diff --git a/CHANGED b/CHANGED
index 6650cf4e1..da800f392 100644
--- a/CHANGED
+++ b/CHANGED
@@ -1,5 +1,6 @@
 # Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
 # Do not insert empty lines here, update check depends on it.
+ - feature  mqtt2.template: add speech recognition extensions
  - bugfix:  73_AutoShuttersControl: fix AntiFreeze_Fn
  - feature  14_SD_UT: new model remote control Novy_840039
  - bugfix:  88_Timer: fix2 list "Probably associated with" Forum: #1015549
diff --git a/FHEM/lib/AttrTemplate/mqtt2.template b/FHEM/lib/AttrTemplate/mqtt2.template
index 6ede8c32f..f2490e1f1 100644
--- a/FHEM/lib/AttrTemplate/mqtt2.template
+++ b/FHEM/lib/AttrTemplate/mqtt2.template
@@ -51,6 +51,58 @@ setreading DEVCID associatedWith DEVICE
 farewell:template has been applied successfully. Be carefull when extending the brigeRegexp!
 attr DEVCID model MQTT2_CLIENT_general_bridge
 
+###########################################
+# speech recognition extensions
+# see forum thread here: https://forum.fhem.de/index.php/topic,99195.0.html
+name:mqtt2_speech_recognition_type_switch
+filter:TYPE=MQTT2_DEVICE:FILTER=CID=speechrecognTesting
+order:100001
+option:{my @devices=devspec2array("TYPE=(siri|alexa|gassistant)");;return 1 if $devices[0];;return 0}
+attr DEVICE genericDeviceType switch
+option:TYPE=siri
+option:TYPE=alexa
+option:TYPE=gassistant
+
+name:mqtt2_speech_recognition_type_light
+filter:TYPE=MQTT2_DEVICE:FILTER=CID=speechrecognTesting
+order:100002
+option:{my @devices=devspec2array("TYPE=(siri|alexa|gassistant)");;return 1 if $devices[0];;return 0}
+attr DEVICE genericDeviceType light
+option:TYPE=siri
+option:TYPE=alexa
+option:TYPE=gassistant
+
+name:mqtt2_speech_recognition_type_light_255
+filter:TYPE=MQTT2_DEVICE:FILTER=CID=speechrecognTesting
+order:100003
+option:{my @devices=devspec2array("TYPE=(siri|alexa|gassistant)");;return 1 if $devices[0];;return 0}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
+attr DEVICE genericDeviceType light
+attr DEVICE homebridgeMapping Brightness=brightness::brightness,minValue=0,maxValue=255
+option:TYPE=siri
+option:TYPE=alexa
+option:TYPE=gassistant
+
+name:mqtt2_speech_recognition_type_blind
+filter:TYPE=MQTT2_DEVICE:FILTER=CID=speechrecognTesting
+order:100004
+option:{my @devices=devspec2array("TYPE=(siri|alexa|gassistant)");;return 1 if $devices[0];;return 0}
+attr DEVICE genericDeviceType blind
+option:TYPE=siri
+option:TYPE=alexa
+option:TYPE=gassistant
+
+name:mqtt2_speech_recognition_type_thermostate
+filter:TYPE=MQTT2_DEVICE:FILTER=CID=speechrecognTesting
+order:100005
+option:{my @devices=devspec2array("TYPE=(siri|alexa|gassistant)");;return 1 if $devices[0];;return 0}
+attr DEVICE genericDeviceType thermostate
+option:TYPE=siri
+option:TYPE=alexa
+option:TYPE=gassistant
+
+
+
 ###########################################
 # zigbee2mqtt
 # The zigbee2mqtt bridge device (entire hex id of devices as bridgeRegexp)
@@ -136,6 +188,7 @@ attr DEVICE setList \
   off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}
 attr DEVICE setStateList on off
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_dimmer
 
 # A dimmable color light connected via zigbee2mqtt
@@ -154,6 +207,7 @@ attr DEVICE setList \
   off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_cct
 
 #source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
@@ -175,6 +229,7 @@ attr DEVICE setList \
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
 attr DEVICE userReadings hex:color_y.* {Color::xyY2hex(ReadingsVal($name,"color_x",0),ReadingsVal($name,"color_y",0),ReadingsVal($name,"brightness",254))}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgb_hex
 
 name:zigbee2mqtt_light_rgb_rgb
@@ -194,6 +249,7 @@ attr DEVICE setList \
   off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgb_rgb
 
 #source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
@@ -218,6 +274,7 @@ attr DEVICE setList \
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
 attr DEVICE userReadings hex:color_y.* {Color::xyY2hex(ReadingsVal($name,"color_x",0),ReadingsVal($name,"color_y",0),ReadingsVal($name,"brightness",254))}  
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgbw_hex
 
 #source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
@@ -239,6 +296,7 @@ attr DEVICE setList \
   white:noArg BASE_TOPIC/DEV_ID/set {"color_temp": 154 , "color_temp": 500}\
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgbw_rgb
 
 #source post: https://forum.fhem.de/index.php/topic,96985.msg902627.html#msg902627
@@ -260,6 +318,7 @@ attr DEVICE setList \
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
   hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgbcct_hex
 
 #source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
@@ -281,6 +340,7 @@ attr DEVICE setList \
   brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
   color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
   color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model zigbee2mqtt_light_rgbcct_rgb
 
 name:zigbee2mqtt_smokeDetector
@@ -318,6 +378,7 @@ attr DEVICE setList \
   on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
   off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
 attr DEVICE setStateList on off
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model zigbee2mqtt_plug
 
 name:zigbee2mqtt_plug_w_energy_measuring
@@ -331,6 +392,7 @@ attr DEVICE icon ICON
 set DEVICE attrTemplate zigbee2mqtt_smart+plug
 #missing readingList with sth. comparable to shellies/shellyplug-s-123456/relay/0/power:.* { my $limit = 100;; my $compare = $EVTPART0<$limit ? "off":"on";; ReadingsVal($NAME,"loadState","on") eq $compare ? undef: {loadState => $compare} } 
 #and additional devStateIcon
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model zigbee2mqtt_plug_w_energy_measuring
 
 # zigbee2mqtt 2 channel device
@@ -352,6 +414,7 @@ attr DEVICE setStateList on off
 deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
 setreading DEVICE associatedWith DEVICE_CH2
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model zigbee2mqtt_2channel_split
 copy DEVICE DEVICE_CH2
 attr DEVICE_CH2 comment Channel 2 for DEVICE
@@ -362,6 +425,7 @@ attr DEVICE_CH2 setList \
 attr DEVICE_CH2 setStateList on off toggle
 deletereading -q DEVICE_CH2 (?!associatedWith).*
 attr DEVICE_CH2 jsonMap state_l1:0 state_l2:state state:0 consumption:0 linkquality:0 power:0 temperature:0
+set DEVICE_CH2 attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE_CH2 model zigbee2mqtt_2channel_split
 
 # zigbee2mqtt 2 channel device with buttons, forum #102866
@@ -492,6 +556,7 @@ attr DEVICE icon ICON
 attr DEVICE stateFormat click
 attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
 deletereading -q DEVICE (?!associatedWith).*
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model zigbee2mqtt_Light_Switch
 
 #source post: https://forum.fhem.de/index.php/topic,94495.msg916789.html#msg916789
@@ -583,6 +648,7 @@ deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE setStateList on off toggle
 attr DEVICE comment NOTE: For on-for-timer SetExtensions are used. You may add on-for-timer option running on the device. The following is limited to 1h max duration, but will not affect future simple "on" commands:<br>on-for-timer {my $duration = $EVTPART1*10; 'cmnd/CMNDTOPIC/Backlog POWER1 1; delay '.$duration.'; POWER1 0'}<br>See the "Praxisbeispiele" in the wiki for "pulseTime1" alternative option and it's restrictions.
 attr DEVICE autocreate 0
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model tasmota_basic_state_power1
 
 # sonoff 1 channel device flashed with Tasmota.
@@ -699,8 +765,8 @@ attr DEVICE_CH2 comment Channel 2 (USB outlets) for DEVICE
 setreading DEVICE_CH2 associatedWith DEVICE
 attr DEVICE_CH2 devStateIcon on:usb:off off:usb@red:on
 attr DEVICE_CH2 setStateList on off toggle
-attr DEVICE model tasmota_POW_USB_split
-attr DEVICE_CH2 model tasmota_POW_USB_split
+set DEVICE_CH2 attrTemplate mqtt2_speech_recognition_type_switch
+attr DEVICE,DEVICE_CH2 model tasmota_POW_USB_split
 
 # plug with LED flashed with Tasmota.
 name:tasmota_plug_with_rgbw_split
@@ -738,8 +804,8 @@ attr DEVICE_CH2 webCmdLabel Helligkeit\
 attr DEVICE_CH2 devStateIcon {Color::devStateIcon($name,"rgb","Color","pct","state")}
 attr DEVICE_CH2 setStateList on off toggle
 deletereading -q DEVICE_CH2 (?!associatedWith).*
-attr DEVICE model tasmota_plug_with_rgbw_split
-attr DEVICE_CH2 model tasmota_plug_with_rgbw_split
+set DEVICE_CH2 attrTemplate mqtt2_speech_recognition_type_light_255
+attr DEVICE,DEVICE_CH2 model tasmota_plug_with_rgbw_split
 
 #tasmota device with Infrared-circuit
 name:tasmota_ir
@@ -847,6 +913,7 @@ set DEVICE attrTemplate tasmota_basic_state_power1
 par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
 attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
 setreading DEVICE associatedWith DEVICE_CH2
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 copy DEVICE DEVICE_CH2
 attr DEVICE_CH2 readingList \
   STATTOPIC/POWER2:.* state
@@ -858,8 +925,7 @@ attr DEVICE_CH2 setList \
   on:noArg     CMNDTOPIC/POWER2 1\
   toggle:noArg CMNDTOPIC/POWER2 2
 attr DEVICE_CH2 setStateList on off toggle
-attr DEVICE model tasmota_2channel_split
-attr DEVICE_CH2 model tasmota_2channel_split
+attr DEVICE,DEVICE_CH2 model tasmota_2channel_split
 
 #contributed by 87insane
 # tasmota 2ch as shutter device.
@@ -911,6 +977,7 @@ Use the "set x_configuration" Option. Example: "set x_configuration ShutterOpenD
 Shutter specific commands available: ShutterOpenDuration1, ShutterCloseDuration1, ShutterRelay1, ShutterSetHalfway1, ShutterSetClose1, ShutterInvert1, ShutterMotordelay1, ShutterCalibration1; you may use this for general setOptions in tasmota also.\
 commands may need restart to take effect.\
 For calibration, use of more than one shutter device and further information on the available commands see <a href="https://github.com/arendst/Tasmota/wiki/blinds-and-roller-shades">Tasmota wiki</a>.
+set DEVICE attrTemplate mqtt2_speech_recognition_type_blind
 farewell:template has been applied successfully. Now it's recommended to set shutter's open and close duration and 50% position, see short instruction in comment attribute or the <br><a href="https://github.com/arendst/Tasmota/wiki/blinds-and-roller-shades">Tasmota wiki</a>.
 attr DEVICE model tasmota_2ch_shutter_invert_1
 
@@ -963,10 +1030,7 @@ attr DEVICE_CH4 readingList \
   STATTOPIC/POWER4:.* state
 attr DEVICE_CH4 setStateList on off toggle
 #set the model attr for all new devices
-attr DEVICE model tasmota_4channel_split
-attr DEVICE_CH2 model tasmota_4channel_split
-attr DEVICE_CH3 model tasmota_4channel_split
-attr DEVICE_CH4 model tasmota_4channel_split
+attr DEVICE,DEVICE_CH2,DEVICE_CH3,DEVICE_CH4 model tasmota_4channel_split
 
 # tasmota 4ch as one FHEM device.
 name:tasmota_4ch_unified_icon
@@ -1050,6 +1114,7 @@ deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE autocreate 0
 attr DEVICE devStateIcon {Color::devStateIcon($name,"rgb","Color","Dimmer","state")}
 attr DEVICE webCmd Color:Color ff0000:Color 00ff00:Color 0000ff:toggle:on:off
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model tasmota_rgb_led_controller
 
 name:tasmota_rgbw_led
@@ -1085,6 +1150,7 @@ attr DEVICE webCmdLabel Helligkeit\
 :Farbe:
 attr DEVICE devStateIcon {Color::devStateIcon($name,"rgb","Color","pct","state")}
 attr DEVICE setStateList on off toggle
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model tasmota_rgbw_led
 
 name:tasmota_rgbwct_led
@@ -1110,6 +1176,7 @@ attr DEVICE webCmdLabel Helligkeit\
 :Weiss\
 :Farbe\
 :Temp
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model tasmota_rgbwct_led
 
 #source post: https://forum.fhem.de/index.php/topic,105364.0.html
@@ -1134,6 +1201,7 @@ attr DEVICE devStateIcon off:light_light_dim_00:on on:light_light_dim_90:off
 attr DEVICE webCmd Dimmer
 attr DEVICE comment After applying the template, the device to be controlled needs further configuration. For the necessary steps see <a href="https://github.com/arendst/Tasmota/wiki/TuyaMCU-Configurations#dimmer">Tasmota wiki</a> instructions.
 farewell:template has been applied successfully. Now it's recommended to do some configruation, see <a href="https://github.com/arendst/Tasmota/wiki/TuyaMCU-Configurations#dimmer">Tasmota wiki</a> instructions.
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model tasmota_TuyaMCU_dimmer
 
 name:tasmota_set_lowercase_texts_and_state1
@@ -1185,6 +1253,7 @@ attr DEVICE readingList \
 attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"online","false") eq "false" ? "rot" : ReadingsVal($name,"new_fw","false") eq "true" ? "gelb" : "gruen";; my $light = ReadingsVal($name,"state","off");; my $show = '<a href="';;$show .= $onl eq "gelb" ? "/fhem?cmd.dummy=set $name x_update&XHR=1\">" : "http://".ReadingsVal($name,"ip","none").' "target="_blank">';;$show .= FW_makeImage("10px-kreis-".$onl)."</a>";; "<div> $show <a href=\"/fhem?cmd.dummy=set $name toggle&XHR=1\">".FW_makeImage($light)."</a></div>" }
 deletereading -q DEVICE (?!associatedWith).*
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model shelly1
 
 name:shelly_announces
@@ -1241,6 +1310,7 @@ attr DEVICE comment To get appropriate loadState values: Change the default limi
 attr DEVICE webCmd :
 deletereading -q DEVICE (?!associatedWith).*
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_switch
 attr DEVICE model shelly1_w_energy_meassuring
 
 name:shelly1_w_energy_meassuring_washer_example
@@ -1283,6 +1353,7 @@ attr DEVICE stateFormat pct
 deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE setStateList open close stop
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_blind
 attr DEVICE model shelly2_roller
 
 # shelly25 using original firmware in roller mode.
@@ -1328,6 +1399,7 @@ state
 deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE setStateList open close half stop pct
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_blind
 attr DEVICE model shelly25_roller_invert_0
 
 name:shelly25_roller_invert_1
@@ -1371,6 +1443,7 @@ state
 deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE setStateList open close half stop pct
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_blind
 attr DEVICE model shelly25_roller_invert_1
 
 # shelly2 using original firmware.
@@ -1555,6 +1628,7 @@ attr DEVICE webCmd on:off:pct:ct:rgb
 #attr DEVICE genericDeviceType light
 attr DEVICE jsonMap brightness:pct
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model shellybulb
 
 # shellyht using original firmware
@@ -1623,6 +1697,7 @@ attr DEVICE webCmd on:off:white:gain:rgb:effect
 attr DEVICE setStateList on off
 attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"online","false") eq "true"?"10px-kreis-gruen":"10px-kreis-rot";; my $light = ReadingsVal($name,"state","off");; my $cons = ReadingsVal($name,"power","unknown");; "<a href=\"http://".ReadingsVal($name,"ip","none")." \"target=\"_blank\">".FW_makeImage($onl)."</a> <a href=\"/fhem?cmd.dummy=set $name toggle&XHR=1\">".FW_makeImage($light)."</a><div>Verbrauch: $cons</div>"}
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model shelly2rgbw_color
 
 #contributed by user sledge
@@ -1649,6 +1724,7 @@ setreading DEVICE associatedWith DEVICE_CH1,DEVICE_CH2,DEVICE_CH4
 attr DEVICE webCmd on:off:pct
 set DEVICE x_mqttcom announce
 attr DEVICE jsonMap brightness:pct
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model shelly2rgbw_4w_split
 attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
 attr DEVICE autocreate 0
@@ -1714,6 +1790,7 @@ attr DEVICE webCmd pct:on:off
 attr DEVICE jsonMap brightness:pct
 attr DEVICE devStateIcon {my $lderr = ReadingsVal($name,"loaderror","true") eq "true"?"10px-kreis-rot":"10px-kreis-gruen";; my $light = ReadingsVal($name,"ison","false") eq "true"?"on":"off";; my $cons = ReadingsVal($name,"light_0_power","unknown");; FW_makeImage($lderr)."<a href=\"/fhem?cmd.dummy=set $name toggle&XHR=1\">".FW_makeImage($light)."</a><div>Leistung: $cons</div>"}
 set DEVICE x_mqttcom announce
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light
 attr DEVICE model shellydimmer
 
 ###############
@@ -1823,6 +1900,7 @@ attr DEVICE setStateList on off
 attr DEVICE stateFormat mode\
 desired-temp °C
 attr DEVICE webCmd mode:desired-temp
+set DEVICE attrTemplate mqtt2_speech_recognition_type_thermostate
 attr DEVICE model ems-esp_thermostat_simple
 
 name:ems-esp_thermostat_RC35_type
@@ -1836,12 +1914,10 @@ attr DEVICE setList mode:uzsuSelectRadio,auto,manual BASEPATH/thermostat_cmd_mod
   daytemp:slider,15.0,0.5,30.0,1 BASEPATH/thermostat_cmd_daytemp1 $EVTPART1\
   nighttemp:slider,15.0,0.5,30.0,1 BASEPATH/thermostat_cmd_nighttemp1 $EVTPART1\
   holidaytemp:slider,15.0,0.5,30.0,1 BASEPATH/thermostat_cmd_holidayttemp1 $EVTPART1
+set DEVICE attrTemplate mqtt2_speech_recognition_type_thermostate
 attr DEVICE model ems-esp_thermostat_RC35_type
 
 
-
-
-
 ###############
 #ESP Milight Hub
 #use this with Chris Mullins ESP-Milight-Hub. for further details visit https://github.com/sidoh/esp8266_milight_hub
@@ -1898,6 +1974,7 @@ attr DEVICE userReadings hex:color_r.* {Color::rgb2hex(ReadingsVal($name,"color_
 attr DEVICE setStateList on off
 attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
 attr DEVICE setExtensionsEvent 1
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model esp_milight_hub_rgbw_bulb
 
 #rgbw-group
@@ -1927,6 +2004,7 @@ attr milight_REMOTE_ID_0 setList\
 attr milight_REMOTE_ID_0 setStateList on off
 #attr milight_REMOTE_ID_0 userReadings rgb:color_r.* {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
 modify milight_REMOTE_ID_0 milight_REMOTE_ID_0
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr milight_REMOTE_ID_0 model esp_milight_hub_make_rgbw_group
 
 #rgbw_cct-bulb
@@ -1969,6 +2047,7 @@ attr DEVICE webCmdLabel   brightness:dim\
 attr DEVICE setStateList on off
 # computed_color will send RGB = 255,255,255 when in white mode. This is useful for HomeAssistant where it always expects the color to be set.
 attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model esp_milight_hub_rgb_cct_bulb
 
 #cct-only-bulb
@@ -2004,6 +2083,7 @@ attr DEVICE webCmdLabel :dim\
   :::
 attr DEVICE setStateList on off
 attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model esp_milight_hub_cct_only_bulb
 
 #rgbw-bulb
@@ -2046,6 +2126,7 @@ attr DEVICE webCmdLabel An:Aus\
   :Sättigung:Modus
 attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
 attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model esp_milight_hub_max_features_bulb
 
 #remote for event generation only
@@ -2327,6 +2408,7 @@ deletereading -q DEVICE (?!associatedWith).*
 attr DEVICE devStateIcon {Color::devStateIcon( $name, "rgb", "rgb", "brightness", "state" )}
 attr DEVICE webCmd rgb:brightness
 attr DEVICE comment For questions about the use of different widgets for color selection see discussion at https://forum.fhem.de/index.php/topic,98880.msg995308.html
+set DEVICE attrTemplate mqtt2_speech_recognition_type_light_255
 attr DEVICE model wled_controller
 
 #source post: https://forum.fhem.de/index.php/topic,105457.msg993924.html#msg993924