $rssi ne '00' && $rssi ne'80');
#todo = what is the answer to a status request
if ($pendType eq "StatusReq"){#it is the answer to our request
my $chnSrc = $src.$shash->{helper}{respWait}{forChn};
@@ -4246,6 +4314,20 @@ sub CUL_HM_noDupInString($) {#return string with no duplicates, comma separated
my ($str) = @_;
return join ",",CUL_HM_noDup(split ",",$str);
}
+sub CUL_HM_storeRssi(@){
+ my ($name,$peerName,$val) = @_;
+ $defs{$name}{helper}{rssi}{$peerName}{lst} = $val;
+ $defs{$name}{helper}{rssi}{$peerName}{min} = $val if (!$defs{$name}{helper}{rssi}{$peerName}{min} || $defs{$name}{helper}{rssi}{$peerName}{min} > $val);
+ $defs{$name}{helper}{rssi}{$peerName}{max} = $val if (!$defs{$name}{helper}{rssi}{$peerName}{max} || $defs{$name}{helper}{rssi}{$peerName}{max} < $val);
+ $defs{$name}{helper}{rssi}{$peerName}{cnt} ++;
+ if ($defs{$name}{helper}{rssi}{$peerName}{cnt} == 1){
+ $defs{$name}{helper}{rssi}{$peerName}{avg} = $val;
+ }
+ else{
+ $defs{$name}{helper}{rssi}{$peerName}{avg} += ($val - $defs{$name}{helper}{rssi}{$peerName}{avg}) /$defs{$name}{helper}{rssi}{$peerName}{cnt};
+ }
+ return ;
+}
1;
@@ -4587,6 +4669,12 @@ sub CUL_HM_noDupInString($) {#return string with no duplicates, comma separated
dimmer, blindActuator
+ Dimmer may support virtual channels. Those are autocrated if applicable. Usually there are 2 virtual channels
+ in addition to the primary channel. Virtual dimmer channels are inactive by default but can be used in
+ in parallel to the primay channel to control light.
+ Virtual channels have default naming SW_V. e.g. Dimmer_SW1_V1 and Dimmer_SW1_V2.
+ Dimmer virtual channels are completely different from FHEM virtual buttons and actors but
+ are part of the HM device. Documentation and capabilities for virtual channels is out of scope.
- 0 - 100 [on-time] [ramp-time]
set the actuator to the given value (in percent)