diff --git a/fhem/FHEM/lib/AttrTemplate/zwave.template b/fhem/FHEM/lib/AttrTemplate/zwave.template index eefef67af..de5075c44 100644 --- a/fhem/FHEM/lib/AttrTemplate/zwave.template +++ b/fhem/FHEM/lib/AttrTemplate/zwave.template @@ -30,7 +30,7 @@ deletereading -q TYPE=ZWave (UNPARSED|SEND_DATA|CMD) name:zwave_get_myutils_from_svn filter:TYPE=ZWave -desc:template to download or update additional code from svn +desc:template to download or update additional code from svn. Code ist necessary for quite a lot of these templates to work, so first do this... order:000002 { Svn_GetFile("contrib/AttrTemplate/99_attrT_ZWave_Utils.pm", "FHEM/99_attrT_ZWave_Utils.pm", sub(){CommandReload(undef, "99_attrT_ZWave_Utils")}) } @@ -52,7 +52,10 @@ name:FGRM222_Roller_Mode filter:TYPE=ZWave order:01Fibaro000005 desc:Applies to Fibaro FGRM222 devices. This is for normal shutter mode. For other modes use different attrTemplates if available or manual configuration. -farewell:Things to be done manually: configure switch type (configSwitchType). +farewell:No Problem encountered, enjoy! +par:RADIO_SCENES_ACTIVATION;Send scenes events when buttons are pressed;{ undef } +par:RADIO_ASSOCIATIONS_ACTIVATION;Do not send scene events when buttons are pressed;{ undef } +par:SWITCHTYPE;Possible values: 0-2 (0=MomentarySwitches, 1=ToggleSwitches, 2=SingleMomentarySwitch);{ undef } par:CALLSPEECHRECOGN;Set this to 0 to not set any speech recogn. related attributes;{ 1 } par:ICON;ICON as set, defaults to fts_shutter_updown;{ AttrVal("DEVICE","icon","fts_shutter_updown") } attr DEVICE icon ICON @@ -63,6 +66,11 @@ attr DEVICE cmdIcon stop:fts_shutter_manual attr DEVICE widgetOverride dim:colorpicker,BRI,0,1,99 set DEVICE configRollerShutterOperatingModes 1RollerBlindModeWithPositioning set DEVICE configReportsType BlindPositionReportsSentToThe0 +set DEVICE configByte 14 SWITCHTYPE +option:{ RADIO_SCENES_ACTIVATION } +set DEVICE configScenesAssociationsActivation ScenesActivation +option:{ RADIO_ASSOCIATIONS_ACTIVATION } +set DEVICE configScenesAssociationsActivation AssociationsActivation option:{ CALLSPEECHRECOGN } set DEVICE attrTemplate speechcontrol_type_blind #closing section @@ -76,7 +84,10 @@ name:FGRM222_Ventian_Blind_Mode filter:TYPE=ZWave order:01Fibaro000005a desc:Applies to Fibaro FGRM222 devices. This is for venetian blind mode. For other modes use differnt attrTemplates or manual configuration. Note: additional code needed - has to be downloaded seperately from svn. -farewell:Things to be done manually: configure switch type (configSwitchType) and turning time for lamellas (configInVenetianBlindModeTheParameter12). +farewell:Things to be done manually: adopt turning time for lamellas (configInVenetianBlindModeTheParameter12) if needed. +par:RADIO_SCENES_ACTIVATION;Send scenes events when buttons are pressed;{ undef } +par:RADIO_ASSOCIATIONS_ACTIVATION;Do not send scene events when buttons are pressed;{ undef } +par:SWITCHTYPE;Possible values: 0-2 (0=MomentarySwitches, 1=ToggleSwitches, 2=SingleMomentarySwitch);{ undef } par:CALLSPEECHRECOGN;Set this to 0 to not set any speech recogn. related attributes;{ 1 } par:ICON;ICON as set, defaults to fts_shutter_updown;{ AttrVal("DEVICE","icon","fts_shutter_updown") } attr DEVICE icon ICON @@ -88,7 +99,12 @@ attr DEVICE devStateIcon { FHEM::attrT_ZWave_Utils::devStateIcon_shutter($name," set DEVICE configRollerShutterOperatingModes 2VenetianBlindModeWith2 set DEVICE configReportsType BlindPositionReportsSentToThe1 set DEVICE configSetLamellasBackToPrevious13 0LamellasReturnToPreviouslySet0 +set DEVICE configByte 14 SWITCHTYPE attr DEVICE userReadings dim:power..0.0.W {my $pos = ReadingsVal($name,"state",0) =~ m,dim, ? ReadingsNum($name,"state",0) : ReadingsNum($name,"dim",0);; my $pos1 = ReadingsNum($name,"position",0);; $pos = $pos1 if ($pos > $pos1 +3 || $pos < $pos1 -3);; return $pos }, positionSlat:power..0.0.W {ReadingsVal($name,"position",0) =~ m,Slat.([0-9]+),?$1:undef} +option:{ RADIO_SCENES_ACTIVATION } +set DEVICE configScenesAssociationsActivation ScenesActivation +option:{ RADIO_ASSOCIATIONS_ACTIVATION } +set DEVICE configScenesAssociationsActivation AssociationsActivation option:{ CALLSPEECHRECOGN } set DEVICE attrTemplate speechcontrol_type_blind #closing section @@ -135,7 +151,10 @@ name:FGR223_Roller_Mode filter:TYPE=ZWave order:01Fibaro000006 desc:Applies to Fibaro FGR223 devices. This is for normal shutter mode. For other modes use different attrTemplates if available or manual configuration. -farewell:Things to be done manually: configure switch type (configSwitchType). +farewell:No Problem encountered, enjoy! In case you activated scene events at keypresses, events will be shown in the main channel device. +par:RADIO_SCENES_ACTIVATION;Send scenes events when buttons are pressed;{ undef } +par:RADIO_ASSOCIATIONS_ACTIVATION;Do not send scene events when buttons are pressed;{ undef } +par:SWITCHTYPE;Possible values: 0-2 (0=MomentarySwitches, 1=ToggleSwitches, 2=SingleMomentarySwitch);{ undef } par:CALLSPEECHRECOGN;Set this to 0 to not set any speech recogn. related attributes;{ 1 } par:MAINCHANNEL;Main channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",0) } par:CHANNEL01;First channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",1) } @@ -148,14 +167,20 @@ attr CHANNEL01 webCmd dim attr CHANNEL01 widgetOverride dim:colorpicker,BRI,0,1,99 attr CHANNEL01 userReadings dim:(dim|reportedState).* {$1 =~ /reportedState/ ? ReadingsNum($name,"reportedState",0):ReadingsNum($name,"state",0)} set MAINCHANNEL configEnergyReportsOnChange 10 +option:{ RADIO_SCENES_ACTIVATION } set MAINCHANNEL configS1SwitchScenesSent 15 set MAINCHANNEL configS2SwitchScenesSent 15 +option:{ RADIO_ASSOCIATIONS_ACTIVATION } +set MAINCHANNEL configS1SwitchScenesSent 0 +set MAINCHANNEL configS2SwitchScenesSent 0 +option:{ 1 } +set MAINCHANNEL configByte 20 SWITCHTYPE set MAINCHANNEL configOperatingMode RollerBlind set MAINCHANNEL configForceCalibration ForceDeviceCalibration option:{ CALLSPEECHRECOGN } set CHANNEL01 attrTemplate speechcontrol_type_blind #closing section -option:{ 1 } +option:{ 1 } get MAINCHANNEL configAll get MAINCHANNEL associationAll { fhem "trigger $FW_wname JS:location.href='$FW_ME?room=%23devspec%3dMAINCHANNEL,CHANNEL01,CHANNEL02'" if($cl && $cl->{TYPE} eq "FHEMWEB") } @@ -165,7 +190,10 @@ name:FGR223_Venetian_Mode filter:TYPE=ZWave order:01Fibaro000006a desc:Applies to Fibaro FGR223 devices. This is for venetian blind mode. For other modes use differnt attrTemplates or manual configuration.
The template is based on this forum thread. -farewell:Things to be done manually: configure switch type (configSwitchType). +farewell:Things to be done manually: adopt turning time for lamellas (configVenetianBlindTimeOfFullTurnOfThe152) if needed. In case you activated scene events at keypresses, events will be shown in the main channel device. +par:RADIO_SCENES_ACTIVATION;Send scenes events when buttons are pressed;{ undef } +par:RADIO_ASSOCIATIONS_ACTIVATION;Do not send scene events when buttons are pressed;{ undef } +par:SWITCHTYPE;Possible values: 0-2 (0=MomentarySwitches, 1=ToggleSwitches, 2=SingleMomentarySwitch);{ undef } par:CALLSPEECHRECOGN;Set this to 0 to not set any speech recogn. related attributes;{ 1 } par:MAINCHANNEL;Main channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",0) } par:CHANNEL01;First channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",1) } @@ -178,9 +206,15 @@ attr CHANNEL01 webCmd dim attr CHANNEL01 widgetOverride dim:colorpicker,BRI,0,1,99 attr CHANNEL01 userReadings dim:(dim|reportedState).* {$1 =~ /reportedState/ ? ReadingsNum($name,"reportedState",0):ReadingsNum($name,"state",0)} set MAINCHANNEL configEnergyReportsOnChange 10 +option:{ RADIO_SCENES_ACTIVATION } set MAINCHANNEL configS1SwitchScenesSent 15 set MAINCHANNEL configS2SwitchScenesSent 15 +option:{ RADIO_ASSOCIATIONS_ACTIVATION } +set MAINCHANNEL configS1SwitchScenesSent 0 +set MAINCHANNEL configS2SwitchScenesSent 0 +option:{ 1 } set MAINCHANNEL configOperatingMode VenetianBlind +set MAINCHANNEL configByte 20 SWITCHTYPE set MAINCHANNEL configForceCalibration ForceDeviceCalibration option:{ CALLSPEECHRECOGN } set CHANNEL01 attrTemplate speechcontrol_type_blind @@ -201,7 +235,7 @@ desc:Templates for AEOTEC/AEON Labs devices.Manufacturer info can be found NOTE: early, untested version!
The template is based on this forum thread, manufacturer info can be found here. Having an up-to-date firmware is highly recommended +desc:Applies to AEON Labs ZW095 Home Energy Meter Gen5 .
NOTE: early, untested version!
The template is based on this forum thread, manufacturer info can be found here. par:MAINCHANNEL;Main channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",0) } par:CHANNEL01;First channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",1) } par:CHANNEL02;Second channel of the device - do not proceed if it can't be identified!;{ FHEM::attrT_ZWave_Utils::identify_channel_devices("DEVICE",2) } @@ -223,7 +257,42 @@ get MAINCHANNEL associationAll { fhem "trigger $FW_wname JS:location.href='$FW_ME?room=%23devspec%3dMAINCHANNEL,CHANNEL01,CHANNEL02,CHANNEL03'" if($cl && $cl->{TYPE} eq "FHEMWEB") } setreading DEVICE attrTemplateVersion ZW095_Home_Energy_Meter_20200930 -name:ZW100_Multisensor + +name:ZW100_Multisensor_Battery filter:TYPE=ZWave order:03AEOTEC0000ZW100 -desc:Having an up-to-date firmware is highly recommended +desc:Applies to AEON Labs ZW100 MultiSensor 6 when battery powered.
NOTE: early version!
The template is based on this , manufacturer info can be found here. Having an up-to-date firmware is highly recommended! +par:RADIO_REPORT_UV;Send also UV values;{ undef } +par:RADIO_NO_UV_REPORT;Do not send UV values;{ undef } +set DEVICE configGroup1Interval 3600 +set DEVICE configByte 40 0 +#configReportOnlyOnThresholds Disabled +option:{ RADIO_REPORT_UV} +set DEVICE configGroup1Reports 241 +option:{ RADIO_NO_UV_REPORT } +set DEVICE configGroup1Reports 113 +option:{ 1 } +get DEVICE configGroup1Interval +get DEVICE configReportOnlyOnThresholds +get DEVICE configGroup1Reports +setreading DEVICE attrTemplateVersion ZW100_Multisensor_Battery_20201006 + + +name:ZW100_Multisensor_USB +filter:TYPE=ZWave +order:03AEOTEC0000ZW100a +desc:Applies to AEON Labs ZW100 MultiSensor 6 when powered over USB.
NOTE: early version!
The template is based on this , manufacturer info can be found here. Having an up-to-date firmware is highly recommended! +par:RADIO_REPORT_UV;Send also UV values;{ undef } +par:RADIO_NO_UV_REPORT;Do not send UV values;{ undef } +set DEVICE configGroup1Interval 30 +set DEVICE configByte 40 1 +#configReportOnlyOnThresholds Enabled +option:{ RADIO_REPORT_UV} +set DEVICE configGroup1Reports 240 +option:{ RADIO_NO_UV_REPORT } +set DEVICE configGroup1Reports 112 +#closing section +option:{ 1 } +get DEVICE configAll +setreading DEVICE attrTemplateVersion ZW100_Multisensor_USB_20201006 +