###########################################
# $Id$
#
# Comments start with #. Empty lines are ignored.
# Syntax of one entry: name: line, one optional filter: line, zero or more par: lines,  FHEM-Commands
# filter:INTERNAL=VALUE (optional)
# par: name of the parameter; comment; perl_code (optional)
# perl_code returns a value for the parameter, or undef.
# If undef, the user has to specify them (the comment is shown to the user)

###########################################
name:0_00_General_Info
filter:TYPE=MQTT2_DEVICE
desc: <a href="https://forum.fhem.de/index.php/topic,94495.0.html">Forum Thread</a> for <br>- suggesting new templates <br>- bug reports on mqtt2.template

###############
#MQTT2_CLIENT_Bridge
#
name:A_00_MQTT2_CLIENT_general_bridge
filter:TYPE=MQTT2_DEVICE
desc:recommended to use this as general bridgeing device when using MQTT2_CLIENT as IO to get around missing CID info for distinguishing different popular devices<br>NOTE: <br>NOTE:<br>- for use with MQTT2_CLIENT use a copy of the device and change its DEF to a different clientId like GeneralBridge, delete original's readingList after applying the template! 
par:IODEVNAME;Name of the IO-Device; {AttrVal("DEVICE","IODev","") ? AttrVal("DEVICE","IODev","" ) : undef } 
par:DEVTYPE;TYPE of the device; { InternalVal("DEVICE","TYPE","")}
par:DEVCID;CID of the device as written in the DEF; { InternalVal(AttrVal("DEVICE","IODev",""),"clientId","mosquitto") eq InternalVal("DEVICE","DEF","mosquitto") ? "MQTT2_GeneralBridge" : InternalVal("DEVICE","DEF","mosquitto")}
par:IODEVROOM;Room of the IOdevice; {AttrVal(AttrVal("DEVICE","IODev",""),"room","" ) ? AttrVal(AttrVal("DEVICE","IODev",""),"room","" ) : undef } 
attr DEVICE bridgeRegexp   (tele|cmnd)[/]([^/]+)[/].*:.* "$2"\
  shellies[/]([^/]+)[/].*:.* "$1"\
  (ESPClient_[^/]+)[/].*:.* "$1"
attr DEVICE autocreate 1
attr DEVICE comment Do not use very open bridgeRegexp expressions! This might lead to irritating results...
attr DEVICE room IODEVROOM
attr DEVICE setStateList on off
#modify DEVICE DEVCID
#copy DEVICE DEVCID
deleteAttr DEVICE readingList
#deleteAttr DEVCID readingList
#delete DEVICE
#reload 10_DEVTYPE.pm
#attr DEVCID model A_00_MQTT2_CLIENT_general_bridge
attr DEVICE model A_00_MQTT2_CLIENT_general_bridge

###########################################
# zigbee2mqtt
# The zigbee2mqtt bridge device (entire hex id of devices as bridgeRegexp)
name:L_01_zigbee2mqtt_bridge
desc:The zigbee2mqtt bridge device
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^:]+:([^/]+)[/].*:, ? $1 : undef }
attr DEVICE bridgeRegexp\
 BASE_TOPIC/([A-Za-z0-9]*)[/]?.*:.* "zigbee_$1"
attr DEVICE getList\
  devicelist:noArg log BASE_TOPIC/bridge/config/devices\
  networkmap_raw:noArg raw BASE_TOPIC/bridge/networkmap raw\
  networkmap_graphviz:noArg graphviz BASE_TOPIC/bridge/networkmap graphviz
attr DEVICE readingList\
  BASE_TOPIC/bridge/state:.* state\
  BASE_TOPIC/bridge/config/devices:.* {}\
  BASE_TOPIC/bridge/config/log_level:.* log_level\
  BASE_TOPIC/bridge/config/permit_join:.* permit_join\
  BASE_TOPIC/bridge/config/rename:.* { json2nameValue($EVENT, 'rename_') }\
  BASE_TOPIC/bridge/log:.*\"type\".\"devices\".\"message\".* devices\
  BASE_TOPIC/bridge/log:.* log\
  BASE_TOPIC/bridge/networkmap:.* {}\
  BASE_TOPIC/bridge/networkmap/graphviz:.* graphviz\
  BASE_TOPIC/bridge/networkmap/raw:.* raw\
  BASE_TOPIC/bridge/config:.* { json2nameValue($EVENT) }
attr DEVICE setList\
  log_level:debug,info,warn,error BASE_TOPIC/bridge/config/log_level $EVTPART1\
  permit_join:true,false BASE_TOPIC/bridge/config/permit_join $EVTPART1\
  remove:textField BASE_TOPIC/bridge/config/remove $EVTPART1\
  rename:textField BASE_TOPIC/bridge/config/rename  {"old":"$EVTPART1","new":"$EVTPART2"}\
  x_add_to_group:textField zigbee2mqtt/bridge/group/$EVTPART1/add $EVTPART2\
  x_rm_from_group:textField zigbee2mqtt/bridge/group/$EVTPART1/remove $EVTPART2\
  x_rm_from_all_groups:textField zigbee2mqtt/bridge/group/$EVTPART1/remove_all $EVTPART2
attr DEVICE setStateList on off
attr DEVICE model L_01_zigbee2mqtt_bridge
# Based on https://forum.fhem.de/index.php/topic,94060.msg872371.html#msg872371 

name:L_01a_zigbee2mqtt_bridge_0x
desc:The zigbee2mqtt bridge device <br>Outdated version, using entire device name including "0x". <br>Kept in repo for compability reasons. 
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^:]+:([^/]+)[/].*:, ? $1 : undef }
set DEVICE attrTemplate L_01_zigbee2mqtt_bridge_0x
attr DEVICE bridgeRegexp BASE_TOPIC/(0x[A-Za-z0-9]*)[/]?.*:.* "zigbee_$1"
attr DEVICE model L_01a_zigbee2mqtt_bridge_0x
  
# The zigbee2mqtt bridge device
name:L_01x_zigbee2mqtt_bridge_outdated
desc:The zigbee2mqtt bridge device <br>Original version, kept in repo for compability reasons. <br>Truncs device name from "0x"
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
set DEVICE attrTemplate L_01_zigbee2mqtt_bridge
attr DEVICE bridgeRegexp BASE_TOPIC/0x([A-Za-z0-9]*)[/]?.*:.* "zigbee_$1"
attr DEVICE model L_01x_zigbee2mqtt_bridge_outdated

# A dimmable light connected via zigbee2mqtt
name:L_02a_zigbee2mqtt_light_dimmer
desc: A dimmable light connected via zigbee2mqtt <br>Tested with: Tradfri LED1650R5, Osram Lightify W32
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon light_control
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}
attr DEVICE setStateList on off
attr DEVICE model L_02a_zigbee2mqtt_light_dimmer

# A dimmable color light connected via zigbee2mqtt
name:L_02b_zigbee2mqtt_light_cct
filter:TYPE=MQTT2_DEVICE
desc: A dimmable light with color temperature via zigbee2mqtt
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon light_control
attr DEVICE webCmd toggle:on:off:brightness:color_temp
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}
attr DEVICE model L_02b_zigbee2mqtt_light_cct

#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:L_02c_zigbee2mqtt_light_rgb_hex
filter:TYPE=MQTT2_DEVICE
desc: A dimmable rgb light connected via zigbee2mqtt <br>rgb value is encoded as HEX value<br>Experimental, still untested
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:hex
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE userReadings hex:color_y.* {Color::xyY2hex(ReadingsVal($name,"color_x",0),ReadingsVal($name,"color_y",0),ReadingsVal($name,"brightness",254))}
attr DEVICE model L_02c_zigbee2mqtt_light_rgb_hex

name:L_02c_zigbee2mqtt_light_rgb_rgb
filter:TYPE=MQTT2_DEVICE
desc: A dimmable rgb light connected via zigbee2mqtt <br>rgb values will be sent as individual values r,g and b<br>Experimental, still untested
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model L_02c_zigbee2mqtt_light_rgb_rgb

#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:L_02d_zigbee2mqtt_light_rgbw_hex
filter:TYPE=MQTT2_DEVICE
desc: A dimmable rgbw light connected via zigbee2mqtt <br>rgb value is encoded as HEX value<br>Experimental, still untested
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:hex:white
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  white:noArg BASE_TOPIC/DEV_ID/set {"color_temp": 154 , "color_temp": 500}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE model L_02d_zigbee2mqtt_light_rgbw_hex

#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:L_02d_zigbee2mqtt_light_rgbw_rgb
filter:TYPE=MQTT2_DEVICE
desc: A dimmable rgbw light connected via zigbee2mqtt <br>rgb values will be sent as individual values r,g and b<br>Experimental, still untested
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color:white
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  white:noArg BASE_TOPIC/DEV_ID/set {"color_temp": 154 , "color_temp": 500}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model L_02d_zigbee2mqtt_light_rgbw_rgb

#source post: https://forum.fhem.de/index.php/topic,96985.msg902627.html#msg902627
name:L_02e_zigbee2mqtt_light_rgbcct_hex
desc: A dimmable rgb light connected via zigbee2mqtt <br>rgb value is encoded as HEX value<br>Experimental, still untested
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color_temp:hex
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
  hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE model L_02e_zigbee2mqtt_light_rgbcct_hex

#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:L_02e_zigbee2mqtt_light_rgbcct_rgb
filter:TYPE=MQTT2_DEVICE
desc: A dimmable rgb-cct light connected via zigbee2mqtt <br>rgb values will be sent as individual values r,g and b<br>Tested with: RGB-CCT GL-C-008
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal("$name","state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color_temp:color
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
  off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
  brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
  color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
  color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model L_02e_zigbee2mqtt_light_rgbcct_rgb

name:L_03_zigbee2mqtt_smokeDetector
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE icon secur_smoke_detector
attr DEVICE stateFormat smoke
attr DEVICE model L_03_zigbee2mqtt_smokeDetector

name:L_04_zigbee2mqtt_hueMotionSensor
filter:TYPE=MQTT2_DEVICE
attr DEVICE stateFormat T: temperature_weather B: illuminance L: linkquality
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE userReadings temperature_weather { sprintf("%.1f",ReadingsVal($name,"temperature","")+2.5) }
attr DEVICE model L_04_zigbee2mqtt_hueMotionSensor

name:L_05_zigbee2mqtt_smart+plug
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE eventMap { dev=>{ON=>'on',OFF=>'off'} }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  off BASE_TOPIC/DEV_ID/set OFF\
  on BASE_TOPIC/DEV_ID/set ON
attr DEVICE model L_05_zigbee2mqtt_smart+plug

name:L_06_zigbee2mqtt_ContactSensor
desc: Contact sensor via zigbee2mqtt <br>Tested with: Xiaomi models Aqara and Mijia
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat contact
attr DEVICE devStateIcon open:fts_window_1w_open@red close:fts_window_1w@green
#attr DEVICE genericDeviceType contact
attr DEVICE eventMap true:close false:open
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_06_zigbee2mqtt_ContactSensor

name:L_07_zigbee2mqtt_TempHumHpaSensor
desc: Temp/hum/hpa sensor via zigbee2mqtt <br>Tested with: Xiaomi Aqara WSDCGQ11LM Temperature Humidity Sensor
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat {sprintf ("Temperature: %.1f°C Humidity: %.1f%% Pressure: %.1fhpa", ReadingsVal($name,"temperature",0), ReadingsVal($name,"humidity",0), ReadingsVal($name,"pressure",0)) }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_07_TempHumHpa_TempSensor

#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:L_08_zigbee2mqtt_Human_Motion_Sensor
desc: Temp/hum/hpa sensor via zigbee2mqtt <br>Tested with: Xiaomi Aqara RTCGQ11LM Human Motion Sensor
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Motion: occupancy Luminance: illuminance
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_08_Human_Motion_TempSensor

#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:L_09_zigbee2mqtt_Motion_Sensor
desc: Temp/hum/hpa sensor via zigbee2mqtt <br>Tested with: Xiaomi Aqara DJT11LM Smart Motion Sensor
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Motion: action X: angle_x Y: angle_y Z: angle_z
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_09_Motion_Sensor

#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:L_10_zigbee2mqtt_Water_Leak_Sensor
desc: Temp/hum/hpa sensor via zigbee2mqtt <br>Tested with: Xiaomi Aqara SJCGQ11LM Water Leak Sensor
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/](.*):, ? $1 : undef }
attr DEVICE stateFormat Leak: water_leak
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_10_Water_Leak_Sensor

#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:L_11_zigbee2mqtt_Light_Switch
desc: Temp/hum/hpa sensor via zigbee2mqtt <br>Tested with: Xiaomi Aqara WXKG02LM 2btn Smart Light Switch
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat click
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_11_Light_Switch

#source post: https://forum.fhem.de/index.php/topic,94495.msg916789.html#msg916789
name:L_12_zigbee2mqtt_Wireless_Button
desc: Wireless button via zigbee2mqtt <br>Tested with: Xiaomi Aqara WXKG12LM wireless switch with gyroscope
filter:TYPE=MQTT2_DEVICE
par:BASE_TOPIC;base topic as set in configuration.yaml of the zigbee2mqtt bridge in the topics;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Click: click Action: action
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE model L_12_Wireless_Button

###########################################
# TASMOTA
# The regexp must handle
# - tele/sonoff/LWT: => cmnd/sonoff/
# - DVES_XXXXXX:/SmartHome/Esszimmer/Stehlampe/tele/LWT: => /SmartHome/Esszimmer/Stehlampe/cmnd/
name:A_01a_tasmota_basic_state_power1
filter:TYPE=MQTT2_DEVICE
desc:Applies to Sonoff Basic, S20 using POWER1-topic for relay state <br>NOTE: The format the device is sending data will also be changed to lowercase!<br>NOTE: This template is intended to configure also channel one of multi-channel tasmota devices
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE stateFormat POWER1
#attr DEVICE userReadings state:POWER1:.* { lc(ReadingsVal($name,"POWER1","")) }
#attr DEVICE eventMap { dev=>{'^(.*)POWER(.?): OFF$'=>'$1POWER$2: off', '^(.*)POWER(.?): ON$'=>'$1POWER$2: on'} }
set DEVICE attrTemplate A_01z_tasmota_set_lowercase_texts_and_state1
attr DEVICE setList \
  off:noArg    cmnd/DEVNAME/POWER1 0\
  on:noArg     cmnd/DEVNAME/POWER1 1\
  toggle:noArg cmnd/DEVNAME/POWER1 2
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/SENSOR:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE setStateList on off toggle
attr DEVICE autocreate 0
attr DEVICE model A_01a_tasmota_basic_state_power1

# sonoff 1 channel device flashed with Tasmota.
name:A_01_tasmota_basic
filter:TYPE=MQTT2_DEVICE
desc:Applies to Sonoff 1 Channel devices using POWER-topic for relay state <br>NOTE:<br>- Power topic will be set to POWER1; <br>- the format the device is sending data will also be changed to lowercase!<br>- finally, you'll see the device as model A_01a_tasmota_basic_state_power1.
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1

name:A_01x_tasmota_clear_readings_reset_readingsList_and_reboot
filter:TYPE=MQTT2_DEVICE
desc: replaces the readingList with defaults, clears the readingList and reboots to get all readings
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev","")}
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/SENSOR:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/UPTIME:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
set IO_DEV publish cmnd/DEVNAME/Restart 1
attr DEVICE autocreate 0

name:A_01x_tasmota_prefix_clearing_and_reboot
filter:TYPE=MQTT2_DEVICE
desc:Applies to all tasmota devices <br>NOTE: This template will delete some readings and clear the readingList from prefix use when expanding json. <br>When applying the template the tasmota device is rebooted to get all readings
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev","")}
par:READINGLISTCLEARED;cleared from prefixes;{ AttrVal("DEVICE","readingList","") =~ s/, '[^_]+[_]'/, ''/g, ? $1 : undef }
attr DEVICE readingList READINGLISTCLEARED
deletereading DEVICE .*
set IO_DEV publish cmnd/DEVNAME/Restart 1
attr DEVICE autocreate 0

# tasmota device with one relay, one motion sensor via switch
name:A_01b_tasmota_1ch+motion+SI7021
desc:tasmota device with one relay, one motion sensor via switch and one SI7021 combined temperature and humidity sensor. <br>Configures a single device including all readings
filter:TYPE=MQTT2_DEVICE
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE setList \
  off:noArg    cmnd/DEVNAME/POWER1 0\
  on:noArg     cmnd/DEVNAME/POWER1 1\
  toggle:noArg cmnd/DEVNAME/POWER1 2
attr DEVICE stateFormat {\
  ReadingsVal($name, "POWER1", "off") . " "\
  ReadingsVal($name, "POWER2", "off") . " "\
  . sprintf("%.1f°C ",ReadingsVal($name,"SI7021_Temperature",0))\
  . sprintf("%.0f%%",ReadingsVal($name,"SI7021_Humidity",0))\
  }
attr DEVICE devStateIcon {\
  my $state = lc ReadingsVal($name, "POWER2", "off");\
  my $devStateIcon = 'building_security@green';\
  if ($state eq "on") {\
    $devStateIcon = 'building_security@red';\
  }\
  "<div>" . FW_makeImage(lc ReadingsVal($name, "POWER1", "off"))\
    . FW_makeImage($devStateIcon) . sprintf(\
    "&nbsp;&nbsp;[Temp: %.1f°C / Feucht: %.0f%%]",\
    ReadingsVal($name,"SI7021_Temperature",0),\
    ReadingsVal($name,"SI7021_Humidity",0)\
    ) . "</div>"\
  }
attr DEVICE model A_01b_tasmota_1ch+motion+SI7021

name:A_01c_tasmota_POW
filter:TYPE=MQTT2_DEVICE
desc:Applies to Sonoff POW devices<br>NOTE: Power topic will be set to POWER1; the format the device is sending data will also be changed to lowercase!
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
attr DEVICE stateFormat {sprintf("aktuell: %.1f W Tag: %.2f kWh Gestern: %.3f kWh Gesamt: %.4f kWh", ReadingsVal($name,"ENERGY_Power",undef), ReadingsVal($name,"ENERGY_Today",undef), ReadingsVal($name,"ENERGY_Yesterday",undef), ReadingsVal($name,"ENERGY_Total",undef))}
attr DEVICE model A_01c_tasmota_POW

# tasmota 2ch as one FHEM device.
name:A_02a_tasmota_2ch_unified
filter:TYPE=MQTT2_DEVICE
desc:Configures a single device including all readings
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE setList \
  POWER1:on,off,toggle cmnd/DEVNAME/POWER1 $EVTPART1\
  POWER2:on,off,toggle cmnd/DEVNAME/POWER2 $EVTPART1
attr DEVICE webCmd POWER1 on:POWER1 off:POWER2 on:POWER2 off
attr DEVICE devStateIcon Online:10px-kreis-gruen@green Offline:10px-kreis-rot@red 1.on:on:POWER1+off 1.off:off:POWER1+on 2.on:on:POWER2+off 2.off:off:POWER2+on
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/SENSOR:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/UPTIME:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/POWER1:.* POWER1\
  stat/DEVNAME/POWER2:.* POWER2
attr DEVICE stateFormat LWT\
1:POWER1\
2:POWER2\
<br>\
<a href="http://IPAddress" target="_blank">IPAddress</a>
attr DEVICE webCmd POWER1:POWER2
attr DEVICE model A_02a_tasmota_2ch_unified

# sonoff 2 channel device flashed with Tasmota.
name:A_02_tasmota_2channel_split
filter:TYPE=MQTT2_DEVICE
desc:sonoff 2 channel device flashed with Tasmota. <br>NOTE: a second device will be created for the second channel
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
#par:COMMAND;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\btele(/.*)?/LWT:, ? "${1}cmnd$2" : undef }
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 stateFormat POWER2
#attr DEVICE_CH2 userReadings state:POWER2:.* { lc(ReadingsVal($name,"POWER2","")) }
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE
attr DEVICE_CH2 setList \
  off:noArg    cmnd/DEVNAME/POWER2 0\
  on:noArg     cmnd/DEVNAME/POWER2 1\
  toggle:noArg cmnd/DEVNAME/POWER2 2
attr DEVICE_CH2 setStateList on off toggle
attr DEVICE model A_02_tasmota_2channel_split
attr DEVICE_CH2 model A_02_tasmota_2channel_split

# tasmota 4ch as one FHEM device.
name:A_04b_tasmota_4ch_unified_icon
filter:TYPE=MQTT2_DEVICE
desc:Configures a single device including all readings <br>NOTE: Clicking on icons will issue a corresponding toggle command
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE setList \
  POWER1:on,off,toggle cmnd/DEVNAME/POWER1 $EVTPART1\
  POWER2:on,off,toggle cmnd/DEVNAME/POWER2 $EVTPART1\
  POWER3:on,off,toggle cmnd/DEVNAME/POWER3 $EVTPART1\
  POWER4:on,off,toggle cmnd/DEVNAME/POWER4 $EVTPART1
attr DEVICE devStateIcon Online:10px-kreis-gruen@green Offline:10px-kreis-rot@red 1.on:on:POWER1+off 1.off:off:POWER1+on 2.on:on:POWER2+off 2.off:off:POWER2+on 3.on:on:POWER3+off 3.off:off:POWER3+on 4.on:on:POWER4+off 4.off:off:POWER4+on
#attr DEVICE userReadings state:POWER.*:.* { lc(ReadingsVal($name,"POWER1","") . " " . ReadingsVal($name,"POWER2","") . " " . ReadingsVal($name,"POWER3","") . " " . ReadingsVal($name,"POWER4","")) }
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/SENSOR:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/UPTIME:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/POWER1:.* POWER1\
  stat/DEVNAME/POWER2:.* POWER2\
  stat/DEVNAME/POWER3:.* POWER3\
  stat/DEVNAME/POWER4:.* POWER4
attr DEVICE stateFormat LWT\
1:POWER1\
2:POWER2\
3:POWER3\
4:POWER4\
<br>\
<a href="http://IPAddress" target="_blank">IPAddress</a>
attr DEVICE webCmd POWER1:POWER2:POWER3:POWER4
attr DEVICE model A_04b_tasmota_4ch_unified_icon

# tasmota 4ch as one FHEM device.
name:A_04a_tasmota_4ch_unified_basic_text
desc:Configures a single device
filter:TYPE=MQTT2_DEVICE
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
#attr DEVICE userReadings state:POWER.*:.* { lc(ReadingsVal($name,"POWER1","") . " " . ReadingsVal($name,"POWER2","") . " " . ReadingsVal($name,"POWER3","") . " " . ReadingsVal($name,"POWER4","")) }
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/SENSOR:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }
attr DEVICE setList \
  POWER1:on,off,toggle cmnd/DEVNAME/POWER1 $EVTPART1\
  POWER2:on,off,toggle cmnd/DEVNAME/POWER2 $EVTPART1\
  POWER3:on,off,toggle cmnd/DEVNAME/POWER3 $EVTPART1\
  POWER4:on,off,toggle cmnd/DEVNAME/POWER4 $EVTPART1
attr DEVICE setStateList on off toggle
attr DEVICE stateFormat P1: POWER1 P2: POWER2 P3: POWER3 P4: POWER4
attr DEVICE webCmd POWER1 toggle:POWER2 toggle:POWER3 toggle:POWER4 toggle
attr DEVICE model A_04a_tasmota_4ch_unified_basic_text

#source post: https://forum.fhem.de/index.php/topic,94495.msg899041.html#msg899041
name:A_05a_tasmota_rgb_led_controller
filter:TYPE=MQTT2_DEVICE
desc:Tasmota RGB controller tested with RGB variant of Magichome, arilux LC-01 ,etc... -> https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller
set DEVICE attrTemplate A_01a_tasmota_basic_state_power1
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
attr DEVICE setList\
  off:noArg cmnd/DEVNAME/POWER1 0\
  on:noArg cmnd/DEVNAME/POWER1 1\
  toggle:noArg cmnd/DEVNAME/POWER1 2\
  Color:colorpicker,RGB cmnd/DEVNAME/COLOR
attr DEVICE readingList \
  tele/DEVNAME/LWT:.* LWT\
  stat/DEVNAME/POWER:.* POWER\
  tele/DEVNAME/STATE:.* { json2nameValue($EVENT) }\
  stat/DEVNAME/RESULT:.* { json2nameValue($EVENT) }\
  tele/DEVNAME/INFO.:.* { json2nameValue($EVENT) }
deletereading DEVICE .*
attr DEVICE autocreate 0
attr DEVICE devStateIcon {Color::devStateIcon($name,"rgb","Color","state")}
attr DEVICE icon light_control
attr DEVICE stateFormat POWER1
attr DEVICE webCmd Color:Color ff0000:Color 00ff00:Color 0000ff:toggle:on:off
attr DEVICE model A_05a_tasmota_rgb_led_controller

name:A_01z_tasmota_set_lowercase_texts_and_state1
filter:TYPE=MQTT2_DEVICE
desc:Applies to all tasmota devices <br>NOTE: This template will change ON, OFF etc. sent from tasmota side to lowercase. <br>After applying the template you might consider to delete or change stateFormat, eventMap and/or userReadings attribute values
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev","")}
set IO_DEV publish cmnd/DEVNAME/Backlog StateText1 off; StateText2 on; StateText3 toggle; StateText4 hold; SetOption26 1; SaveData 1

name:A_01z_tasmota_set_uppercase_texts_and_state1
filter:TYPE=MQTT2_DEVICE
desc:Applies to all tasmota devices <br>NOTE: This template will change on, off etc. sent from tasmota side to uppercase. NOTE: this  template only exists for compability reasons to older MQTT implementations; not recommended for other user groups
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev","")}
set IO_DEV publish cmnd/DEVNAME/Backlog StateText1 OFF; StateText2 ON; StateText3 TOGGLE; StateText4 HOLD; SetOption26 1
attr DEVICE userReadings state:POWER1:.* { lc(ReadingsVal($name,"POWER1","")) }

name:A_01z_tasmota_set_power1_state_to_power
filter:TYPE=MQTT2_DEVICE
desc:Applies to single relay tasmota devices <br>NOTE: this  template only exists for compability reasons to other HA solutions; not recommended for usage in FHEM context
par:DEVNAME;ESP's name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,tele/([^/]*)/, ? $1 : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev","")}
set IO_DEV publish cmnd/DEVNAME/SetOption26 0
attr DEVICE userReadings state:POWER:.* { lc(ReadingsVal($name,"POWER","")) }

#name:A_01z_tasmota_test_IPAdress_to_http
#filter:TYPE=MQTT2_DEVICE
#desc:Applies to single relay tasmota devices <br>NOTE: this  template changes existing eventMap attribute
#attr DEVICE eventMap { dev=>{'^IPAddress.?: (\d+)\.(\d+)\.(\d+)\.(\d+)$'=>'<html><a href=http://$1.$2.$3.$4/>IPAddress</a></html>', } }


###########################################
# SHELLY
#
# shelly1 using original firmware.
name:A_10_shelly1
filter:TYPE=MQTT2_DEVICE
par:DEVNAME;Shelly1 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE setList\
  off:noArg shellies/DEVNAME/relay/0/command off\
  on:noArg shellies/DEVNAME/relay/0/command on
attr DEVICE readingList \
  shellies/DEVNAME/relay/0:.* state\
  shellies/DEVNAME/relay/0:.* relay0\
  shellies/DEVNAME/input/0:.* input0\
  shellies/DEVNAME/online:.* online\
  shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }
deleteReading DEVICE .*
attr DEVICE model A_10_shelly1

# shellyplug using original firmware.
name:A_10a_shellyplug
filter:TYPE=MQTT2_DEVICE
par:DEVNAME;ShellyPlug name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate A_10_shelly1
attr DEVICE getList power:noArg shellies/DEVNAME/relay/power power
attr DEVICE model A_10a_shellyplug

# shelly2 using original firmware in roller mode.
name:A_11b_shelly2_roller
filter:TYPE=MQTT2_DEVICE
desc:shelly2 using original firmware. <br>NOTE: shelly2 roller operated, change settings first!
par:DEVNAME;Shelly2 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment shelly2 roller operated
attr DEVICE setList \
  open:noArg shellies/DEVNAME/roller/0/command open\
  close:noArg shellies/DEVNAME/roller/0/command close\
  stop:noArg shellies/DEVNAME/roller/0/command stop\
  pct:slider,0,1,100 shellies/DEVNAME/roller/0/command/pos $EVTPART1\
  DoRecalibration:noArg shellies/DEVNAME/roller/0/command rc
attr DEVICE readingList \
  shellies/DEVNAME/roller/0/pos:.* pct\
  shellies/DEVNAME/status/0/rollers:.* power\
  shellies/DEVNAME/online:.* online\
  shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
  shellies/DEVNAME/roller/0:.* state\
  shellies/DEVNAME/input/1:.* input1\
  shellies/DEVNAME/input/0:.* input0
attr DEVICE devStateIcon 0:fts_shutter_100 100:fts_shutter_10 9\d.*:fts_shutter_10 8\d.*:fts_shutter_20 7\d.*:fts_shutter_30 6\d.*:fts_shutter_40 5\d.*:fts_shutter_50 4\d.*:fts_shutter_60 3\d.*:fts_shutter_70 2\d.*:fts_shutter_80 1\d.*:fts_shutter_90 0\d.*:fts_shutter_100 set_.*:fts_shutter_updown
attr DEVICE stateFormat pct
deleteReading DEVICE .*
attr DEVICE setStateList open close stop
attr DEVICE model A_11b_shelly2_roller

# shelly2 using original firmware.
# NOTE: a second device will be created for the second channel
name:A_11a_shelly2_split
filter:TYPE=MQTT2_DEVICE
desc:shelly2 using original firmware. <br>NOTE: a second device will be created for the second channel
set DEVICE attrTemplate A_10a_shellyplug
par:DEVNAME;Shelly2 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 readingList shellies/DEVNAME/relay/1:.* state
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE
attr DEVICE_CH2 setList \
  off:noArg shellies/DEVNAME/relay/1/command off\
  on:noArg shellies/DEVNAME/relay/1/command on
attr DEVICE model A_11a_shelly2_split

# shelly4pro using original firmware
name:A_14a_shelly4pro_split
filter:TYPE=MQTT2_DEVICE
desc:shelly4pro using original firmware <br>NOTE: for each of the second to fourth channel, a new device will be created
par:DEVNAME;Shelly4Pro name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate A_10a_shellyplug
attr DEVICE getList \
  power0:noArg shellies/DEVNAME/relay/0/power power0\
  energy0:noArg shellies/DEVNAME/relay/0/energy energy0
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 readingList shellies/DEVNAME/relay/1:.* state
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE,DEVICE_CH3,DEVICE_CH4
attr DEVICE_CH2 setList \
  off:noArg shellies/DEVNAME/relay/1/command off\
  on:noArg shellies/DEVNAME/relay/1/command on
attr DEVICE getList \
  power1:noArg shellies/DEVNAME/relay/1/power power1\
  energy1:noArg shellies/DEVNAME/relay/1/energy energy1
attr DEVICE comment Channel 2 for DEVICE, see also DEVICE, DEVICE_CH3 and DEVICE_CH4
copy DEVICE DEVICE_CH3
attr DEVICE_CH3 readingList shellies/DEVNAME/relay/2:.* state
attr DEVICE_CH3 comment Channel 3 for DEVICE
setreading DEVICE_CH3 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH4
attr DEVICE_CH3 setList \
  off:noArg shellies/DEVNAME/relay/2/command off\
  on:noArg shellies/DEVNAME/relay/2/command on
attr DEVICE getList \
  power2:noArg shellies/DEVNAME/relay/2/power power2\
  energy2:noArg shellies/DDEVNAME/relay/2/energy energy2
attr DEVICE comment Channel 3 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH4
copy DEVICE DEVICE_CH4
attr DEVICE_CH4 readingList shellies/DEVNAME/relay/3:.* state
attr DEVICE_CH4 comment Channel 4 for DEVICE
setreading DEVICE_CH4 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH3
attr DEVICE_CH4 setList \
  off:noArg shellies/DEVNAME/relay/3/command off\
  on:noArg shellies/DEVNAME/relay/3/command on
attr DEVICE_CH4 getList \
  power3:noArg shellies/DEVNAME/relay/3/power power3\
  energy3:noArg shellies/DEVNAME/relay/3/energy energy3
attr DEVICE_CH4 comment Channel 4 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH3
attr DEVICE model A_14a_shelly4pro_split

# shelly4pro unified device using original firmware
# source: https://forum.fhem.de/index.php/topic,97218.msg905689.html#msg905689
name:A_14b_shelly4pro_unified
filter:TYPE=MQTT2_DEVICE
desc:shelly4pro using original firmware <br>NOTE: UNTESTED! feedback is apreciated, please try also to add toggle commands <br>NOTE: only one device will be created.
par:DEVNAME;Shelly4Pro name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate A_10a_shellyplug
attr DEVICE getList \
  power0:noArg shellies/DEVNAME/relay/0/power power0\
  energy0:noArg shellies/DEVNAME/relay/0/energy energy0\
  power1:noArg shellies/DEVNAME/relay/1/power power1\
  energy1:noArg shellies/DEVNAME/relay/1/energy energy1\
  power2:noArg shellies/DEVNAME/relay/2/power power2\
  energy2:noArg shellies/DDEVNAME/relay/2/energy energy2\
  power3:noArg shellies/DEVNAME/relay/3/power power3\
  energy3:noArg shellies/DEVNAME/relay/3/energy energy3
attr DEVICE readingList \
  shellies/DEVNAME/relay/0:.* relay0\
  shellies/DEVNAME/input/0:.* input0\
  shellies/DEVNAME/relay/1:.* relay1\
  shellies/DEVNAME/input/1:.* input1\
  shellies/DEVNAME/relay/2:.* relay2\
  shellies/DEVNAME/input/2:.* input2\
  shellies/DEVNAME/relay/3:.* relay3\
  shellies/DEVNAME/input/3:.* input3\
  shellies/DEVNAME/online:.* online\
  shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
  shellies/DEVNAME/relay/0/power:.* power0\
  shellies/DEVNAME/relay/1/power:.* power1\
  shellies/DEVNAME/relay/2/power:.* power2\
  shellies/DEVNAME/relay/3/power:.* power3\
  shellies/DEVNAME/relay/0/energy:.* energy0\
  shellies/DEVNAME/relay/1/energy:.* energy1\
  shellies/DEVNAME/relay/2/energy:.* energy2\
  shellies/DEVNAME/relay/3/energy:.* energy3
attr DEVICE setList \
  relay0:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/0/command $EVTPART1\
  relay1:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/1/command $EVTPART1\
  relay2:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/2/command $EVTPART1\
  relay3:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/3/command $EVTPART1 
attr DEVICE webCmd relay0:relay1:relay2:relay3
attr DEVICE stateFormat R0: relay0 R1: relay1 R2: relay2 R3: relay3
attr DEVICE model A_14b_shelly4pro_unified

# shellybulb using original firmware
name:A_15_shellybulb
filter:TYPE=MQTT2_DEVICE
desc:shellybulb using original firmware <br>Tested with 1.3
par:DEVNAME;name of this shelly;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]+)/, ? $1 : undef }
attr DEVICE setList\
  off:noArg shellies/DEVNAME/color/0/command off\
  on:noArg shellies/DEVNAME/color/0/command on\
  brightness:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"ison":"true","mode":"white","$EVTPART0":"$EVTPART1"}\
  temp:colorpicker,CT,3000,10,6500 shellies/DEVNAME/color/0/set {"ison":"true","mode":"white","$EVTPART0":"$EVTPART1"}\
  rgb:colorpicker,RGB {$EVTPART1=~/(..)(..)(..)/; "shellies/DEVNAME/color/0/set {\"ison\":true,\"mode\":\"color\",\"red\":".hex($1).",\"green\":".hex($2)."\"blue\":".hex($3) }
deletereading DEVICE status_.*
attr DEVICE readingList shellies/DEVNAME/color/0/status:.* {json2nameValue($EVENT)}
attr DEVICE userReadings rgb {sprintf("%02X%02X%02X", ReadingsVal($name,"red",99), ReadingsVal($name,"green",99), ReadingsVal($name,"blue",99))}
attr DEVICE webCmd on:off:brightness:temp:rgb
attr DEVICE genericDeviceType light
attr DEVICE icon light_control
attr DEVICE model A_15_shellybulb

# shellyht using original firmware
name:A_16_shellyht
filter:TYPE=MQTT2_DEVICE
desc:shellyht using original firmware <br>Just adds stateFormat and icon
attr DEVICE icon temperature_humidity
attr DEVICE stateFormat T: temperature °C H: humidity % B: battery %
attr DEVICE model A_16_shellyht


###############
#ebusd
#
#ebus daemon device
name:E_01a_eBus_daemon_splitter
filter:TYPE=MQTT2_DEVICE
desc:Device containing all status messages from the ebus daemon itself<br>NOTE: acts also as a bridge device to split up the hardware on the bus into different mqtt2_devices<br>NOTE:<br>- for use with MQTT2_CLIENT use a copy of the Device with the same clientId than the IO, delete original's readingList after applying the template!<br>- this might change the devices CID
par:DEVTYPE;Internal TYPE of the device; { InternalVal("DEVICE","TYPE","")}
par:DEV_ID;base topic set ebus;{ AttrVal("DEVICE","readingList","") =~ m,[^:]+:?(ebus[a-zA-Z])[^/]*[/].*:, ? $1 : "ebusd" }
modify DEVICE DEV_ID
attr DEVICE autocreate 1
attr DEVICE bridgeRegexp   (ebus.)[^/]*/(bai|broadcast)/.*:.* "$1_bai"\
  (ebus.)[^/]*/([\d]+)/.*:.* "$1_$2"\
  (ebus.)[^/]*[/][^b][a-zA-Z]+[/].*:.* "$1"
#attr DEVICE icon icoTempHeizung
#attr DEVICE devStateStyle style="text-align:right"
attr DEVICE model E_01a_eBus_daemon_splitter


###############
#ESP Milight Hub
#use this with Chris Mullins ESP-Milight-Hub. for further details visit https://github.com/sidoh/esp8266_milight_hub
#recommended structure of the topic pattern milight/:device_id/:device_type/:group_id 
#as set in the settings section in the bridge's web interface 
#
#The ESP-Milight-Hub bridge device
#Atm there are no furter commands to be set to the esp itself
name:X_01_esp_milight_hub_bridge
filter:TYPE=MQTT2_DEVICE
desc:use this with Chris Mullins ESP-Milight-Hub. for further details visit https://github.com/sidoh/esp8266_milight_hub <br>#recommended structure of the topic pattern milight/:device_id/:device_type/:group_id as set in the settings section in the bridge's web interface.
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
attr DEVICE bridgeRegexp BASE_ID/states/(0x....)/.*/([0-4])?.*:.* "milight_$1_$2"
attr DEVICE autocreate 1
attr DEVICE setStateList on off
attr DEVICE model X_01_esp_milight_hub_bridge

#rgbw-bulb
name:X_01_esp_milight_hub_rgbw_bulb
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge <br>Basic elements to control a rgbw bulb. If you own a different type of bulb, this template could contain more options than your physical device might be able to handle. Just delete, what you don't need or use the full featured version to get extended options and then delete what you don't need...
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*tes/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd brightness:hue:command
attr DEVICE readingList \
  BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
  on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
  off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
  brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}
attr DEVICE setStateList on off
#attr DEVICE userReadings rgb {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
attr DEVICE model X_01_esp_milight_hub_rgbw_bulb

#rgbw-group
name:X_01a_esp_milight_hub_make_rgbw_group
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge <br>Defines a new device based on the one the template is applied to. <br>Only basic elements to control a group of rgbw bulbs will be available. 
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*tes/.*:, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
copy DEVICE milight_REMOTE_ID_0
deletereading milight_REMOTE_ID_0 .*_.*
attr milight_REMOTE_ID_0 icon light_control
attr milight_REMOTE_ID_0 eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/
attr milight_REMOTE_ID_0 devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr milight_REMOTE_ID_0 webCmd brightness:hue:command
attr milight_REMOTE_ID_0 readingList \
  BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr milight_REMOTE_ID_0 setList\
  on BASE_ID/REMOTE_ID/BULB_TYPE/0 {"status":"ON"}\
  off BASE_ID/REMOTE_ID/BULB_TYPE/0_ID {"status":"OFF"}\
  brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}\
  hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}\
  command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}
attr milight_REMOTE_ID_0 setStateList on off
#attr milight_REMOTE_ID_0 userReadings rgb {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
modify milight_REMOTE_ID_0 milight_REMOTE_ID_0
attr milight_REMOTE_ID_0 model X_01a_esp_milight_hub_make_rgbw_group

#rgbw_cct-bulb
name:X_01a_esp_milight_hub_rgb_cct_bulb
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge <br>NOTE: Development state is experimental! <br><a href="https://forum.fhem.de/index.php/topic,86932.msg877986.html#msg877986">Source: Forum</a>
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE readingList \
  BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
  on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
  off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
  brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  color_temp:colorpicker,CT,153,1,370 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  saturation:colorpicker,BRI,0,1,100 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
  mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
#attr DEVICE userReadings rgb {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
attr DEVICE webCmd brightness:dim:hue:command:color_temp:program:saturation:mode
attr DEVICE webCmdLabel   brightness:dim\
  :hue:command\
  :color_temp:program\
  :saturation:mode
attr DEVICE setStateList on off
# computed_color will send RGB = 255,255,255 when in white mode. This is useful for HomeAssistant where it always expects the color to be set.
attr DEVICE model X_01a_esp_milight_hub_rgb_cct_bulb

#cct-only-bulb
name:X_01b_esp_milight_hub_cct_only_bulb
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge <br>NOTE: Development state is experimental! <br>simple CCT device
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE readingList \
  BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
  on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
  off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
  brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
  mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
attr DEVICE webCmd brightness:dim:command:program:mode
attr DEVICE webCmdLabel :dim\
  :::
attr DEVICE setStateList on off
attr DEVICE model X_01b_esp_milight_hub_cct_only_bulb

#rgbw-bulb
name:X_01x_esp_milight_hub_max_features_bulb
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge <br>Device could contain more options than your physical device might be able to handle. Just delete, what you don't need...<br>NOTE: Development state is experimental! <br>NOTE: regex not working to extract remote channel... Topic is something like milight/updates/0xABCD/rgbw/0
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE readingList \
  BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
  BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
  on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
  off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
  brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  color_temp:colorpicker,CT,153,1,370 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  saturation:colorpicker,BRI,0,1,100 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
  mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
  dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
attr DEVICE webCmd on:off:brightness:dim:hue:command:color_temp:program:saturation:mode
attr DEVICE webCmdLabel    An:Aus\
  :Helligkeit:Dimmen\
  :HUE:Command\
  :Farb-Temp:Programm\
  :Sättigung:Modus
attr DEVICE setStateList on off
attr DEVICE model X_01x_esp_milight_hub_max_features_bulb