diff --git a/FHEM/10_EnOcean.pm b/FHEM/10_EnOcean.pm index 8ec0053bd..14625fc17 100755 --- a/FHEM/10_EnOcean.pm +++ b/FHEM/10_EnOcean.pm @@ -20,6 +20,10 @@ my %EnO_rorgname = ("F6"=>"switch", # org 05, RPS my @EnO_ptm200btn = ("AI", "A0", "BI", "B0", "CI", "C0", "DI", "D0"); my %EnO_ptm200btn; +# Peha House Control System (PHC) +# PHC Gateway Commands +my @EnO_phcCmd = ("switching", "dimming", "setpointShift", "setpointBasic", "controlVar", "fanStage"); + # Some Manufacturers (e.g. Jaeger Direkt) also sell EnOcean products without an # entry in the table below. This table is only needed for A5 category devices. my %EnO_manuf = ( @@ -124,6 +128,7 @@ my %EnO_subType = ( "A5.20.01" => "MD15", "A5.30.01" => "digitalInput.01", "A5.30.02" => "digitalInput.02", + "A5.38.08" => "phcGateway", "A5.3F.7F" => "manufProfile", 1 => "switch", 2 => "contact", @@ -174,8 +179,8 @@ EnOcean_Initialize($) "showtime:1,0 loglevel:0,1,2,3,4,5,6 ". "model:".join(",",@EnO_models)." ". "subType:".join(",",values %EnO_subType)." ". - "actualTemp dimTime dimValueOn manufID shutTime ". - "subDef subDef0 subDefI ". + "actualTemp dimTime dimValueOn manufID phcCmd ". + "rampTime shutTime subDef subDef0 subDefI ". "switchMode switchType ". $readingFnAttributes; @@ -213,6 +218,7 @@ EnOcean_Set($@) my $updateState = 1; my $name = $hash->{NAME}; my $st = AttrVal($name, "subType", ""); + my $manufID = AttrVal($name, "manufID", ""); my $model = AttrVal($name, "model", ""); my $ll2 = GetLogLevel($name, 2); my $sendCmd = "yes"; @@ -227,11 +233,16 @@ EnOcean_Set($@) # Battery Powered Actuator (EEP A5-20-01) # [Kieback&Peter MD15-FTL-xx] # See also http://www.oscat.de/community/index.php/topic,985.30.html + # Maintenance commands (runInit, liftSet, valveOpen, valveClosed) my %sets = ( "desired-temp" => "\\d+(\\.\\d)?", "actuator" => "\\d+", "unattended" => "", "initialize" => "", + "runInit" => "", + "liftSet" => "", + "valveOpen" => "", + "valveClosed" => "", ); my $re = $sets{$a[0]}; return "Unknown argument $cmd, choose one of ".join(" ", sort keys %sets) @@ -256,14 +267,14 @@ EnOcean_Set($@) } elsif($st eq "eltakoDimmer" && $model ne "FSG70") { # Dimmer my $sendDimCmd=0; - my $dimTime=AttrVal($name, "dimTime", 0); + my $dimTime=AttrVal($name, "dimTime", 1); my $onoff=1; my $subDef = AttrVal($name, "subDef", "$hash->{DEF}"); my $dimVal=$hash->{READINGS}{dimValue}{VAL}; if($cmd eq "teach") { my $data=sprintf("A502000000%s00", $subDef); - Log $ll2, "EnOcean: set $name $cmd DefID: $hash->{DEF} SenderID: $subDef"; + Log $ll2, "EnOcean: set $name $cmd"; # len:000a optlen:00 pakettype:1(radio) IOWrite($hash, "000A0001", $data); @@ -353,7 +364,7 @@ EnOcean_Set($@) my $shutCmd = 0x00; if($cmd eq "teach") { my $data=sprintf("A5FFF80D80%s00", $subDef); - Log $ll2, "EnOcean: set $name $cmd DefID: $hash->{DEF} SenderID: $subDef"; + Log $ll2, "EnOcean: set $name $cmd"; # len:000a optlen:00 pakettype:1(radio) IOWrite($hash, "000A0001", $data); @@ -393,6 +404,188 @@ EnOcean_Set($@) Log $ll2, "EnOcean: set $name $cmd"; } + } elsif ($st eq "phcGateway") { + # PHC Gateway (EEP A5-38-08) + my $data; + my $phcCmd = AttrVal($name, "phcCmd", ""); + my $phcCmdID; + my $setCmd = 0; + my $subDef = AttrVal($name, "subDef", "$hash->{DEF}"); + my $time = 0; + if ($phcCmd eq "swiching") { + # Switching + $phcCmdID = 1; + if($cmd eq "teach") { + $data = sprintf "A5%02X000000%s00", $phcCmdID, $subDef; + } elsif ($cmd eq "on" || $cmd eq "B0") { + $setCmd = 9; + if ($a[1]) { + return "Usage: $cmd [lock|unlock]" if (($a[1] ne "lock") && ($a[1] ne "unlock")); + $setCmd = $setCmd | 4 if ($a[1] eq "lock"); + shift(@a); + } + $updateState = 0; + $data = sprintf "A5%02X%04X%02X%s00", $phcCmdID, $time, $setCmd, $subDef; + } elsif ($cmd eq "off" || $cmd eq "BI") { + $setCmd = 8; + if ($a[1]) { + return "Usage: $cmd [lock|unlock]" if (($a[1] ne "lock") && ($a[1] ne "unlock")); + $setCmd = $setCmd | 4 if ($a[1] eq "lock"); + shift(@a); + } + $updateState = 0; + $data = sprintf "A5%02X%04X%02X%s00", $phcCmdID, $time, $setCmd, $subDef; + } else { + my $cmdList = "B0 BI off on teach"; + return SetExtensions ($hash, $cmdList, $name, @a); + $updateState = 0; + $data = sprintf "A5%02X%04X%02X%s00", $phcCmdID, $time, $setCmd, $subDef; + } + + } elsif ($phcCmd eq "dimming") { + # Dimming + $phcCmdID = 2; + my $dimVal = $hash->{READINGS}{dimValue}{VAL}; + my $rampTime = AttrVal($name, "rampTime", 1); + my $sendDimCmd = 0; + $setCmd = 9; + my $subDef = AttrVal($name, "subDef", "$hash->{DEF}"); + if ($cmd eq "teach") { + $data = sprintf "A5%02X000000%s00", $phcCmdID, $subDef; + + } elsif ($cmd eq "dim") { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" + if((@a < 2) or ($a[1] < 0) or ($a[1] > 100) or ($a[1] !~ m/^[+-]?\d+$/)); + # for eltako relative (0-100) (but not compliant to EEP because DB0.2 is 0) + # >> if manufID needed: set DB2.0 + $dimVal = $a[1]; + readingsSingleUpdate ($hash, "dimValueStored", $dimVal, 1); + shift(@a); + if (defined($a[1])) { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" if ($a[1] !~ m/^[+-]?\d+$/); + $rampTime = $a[1]; + shift(@a); + } + $sendDimCmd = 1; + + } elsif ($cmd eq "dimup") { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" + if((@a < 2) or ($a[1] < 0) or ($a[1] > 100) or ($a[1] !~ m/^[+-]?\d+$/)); + $dimVal += $a[1]; + readingsSingleUpdate ($hash, "dimValueStored", $dimVal, 1); + shift(@a); + if (defined($a[1])) { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" if ($a[1] !~ m/^[+-]?\d+$/); + $rampTime = $a[1]; + shift(@a); + } + $sendDimCmd = 1; + + } elsif ($cmd eq "dimdown") { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" + if((@a < 2) or ($a[1] < 0) or ($a[1] > 100) or ($a[1] !~ m/^[+-]?\d+$/)); + $dimVal -= $a[1]; + readingsSingleUpdate ($hash, "dimValueStored", $dimVal,1); + shift(@a); + if (defined($a[1])) { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" if ($a[1] !~ m/^[+-]?\d+$/); + $rampTime = $a[1]; + shift(@a); + } + $sendDimCmd = 1; + + } elsif ($cmd eq "on" || $cmd eq "B0") { + $rampTime = 1; + my $dimValueOn = AttrVal($name, "dimValueOn", 100); + if ($dimValueOn eq "stored") { + $dimVal = ReadingsVal($name, "dimValueStored", 100); + if ($dimVal < 1) { + $dimVal = 100; + readingsSingleUpdate ($hash, "dimValueStored", $dimVal, 1); + } + } elsif ($dimValueOn eq "last") { + $dimVal = ReadingsVal ($name, "dimValueLast", 100); + if ($dimVal < 1) { $dimVal = 100; } + } else { + if ($dimValueOn !~ m/^[+-]?\d+$/) { + $dimVal = 100; + } elsif ($dimValueOn > 100) { + $dimVal = 100; + } elsif ($dimValueOn < 1) { + $dimVal = 1; + } else { + $dimVal = $dimValueOn; + } + } + $sendDimCmd = 1; + + } elsif ($cmd eq "off" || $cmd eq "BI") { + $dimVal = 0; + $rampTime = 1; + $setCmd = 8; + $sendDimCmd = 1; + + } else { + my $cmdList = "dim:slider,0,1,100 B0 BI on off teach"; + return SetExtensions ($hash, $cmdList, $name, @a); + } + if($sendDimCmd) { + if (defined($a[1])) { + return "Usage: $cmd dim/% [rampTime/s lock|unlock]" if (($a[1] ne "lock") && ($a[1] ne "unlock")); + if ($manufID eq "OOD") { + # Eltako devices: block dimming value + if ($a[1] eq "lock") { $setCmd = $setCmd | 4; } + } else { + # Dimming value relative + $setCmd = $setCmd | 4; + } + shift(@a); + } else { + if ($manufID ne "OOD") { $setCmd = $setCmd | 4; } + } + $a[0] = "on"; + if ($dimVal > 100) { $dimVal=100; } + if ($dimVal <= 0) { $dimVal=0; $setCmd = 8; $a[0]="off"; } + if ($rampTime > 255) { $rampTime = 255; } + if ($rampTime < 0) { $rampTime = 0; } + $updateState = 0; + $data = sprintf "A502%02X%02X%02X%s00", $dimVal, $rampTime, $setCmd, $subDef; + } + + } elsif ($phcCmd eq "setpointShift") { + $phcCmdID = 3; + if($cmd eq "teach") { $data = sprintf "A5%02X000000%s00", $phcCmdID, $subDef; + } else { + + } + + } elsif ($phcCmd eq "setpointBasic") { + $phcCmdID = 4; + if($cmd eq "teach") { $data = sprintf "A5%02X000000%s00", $phcCmdID, $subDef; + } else { + + } + + } elsif ($phcCmd eq "controlVar") { + $phcCmdID = 5; + if($cmd eq "teach") { $data = printf "A5%02X000000%s00", $phcCmdID, $subDef; + } else { + + } + + } elsif ($phcCmd eq "fanStage") { + $phcCmdID = 6; + if($cmd eq "teach") { $data = sprintf "A5%02X000000%s00", $phcCmdID, $subDef; + } else { + + } + + } + # write phcGateway command + # len: 0x000A optlen: 0x00 pakettype: 0x01(radio) + IOWrite($hash, "000A0001", $data); + Log $ll2, "EnOcean: set $name $cmd"; + } else { # Rocker Switch, simulate a PTM200 switch module # separate first and second action @@ -597,7 +790,7 @@ EnOcean_Parse($$) } elsif($rorg eq "D5") { # 1BS Telegram # Single Input Contact (EEP D5-00-01) - # [Eltako FTK (untested), STM-250] + # [Eltako FTK, STM-250] push @event, "3:state:" . ($db_3 & 1 ? "closed" : "open"); push @event, "3:learnBtn:on" if (!($db_3 & 0x8)); @@ -628,7 +821,8 @@ EnOcean_Parse($$) select(undef, undef, undef, 0.5); EnOcean_MD15Cmd($hash, $name, 128); # 128 == 20 degree C } - + # subType, manufID storing corrected + CommandSave(undef, undef); } else { push @event, "3:teach-in:No EEP profile identifier and no Manufacturer ID"; } @@ -636,17 +830,18 @@ EnOcean_Parse($$) } elsif($st eq "MD15") { # Battery Powered Actuator (EEP A5-20-01) # [Kieback&Peter MD15-FTL-xx] - push @event, "3:state:$db_3 %"; + push @event, "3:state:$db_3"; push @event, "3:currentValue:$db_3"; push @event, "3:serviceOn:" . (($db_2 & 0x80) ? "yes" : "no"); push @event, "3:energyInput:" . (($db_2 & 0x40) ? "enabled":"disabled"); push @event, "3:energyStorage:". (($db_2 & 0x20) ? "charged":"empty"); - push @event, "3:battery:" . (($db_2 & 0x10) ? "ok" : "empty"); + push @event, "3:battery:" . (($db_2 & 0x10) ? "ok" : "low"); push @event, "3:cover:" . (($db_2 & 0x08) ? "open" : "closed"); push @event, "3:tempSensor:" . (($db_2 & 0x04) ? "failed" : "ok"); push @event, "3:window:" . (($db_2 & 0x02) ? "open" : "closed"); push @event, "3:actuatorStatus:".(($db_2 & 0x01) ? "obstructed" : "ok"); push @event, "3:measured-temp:". sprintf "%0.1f", ($db_1*40/255); + push @event, "3:selfCtl:" . (($db_0 & 0x04) ? "on" : "off"); EnOcean_MD15Cmd($hash, $name, $db_1); } elsif($model eq "PM101") { @@ -797,7 +992,7 @@ EnOcean_Parse($$) $humi = $db_3 >> 1; push @event, "3:humidity:$humi"; } - my $co2 = sprintf "%d", $db_2 * 2550 / 255; + my $co2 = sprintf "%d", $db_2 * 10; push @event, "3:CO2:$co2"; if ($db_0 & 2) { $temp = sprintf "%0.1f", $db_1 * 51 / 255 ; @@ -894,11 +1089,11 @@ EnOcean_Parse($$) # Eltako sensor my $voltage = sprintf "%0.1f", $db_3 * 6.58 / 255; my $energyStorage = "unknown"; - if ($db_3 le 0x58) { + if ($db_3 <= 0x58) { $energyStorage = "empty"; $battery = "low"; } - elsif ($db_3 le 0xDC) { + elsif ($db_3 <= 0xDC) { $energyStorage = "charged"; $battery = "ok"; } @@ -1024,7 +1219,7 @@ EnOcean_Parse($$) # $db_0_bit_1 ... $db_0_bit_0 is the Divisor where 0 = x/1, 1 = x/10, # 2 = x/100, 3 = x/1000 # my $meterReading = hex sprintf "%02x%02x%02x", $db_3, $db_2, $db_1; - my $dataType = $db_0 & 4; + my $dataType = ($db_0 & 4) >> 3; my $divisor = $db_0 & 3; if ($divisor == 3) { $divisor = 1000; @@ -1051,7 +1246,7 @@ EnOcean_Parse($$) } } elsif ($st eq "autoMeterReading.01") { # Automated meter reading (AMR), Electricity (EEP A5-12-01) - # [Eltako FSS12, FWZ12,DSZ14DRS, DSZ14WDRS] + # [Eltako FSS12, FWZ12, DSZ14DRS, DSZ14WDRS] # $db_0_bit_7 ... $db_0_bit_4 is the Tariff info # $db_0_bit_2 is the Data type where 0 = cumulative value kWh, # 1 = current value W @@ -1147,6 +1342,101 @@ EnOcean_Parse($$) push @event, "3:contact:$contact"; push @event, "3:state:$contact"; + } elsif ($st eq "phcGateway") { + # PHC Gateway (EEP A5-38-08) + # $db_3 is the command ID ($phcCmdID) + # Eltako devices not send teach-in telegrams + if(($db_0 & 8) == 0) { + # teach-in, identify and store command type in attr phcCmd + my $phcCmd = AttrVal($name, "phcCmd", undef); + if (!$phcCmd) { + $phcCmd = $EnO_phcCmd[$db_3]; + $attr{$name}{phcCmd} = $phcCmd; + } + } + if ($db_3 == 1) { + # Switching + # Eltako devices not send A5 telegrams + push @event, "3:executeTime:" . sprintf "%0.1f", (($db_2 << 8) | $db_1) / 10; + push @event, "3:lock:" . $db_0 & 4 ? "lock" : "unlock"; + push @event, "3:executeType" . $db_0 & 2 ? "delay" : "duration"; + push @event, "3:state:" . $db_0 & 1 ? "on" : "off"; + } elsif ($db_3 == 2) { + # Dimming + # $db_0_bit_2 is store final value, not used, because + # dimming value is always stored + push @event, "3:rampTime:$db_1"; + push @event, "3:state:" . ($db_0 & 0x01 ? "on" : "off"); + if ($db_0 & 4) { + # Relative Dimming Range + push @event, "3:dimValue:" . sprintf "%d", $db_2 * 100 / 255; + } else { + push @event, "3:dimValue:$db_2"; + } + push @event, "3:dimValueLast:$db_2" if ($db_2 > 0); + } elsif ($db_3 == 3) { + # Setpoint shift + # $db1 is setpoint shift where 0 = -12.7 K ... 255 = 12.8 K + my $setpointShift = sprintf "%0.1f", -12.7 + $db_1 / 10; + push @event, "3:setpointShift:$setpointShift"; + push @event, "3:state:$setpointShift"; + } elsif ($db_3 == 4) { + # Basic Setpoint + # $db1 is setpoint where 0 = 0 °C ... 255 = 51.2 °C + my $setpoint = sprintf "%0.1f", $db_1 / 5; + push @event, "3:setpoint:$setpoint"; + push @event, "3:state:$setpoint"; + } elsif ($db_3 == 5) { + # Control variable + # $db1 is control variable override where 0 = 0 % ... 255 = 100 % + push @event, "3:controlVar:" . sprintf "%d", $db_1 * 100 / 255; + my $controllerMode = ($db_0 & 0x60) >> 5; + if ($controllerMode == 0) { + push @event, "3:controllerMode:auto"; + push @event, "3:state:auto"; + } elsif ($controllerMode == 1){ + push @event, "3:controllerMode:heating"; + push @event, "3:state:heating"; + } elsif ($controllerMode == 2){ + push @event, "3:controllerMode:colling"; + push @event, "3:state:colling"; + } elsif ($controllerMode == 3){ + push @event, "3:controllerMode:off"; + push @event, "3:state:off"; + } + push @event, "3:controllerState:" . $db_0 & 0x10 ? "override" : "auto"; + push @event, "3:energyHoldOff:" . $db_0 & 4 ? "holdoff" : "normal"; + my $occupancy = $db_0 & 3; + if ($occupancy == 0) { + push @event, "3:presence:present"; + } elsif ($occupancy == 1){ + push @event, "3:presence:absent"; + } elsif ($occupancy == 2){ + push @event, "3:presence:standby"; + } + } elsif ($db_3 == 6) { + # Fan stage + # + if ($db_1 == 0) { + push @event, "3:fanStage:0"; + push @event, "3:state:0"; + } elsif ($db_1 == 1){ + push @event, "3:fanStage:1"; + push @event, "3:state:1"; + } elsif ($db_1 == 2){ + push @event, "3:fanStage:2"; + push @event, "3:state:2"; + } elsif ($db_1 == 3){ + push @event, "3:fanStage:3"; + push @event, "3:state:3"; + } elsif ($db_1 == 255){ + push @event, "3:fanStage:auto"; + push @event, "3:state:auto"; + } + } else { + push @event, "3:state:PHC Gateway Command ID $db_3 unknown."; + } + } elsif ($st eq "manufProfile") { # Manufacturer Specific Applications (EEP A5-3F-7F) if ($manufID eq "002") { @@ -1210,19 +1500,27 @@ EnOcean_MD15Cmd($$$) if($cmd) { my $msg; # Unattended my $arg1 = ReadingsVal($name, $cmd, 0); # Command-Argument - if($cmd eq "actuator") { - $msg = sprintf("%02X000000", $arg1); - +# $msg = sprintf("%02X000000", $arg1); + $msg = sprintf("%02X7F0008", $arg1); } elsif($cmd eq "desired-temp") { - $msg = sprintf("%02X%02X0400", $arg1*255/40, - AttrVal($name, "actualTemp", ($db_1*40/255)) * 255/40); - +# $msg = sprintf "%02X%02X0400", $arg1*255/40, AttrVal($name, "actualTemp", ($db_1*40/255)) * 255/40; +# $msg = sprintf "%02X%02X0408", $arg1*255/40, AttrVal($name, "actualTemp", (255 - $db_1)*40/255) *255/40; +# $msg = sprintf "%02X7F0408", $arg1*255/40; + $msg = sprintf "%02X%02X0408", $arg1*255/40, AttrVal($name, "actualTemp", 127); } elsif($cmd eq "initialize") { - $msg = sprintf("00006400"); - - } - +# $msg = sprintf("00006400"); + $msg = "00006408"; + # Maintenance commands + } elsif($cmd eq "runInit") { + $msg = "00008108"; + } elsif($cmd eq "liftSet") { + $msg = "00004108"; + } elsif($cmd eq "valveOpen") { + $msg = "00002108"; + } elsif($cmd eq "valveClosed") { + $msg = "00001108"; + } if($msg) { select(undef, undef, undef, 0.2); EnOcean_A5Cmd($hash, $msg, "00000000"); @@ -1288,11 +1586,11 @@ EnOcean_Undef($$) A5 teach-in procedure transfers no EEP profile identifier and no manufacturer ID. In this case Fhem does not recognize the device automatically. The proper device type must be set manually, use the attributes - subType and/or model. If the EEP - profile identifier and the manufacturer ID are sent the device is clearly - identifiable. FHEM automatically assigns these devices to the correct - profile. Some A5 devices must be paired bidirectional, see - Bidirectional A5 Teach-In.

+ subType, manufID and/or + model. If the EEP profile identifier and the manufacturer + ID are sent the device is clearly identifiable. FHEM automatically assigns + these devices to the correct profile. Some A5 devices must be paired + bidirectional, see Bidirectional A5 Teach-In.

Fhem supports many of most common EnOcean profiles and manufacturer-specific devices. Additional profiles and devices can be added if required.

@@ -1340,7 +1638,7 @@ EnOcean_Undef($$) set <name> pairForSec <t/s>

Set the EnOcean Transceiver module (TCM Modul) in the bidirectional pairing - mode. A device, which is then also put in this state is to also paired which + mode. A device, which is then also put in this state is to paired with Fhem bidirectional. Bidirectional pearing is only used for some EEP A5-xx-xx, e. g. EEP A5-20-01 (Battery Powered Actuator).
@@ -1455,7 +1753,15 @@ EnOcean_Undef($$)
  • desired-temp <value>
    Use the builtin PI regulator, and set the desired temperature to the specified degree. The actual value will be taken from the temperature - reported by the MD15 or from the attribute actualTemp if it is set
    • + reported by the MD15 or from the attribute actualTemp if it is set. +
  • runInit
    + Maintenance Mode (service on): Run init sequence.
    • +
  • liftSet
    + Maintenance Mode (service on): Lift set
    • +
  • valveOpen
    + Maintenance Mode (service on): Valve open
    • +
  • valveClosed
    + DMaintenance Mode (service on): Valve closed
  • unattended
    Do not regulate the actuator.

    • @@ -1466,7 +1772,57 @@ EnOcean_Undef($$) every 10 minutes.

    - + +
  • PHC Gateway (EEP A5-38-08)
    + Switching
    + [Eltako FLC61, FSR14]
    +
    + The attr subType must be phcGateway and phcCmd must be switching. This is done if the device was + created by autocreate.
    + For Eltako devices attributes must be set manually. +
    • +

    + +
  • PHC Gateway (EEP A5-38-08)
    + Dimming
    + [Eltako FUD14, FUD61, FUD70, FSG14, ...]
    +
    + rampTime Range: t = 1 s ... 255 s or 0 if no time specified, + for Eltako: t = 1 = fast dimming ... 255 = slow dimming or 0 = dimming speed on the dimmer used)
    + The attr subType must be phcGateway and phcCmd must be dimming. This is done if the device was + created by autocreate.
    + For Eltako devices attributes must be set manually. Use the sensor type "PC/FVS" for Eltako devices. +
    • +

    +
  • Shutter (EEP F6-02-01 ... F6-02-02 and A5-3F-7F)
    [Eltako FSB12, FSB14, FSB61, FSB70, tested with Eltako devices only]

    The status of the device may become "released", this is not the case for a normal switch.
    @@ -1641,7 +2007,7 @@ EnOcean_Undef($$)
  • Single Input Contact, Door/Window Contact (EEP D5-00-01, 1BS Telegram)
    - [Eltako FTK, STM-250] + [Eltako FTK, Peha D 450 FU, STM-250, BSC ?]
    Set attr subType to eltakoShutter and attr model to FSB14|FSB61|FSB70 manually. @@ -1714,16 +2080,17 @@ EnOcean_Undef($$) [Kieback&Peter MD15-FTL-xx]

    The attr subType must be MD15. This is done if the device was created by @@ -1838,7 +2205,7 @@ EnOcean_Undef($$)

  • Light Sensor (EEP A5-06-01)
    - [Eltako FAH60, FAH63, FIH63, Thermokon SR65 LI, untested]
    + [Eltako FAH60, FAH63, FIH63, Thermokon SR65 LI]

    Eltako devices only support Brightness.
    The attr subType must be lightSensor.01 and attr manufID must be 00D - for Eltako Devices. This is done if the device was created byr + for Eltako Devices. This is done if the device was created by autocreate.


    • @@ -1879,7 +2246,7 @@ EnOcean_Undef($$)

  • Light, Temperatur and Occupancy Sensor (EEP A5-08-01 ... A5-08-03)
    - [Eltako FABH63, FBH55, FBH63, FIBH6, Thermokon SR-MDS, untested]
    + [Eltako FABH63, FBH55, FBH63, FIBH63, Thermokon SR-MDS]