###########################################
# $Id$
#
# Comments start with #. Empty lines are ignored.
# Syntax of one entry: name: line, one optional filter: line, zero or more par: lines, FHEM-Commands
# filter:INTERNAL=VALUE (optional)
# par: name of the parameter; comment; perl_code (optional)
# perl_code returns a value for the parameter, or undef.
# If undef, the user has to specify them (the comment is shown to the user)
###########################################
name:General_Info
filter:TYPE=MQTT2_DEVICE
desc: Forum Thread for
- suggesting new templates
- bug reports on mqtt2.template
NOTE: Some templates are only visible in case the existing device configuration meets some minimum requirements, e.g. the CID starting with "zigbee"!
Have a look in the mqtt2.template file itself to get more info
order:000000
###############
#MQTT2_CLIENT_Bridge
#
name:MQTT2_CLIENT_general_bridge
filter:TYPE=MQTT2_DEVICE
desc:recommended to use this as general bridgeing device when using MQTT2_CLIENT as IO to get around missing CID info for distinguishing different popular devices
NOTE:
This might create a new MQTT2-device or change existing ones, especially destroy readingList attributes!
order:000001
par:IODEVNAME;Name of the IO-Device; { AttrVal("DEVICE","IODev",undef) }
par:DEVTYPE;TYPE of the device; { InternalVal("DEVICE","TYPE",undef)}
par:DEVCID;CID of the device as written in the DEF; { InternalVal(AttrVal("DEVICE","IODev",""),"clientId","mosquitto") eq InternalVal("DEVICE","DEF","mosquitto") ? "MQTT2_GeneralBridge" : InternalVal("DEVICE","DEF","mosquitto")}
par:NEWDEVROOM;Room of the calling device; {AttrVal("DEVCID","room","MQTT2_\DEVICE" )}
defmod DEVCID MQTT2_\DEVICE DEVCID
attr DEVCID bridgeRegexp \
(tele|cmnd)[/]([^/]+)[/].*:.* "$2"\
shellies[/]([^/]+)[/].*:.* "$1"\
(ESPClient_[^/]+)[/].*:.* "$1"
attr DEVCID autocreate 1
attr DEVCID comment Do not use very open bridgeRegexp expressions! This might lead to irritating results...
attr DEVCID room NEWDEVROOM
attr DEVCID setStateList on off
deleteAttr DEVICE readingList
deletereading -q DEVICE (?!associatedWith).*
deleteAttr DEVCID readingList
deletereading -q DEVCID (?!associatedWith).*
setreading DEVCID associatedWith DEVICE
{ fhem "trigger $FW_wname JS:location.href='$FW_ME?detail=DEVCID'" if($cl && $cl->{TYPE} eq "FHEMWEB") }
farewell:template has been applied successfully. Be carefull when extending the brigeRegexp!
attr DEVCID model MQTT2_CLIENT_general_bridge
###########################################
# zigbee2mqtt
# The zigbee2mqtt bridge device (entire hex id of devices as bridgeRegexp)
name:zigbee2mqtt_bridge
desc:The zigbee2mqtt bridge device
filter:TYPE=MQTT2_DEVICE
order:L_01
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
attr DEVICE bridgeRegexp\
BASE_TOPIC/([A-Za-z0-9._]*)[/]?.*:.* "zigbee_$1"
attr DEVICE getList\
devicelist:noArg log BASE_TOPIC/bridge/config/devices\
networkmap_raw:noArg raw BASE_TOPIC/bridge/networkmap raw\
networkmap_graphviz:noArg graphviz BASE_TOPIC/bridge/networkmap graphviz
attr DEVICE readingList\
BASE_TOPIC/bridge/state:.* state\
BASE_TOPIC/bridge/config/devices:.* {}\
BASE_TOPIC/bridge/config/log_level:.* log_level\
BASE_TOPIC/bridge/config/permit_join:.* permit_join\
BASE_TOPIC/bridge/config/rename:.* { json2nameValue($EVENT, 'rename_') }\
BASE_TOPIC/bridge/log:.*\"type\".\"devices\".\"message\".* devices\
BASE_TOPIC/bridge/log:.* log\
BASE_TOPIC/bridge/networkmap:.* {}\
BASE_TOPIC/bridge/networkmap/graphviz:.* graphviz\
BASE_TOPIC/bridge/networkmap/raw:.* raw\
BASE_TOPIC/bridge/config:.* { json2nameValue($EVENT) }
attr DEVICE setList\
log_level:debug,info,warn,error BASE_TOPIC/bridge/config/log_level $EVTPART1\
permit_join:true,false BASE_TOPIC/bridge/config/permit_join $EVTPART1\
remove:textField BASE_TOPIC/bridge/config/remove $EVTPART1\
y_device_setting:textField BASE_TOPIC/$EVTPART1/set {"$EVTPART2": "$EVTPART3"}\
x_bind:textField BASE_TOPIC/bridge/bind/$EVTPART1 $EVTPART2\
x_bind_unbind:textField BASE_TOPIC/bridge/unbind/$EVTPART1 $EVTPART2\
x_device_options:textField BASE_TOPIC/bridge/config/device_options {"friendly_name":"$EVTPART1","options": {"$EVTPART2": "$EVTPART3"}}\
x_group_add_to:textField BASE_TOPIC/bridge/group/$EVTPART1/add $EVTPART2\
x_group_rm_from:textField BASE_TOPIC/bridge/group/$EVTPART1/remove $EVTPART2\
x_group_rm_from_all:textField BASE_TOPIC/bridge/group/$EVTPART1/remove_all $EVTPART2\
x_group_add_group:textField BASE_TOPIC/bridge/config/add_group $EVTPART1\
x_group_rm_group:textField BASE_TOPIC/bridge/config/remove_group $EVTPART1\
z_elapsed:textField BASE_TOPIC/bridge/config/elapsed $EVTPART1\
z_last_seen:textField BASE_TOPIC/bridge/config/last_seen $EVTPART1\
z_ban:textField BASE_TOPIC/bridge/config/ban $EVTPART1\
z_rename:textField BASE_TOPIC/bridge/config/rename {"old":"$EVTPART1","new":"$EVTPART2"}\
z_reset_CC:noArg BASE_TOPIC/bridge/config/reset
attr DEVICE setStateList on off
attr DEVICE model zigbee2mqtt_bridge
# Based on https://forum.fhem.de/index.php/topic,94060.msg872371.html#msg872371
# A dimmable light connected via zigbee2mqtt
name:zigbee2mqtt_light_dimmer
desc: A dimmable light connected via zigbee2mqtt
Tested with: Tradfri LED1650R5, Osram Lightify W32
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_02a
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon light_control
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}
attr DEVICE setStateList on off
attr DEVICE model zigbee2mqtt_light_dimmer
# A dimmable color light connected via zigbee2mqtt
name:zigbee2mqtt_light_cct
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
desc: A dimmable light with color temperature via zigbee2mqtt
order:L_02b
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon light_control
attr DEVICE webCmd toggle:on:off:brightness:color_temp
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}
attr DEVICE model zigbee2mqtt_light_cct
#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:zigbee2mqtt_light_rgb_hex
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
desc: A dimmable rgb light connected via zigbee2mqtt
rgb value is encoded as HEX value
Experimental, still untested
order:L_02c
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:hex
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE userReadings hex:color_y.* {Color::xyY2hex(ReadingsVal($name,"color_x",0),ReadingsVal($name,"color_y",0),ReadingsVal($name,"brightness",254))}
attr DEVICE model zigbee2mqtt_light_rgb_hex
name:zigbee2mqtt_light_rgb_rgb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
desc: A dimmable rgb light connected via zigbee2mqtt
rgb values will be sent as individual values r,g and b
Experimental, still untested
order:L_02c
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model zigbee2mqtt_light_rgb_rgb
#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:zigbee2mqtt_light_rgbw_hex
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
desc: A dimmable rgbw light connected via zigbee2mqtt
rgb value is encoded as HEX value
tested with Mueller Light tint RGBW bulb
order:L_02d
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color_temp:warm:white:hex
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
warm:noArg BASE_TOPIC/DEV_ID/set {"brightness": 200 , "color_temp": 360}\
white:noArg BASE_TOPIC/DEV_ID/set {"brightness": 254, "color_temp": 250}\
color_temp:colorpicker,CT,250,1,454 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE userReadings hex:color_y.* {Color::xyY2hex(ReadingsVal($name,"color_x",0),ReadingsVal($name,"color_y",0),ReadingsVal($name,"brightness",254))}
attr DEVICE model zigbee2mqtt_light_rgbw_hex
#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:zigbee2mqtt_light_rgbw_rgb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_02d1
desc: A dimmable rgbw light connected via zigbee2mqtt
rgb values will be sent as individual values r,g and b
Experimental, still untested
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color:white
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
white:noArg BASE_TOPIC/DEV_ID/set {"color_temp": 154 , "color_temp": 500}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model zigbee2mqtt_light_rgbw_rgb
#source post: https://forum.fhem.de/index.php/topic,96985.msg902627.html#msg902627
name:zigbee2mqtt_light_rgbcct_hex
desc: A dimmable rgb light connected via zigbee2mqtt
rgb value is encoded as HEX value
Experimental, still untested
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_02e
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color_temp:hex
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
hex:colorpicker,HEX,0,15,255 BASE_TOPIC/DEV_ID/set {"color":{"$EVTPART0":"#$EVTPART1"}}
attr DEVICE model zigbee2mqtt_light_rgbcct_hex
#source post: https://forum.fhem.de/index.php/topic,97303.msg905935.html#msg905935
name:zigbee2mqtt_light_rgbcct_rgb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_02e1
desc: A dimmable rgb-cct light connected via zigbee2mqtt
rgb values will be sent as individual values r,g and b
Tested with: RGB-CCT GL-C-008
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE icon hue_filled_white_and_color_e27_b22
attr DEVICE stateFormat {lc ReadingsVal($name,"state",0)}
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE webCmd toggle:on:off:brightness:color_temp:color
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
on:noArg BASE_TOPIC/DEV_ID/set {"state":"ON"}\
off:noArg BASE_TOPIC/DEV_ID/set {"state":"OFF"}\
brightness:colorpicker,BRI,0,5,255 BASE_TOPIC/DEV_ID/set {"state":"on","$EVTPART0":"$EVTPART1"}\
color_temp:colorpicker,CT,154,2,500 BASE_TOPIC/DEV_ID/set {"$EVTPART0":"$EVTPART1"}\
color:colorpicker,RGB {"BASE_TOPIC/DEV_ID/set ".zigbee2mqtt_RGB2JSON($EVTPART1)}
attr DEVICE model zigbee2mqtt_light_rgbcct_rgb
name:zigbee2mqtt_smokeDetector
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_03
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE icon secur_smoke_detector
attr DEVICE stateFormat smoke
attr DEVICE model zigbee2mqtt_smokeDetector
name:zigbee2mqtt_hueMotionSensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_04
attr DEVICE stateFormat T: temperature_weather B: illuminance L: linkquality
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE userReadings temperature_weather { sprintf("%.1f",ReadingsVal($name,"temperature","")+2.5) }
attr DEVICE model zigbee2mqtt_hueMotionSensor
name:zigbee2mqtt_smart+plug
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_05
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE eventMap { dev=>{ON=>'on',OFF=>'off'} }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
attr DEVICE setList \
off BASE_TOPIC/DEV_ID/set OFF\
on BASE_TOPIC/DEV_ID/set ON
attr DEVICE model zigbee2mqtt_smart+plug
name:zigbee2mqtt_ContactSensor
desc: Contact sensor via zigbee2mqtt
Tested with: Xiaomi models Aqara and Mijia
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_06
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat contact
attr DEVICE devStateIcon open:fts_window_1w_open@red close:fts_window_1w@green
#attr DEVICE genericDeviceType contact
attr DEVICE eventMap true:close false:open
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_ContactSensor
name:zigbee2mqtt_TempHumHpaSensor
desc: Temp/hum/hpa sensor via zigbee2mqtt
Tested with: Xiaomi Aqara WSDCGQ11LM Temperature Humidity Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_07
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat {sprintf ("Temperature: %.1f°C Humidity: %.1f%% Pressure: %.1fhpa", ReadingsVal($name,"temperature",0), ReadingsVal($name,"humidity",0), ReadingsVal($name,"pressure",0)) }
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_TempHumHpaSensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:zigbee2mqtt_TempHumSensor
desc: Temp/hum sensor via zigbee2mqtt
Tested with: Xiaomi MiJia WSDCGQ01LM Temperature Humidity Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_07a
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat T: temperature H: humidity
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_TempHumSensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:zigbee2mqtt_Human_Motion_Sensor
desc: Human motion sensor via zigbee2mqtt
Tested with: Xiaomi Aqara RTCGQ11LM Human Motion Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_08
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Motion: occupancy Luminance: illuminance
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_Human_Motion_Sensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg975785.html#msg975785
# Osram Lightify, Smart+ Motion Sensor
name:zigbee2mqtt_TempMotion_sensor
desc: Temperature and motion sensor via zigbee2mqtt
Tested with: Osram Lightify Motion Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_08a
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Motion: occupancy T: temperature
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_TempMotion_sensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:zigbee2mqtt_Motion_Sensor
desc: Smart motion sensor via zigbee2mqtt
Tested with: Xiaomi Aqara DJT11LM Smart Motion Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_09
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Motion: action X: angle_x Y: angle_y Z: angle_z
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_Motion_Sensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:zigbee2mqtt_Water_Leak_Sensor
desc: Water leak sensor via zigbee2mqtt
Tested with: Xiaomi Aqara SJCGQ11LM Water Leak Sensor
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_10
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/](.*):, ? $1 : undef }
attr DEVICE stateFormat Leak: water_leak
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_Water_Leak_Sensor
#source post: https://forum.fhem.de/index.php/topic,94495.msg898198.html#msg898198
name:zigbee2mqtt_Light_Switch
desc: Smart light switch 2btn via zigbee2mqtt
Tested with: Xiaomi Aqara WXKG02LM 2btn Smart Light Switch
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_11
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat click
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_Light_Switch
#source post: https://forum.fhem.de/index.php/topic,94495.msg916789.html#msg916789
name:zigbee2mqtt_Wireless_Button
desc: Wireless button via zigbee2mqtt
Tested with: Xiaomi Aqara WXKG12LM wireless switch with gyroscope
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_12
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Click: click Action: action
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_Wireless_Button
name:zigbee2mqtt_wireless_button_old
desc: Wireless button without gyro via zigbee2mqtt
Tested with: Xiaomi Aqara WXKG11LM wireless button
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_13
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Click: click
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_wireless_button_old
name:zigbee2mqtt_aqara_cube
desc: Aqara smarthome cube via zigbee2mqtt
Tested with: Xiaomi Aqara MFKZQ01LM smarthome cube
filter:TYPE=MQTT2_DEVICE:FILTER=CID=zigbee.*
order:L_14
par:BASE_TOPIC;base topic set in configuration.yaml of the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[\b]?([^/:]+)[/].*:, ? $1 : undef }
par:DEV_ID;name of the device in the zigbee2mqtt bridge;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/]([^/]+).*:, ? $1 : undef }
attr DEVICE stateFormat Action: action
attr DEVICE readingList BASE_TOPIC/DEV_ID:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model zigbee2mqtt_aqara_cube
###########################################
# TASMOTA
# The regexp must handle
# - tele/sonoff/LWT: => cmnd/sonoff/
# - DVES_XXXXXX:/SmartHome/Esszimmer/Stehlampe/tele/LWT: => /SmartHome/Esszimmer/Stehlampe/cmnd/
name:tasmota_basic_state_power1
filter:TYPE=MQTT2_DEVICE
desc:Applies to Sonoff Basic, S20 using POWER1-topic for relay state
NOTE: The format the device is sending data will also be changed to lowercase!
NOTE: This template is intended to configure also channel one of multi-channel tasmota devices
order:A_01a
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
attr DEVICE stateFormat POWER1
set DEVICE attrTemplate tasmota_set_lowercase_texts_and_state1
attr DEVICE setList \
off:noArg CMNDTOPIC/POWER1 0\
on:noArg CMNDTOPIC/POWER1 1\
toggle:noArg CMNDTOPIC/POWER1 2\
on-for-timer {my $duration = $EVTPART1 < 11.2 ? $EVTPART1*10 : $EVTPART1+100; 'CMNDTOPIC/Backlog pulseTime1 '.$duration.'; POWER1 1'}
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList on off toggle
attr DEVICE comment NOTE: on-for-timer is limited to 18h max duration!
attr DEVICE autocreate 0
attr DEVICE model tasmota_basic_state_power1
# sonoff 1 channel device flashed with Tasmota.
name:tasmota_basic
filter:TYPE=MQTT2_DEVICE
desc:Applies to Sonoff 1 Channel devices using POWER-topic for relay state
NOTE:
- Power topic will be set to POWER1;
- the format the device is sending data will also be changed to lowercase!
- finally, you'll see the device as model tasmota_basic_state_power1.
order:A_01
set DEVICE attrTemplate tasmota_basic_state_power1
name:tasmota_clear_readings_reset_readingsList_and_reboot
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc: replaces the readingList with defaults, clears the readingList and reboots to get all readings
order:A_01x
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
TELETOPIC/UPTIME:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
set IO_DEV publish CMNDTOPIC/Restart 1
attr DEVICE autocreate 0
name:tasmota_prefix_clearing_and_reboot
filter:TYPE=MQTT2_DEVICE::FILTER=readingList=.*(tele|cmnd|stat).*
desc:Applies to all tasmota devices
NOTE: This template will delete some readings and clear the readingList from prefix use when expanding json.
When applying the template the tasmota device is rebooted to get all readings
order:A_01x1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
par:READINGLISTCLEARED;cleared from prefixes;{ AttrVal("DEVICE","readingList","") =~ s/, '[^_]+[_]'/, ''/g, ? $1 : undef }
attr DEVICE readingList READINGLISTCLEARED
deletereading -q DEVICE (?!associatedWith).*
set IO_DEV publish CMNDTOPIC/Restart 1
attr DEVICE autocreate 0
# tasmota device with one relay, one motion sensor via switch
name:tasmota_1ch+motion+SI7021
desc:tasmota device with one relay, one motion sensor via switch and one SI7021 combined temperature and humidity sensor.
Configures a single device including all readings
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
order:A_01b
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
attr DEVICE setList \
off:noArg CMNDTOPIC/POWER1 0\
on:noArg CMNDTOPIC/POWER1 1\
toggle:noArg CMNDTOPIC/POWER1 2
attr DEVICE stateFormat {\
ReadingsVal($name, "POWER1", "off") . " "\
ReadingsVal($name, "POWER2", "off") . " "\
. sprintf("%.1f°C ",ReadingsVal($name,"SI7021_Temperature",0))\
. sprintf("%.0f%%",ReadingsVal($name,"SI7021_Humidity",0))\
}
attr DEVICE devStateIcon {\
my $state = lc ReadingsVal($name, "POWER2", "off");\
my $devStateIcon = 'building_security@green';\
if ($state eq "on") {\
$devStateIcon = 'building_security@red';\
}\
"" . FW_makeImage(lc ReadingsVal($name, "POWER1", "off"))\
. FW_makeImage($devStateIcon) . sprintf(\
" [Temp: %.1f°C / Feucht: %.0f%%]",\
ReadingsVal($name,"SI7021_Temperature",0),\
ReadingsVal($name,"SI7021_Humidity",0)\
) . "
"\
}
attr DEVICE model tasmota_1ch+motion+SI7021
name:tasmota_POW
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Applies to Sonoff POW devices
NOTE: Power topic will be set to POWER1; the format the device is sending data will also be changed to lowercase!
order:A_01c
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
set DEVICE attrTemplate tasmota_basic_state_power1
attr DEVICE setList \
off:noArg CMNDTOPIC/POWER1 0\
on:noArg CMNDTOPIC/POWER1 1\
toggle:noArg CMNDTOPIC/POWER1 2
attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"LWT","false") eq "Online"?"10px-kreis-gruen":"10px-kreis-rot";; my $light = ReadingsVal($name,"state","off");;"".FW_makeImage($onl)." ".FW_makeImage($light)." uptime: ".ReadingsVal($name,"Uptime",undef).sprintf(" aktuell: %.1f W Tag: %.2f kWh Gestern: %.3f kWh Gesamt: %.4f kWh", ReadingsVal($name,"ENERGY_Power",undef), ReadingsVal($name,"ENERGY_Today",undef), ReadingsVal($name,"ENERGY_Yesterday",undef), ReadingsVal($name,"ENERGY_Total",undef))}
attr DEVICE stateFormat {sprintf("aktuell: %.1f W Tag: %.2f kWh Gestern: %.3f kWh Gesamt: %.4f kWh", ReadingsVal($name,"ENERGY_Power",undef), ReadingsVal($name,"ENERGY_Today",undef), ReadingsVal($name,"ENERGY_Yesterday",undef), ReadingsVal($name,"ENERGY_Total",undef))}
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList on off toggle
attr DEVICE webCmd :
attr DEVICE model tasmota_POW
#tasmota device with Infrared-circuit
name:tasmota_ir
desc:Demonstrates multiple options how to configure tasmota devices as IR remote control extension.
Forum Thread
Tasmota IRremote Commands
Simple IR-circuit
set irsend
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
order:A_01d
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:POWERCMD;needed command to be sent like in example dec '{"protocol":"NEC","bits":32,"data":551489775}' (without '');{ undef }
par:VOLUMEUPCMD;needed command to be sent like in example raw '0,926,844,958,832,1798,868,902,848,900,870,900,852,908,918,958,794,934,874,928,1738,934,856,1764' (without '');{ undef }
par:MULTIPLE1CMD;needed command to be sent like in example hex '{"Protocol":"NEC","Bits":32,"Data":0x8166817E}' (without '');{ undef }
par:MULTIPLE2CMD;needed command to be sent like in example hex '{"Protocol":"NEC","Bits":32,"Data":0x8166817E}' (without '');{ undef }
attr DEVICE setList \
power:noArg CMNDTOPIC/IRsend POWERCMD\
volumeup:noArg CMNDTOPIC/IRsend VOLUMEUPCMD\
11:noArg CMNDTOPIC/Backlog IRsend MULTIPLE1CMD;CMNDTOPIC/delay 8;CMNDTOPIC/IRsend MULTIPLE2CMD\
irsend:textField CMNDTOPIC/irsend {"Protocol":"$EVTPART1","Bits":$EVTPART2,"Data":"0x$EVTPART3"}
attr DEVICE readingList \
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
TELETOPIC/RESULT:.* { $EVENT =~ m,..IrReceived....Protocol...([A-Za-z0-9]+)...Bits..([\d]+)..Data...([A-Za-z0-9]+)..., ? {"$1_$2"=>$3} : json2nameValue($EVENT) }
attr DEVICE stateFormat state\
\
IPAddress
attr DEVICE event-on-change-reading .*
attr DEVICE icon IR
attr DEVICE model tasmota_ir
#tasmota device with rf-circuit
name:tasmota_rf
desc:Demonstrates multiple options how to configure tasmota devices as rf remote control extension.
Forum Thread
NOTE: still widely untested...
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
order:A_01d1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
#par:POWERCMD;needed command to be sent like in example dec '{"protocol":"NEC","bits":32,"data":551489775}' (without '');{ undef }
#par:VOLUMEUPCMD;needed command to be sent like in example raw '0,926,844,958,832,1798,868,902,848,900,870,900,852,908,918,958,794,934,874,928,1738,934,856,1764' (without '');{ undef }
#par:MULTIPLE1CMD;needed command to be sent like in example hex '{"Protocol":"NEC","Bits":32,"Data":0x8166817E}' (without '');{ undef }
#par:MULTIPLE2CMD;needed command to be sent like in example hex '{"Protocol":"NEC","Bits":32,"Data":0x8166817E}' (without '');{ undef }
attr DEVICE setList \
power:noArg CMNDTOPIC/RFsend POWERCMD\
volumeup:noArg CMNDTOPIC/RFsend VOLUMEUPCMD\
rfsend:textField CMNDTOPIC/RFsend {"Protocol":"$EVTPART1","Bits":$EVTPART2,"Data":"0x$EVTPART3"}
attr DEVICE readingList \
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
TELETOPIC/RESULT:.* { $EVENT =~ m,..RfReceived....Sync..([A-Za-z0-9]+)..Low..([\d]+)..High..([\d]+)..Data...([A-Za-z0-9]+)...RfKey...([^"]+)..., ? {"json_raw"=>$EVENT} : undef }\
TELETOPIC/RESULT:.* { $EVENT =~ m,..RfReceived....Sync..([A-Za-z0-9]+)..Low..([\d]+)..High..([\d]+)..Data...([A-Za-z0-9]+)...RfKey...([^"]+)..., ? {"Data"=>"$4"} : undef }
attr DEVICE stateFormat state\
\
IPAddress
attr DEVICE event-on-change-reading .*
attr DEVICE model tasmota_rf
# tasmota 2ch as one FHEM device.
name:tasmota_2ch_unified
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Configures a single device including all readings
order:A_02a
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
attr DEVICE setList \
POWER1:on,off,toggle CMNDTOPIC/POWER1 $EVTPART1\
POWER2:on,off,toggle CMNDTOPIC/POWER2 $EVTPART1
attr DEVICE webCmd POWER1 on:POWER1 off:POWER2 on:POWER2 off
attr DEVICE devStateIcon Online:10px-kreis-gruen Offline:10px-kreis-rot 1.on:on:POWER1+off 1.off:off:POWER1+on 2.on:on:POWER2+off 2.off:off:POWER2+on
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }\
TELETOPIC/UPTIME:.* { json2nameValue($EVENT) }\
STATTOPIC/POWER1:.* POWER1\
STATTOPIC/POWER2:.* POWER2
attr DEVICE stateFormat LWT\
1:POWER1\
2:POWER2\
\
IPAddress
attr DEVICE webCmd POWER1:POWER2
attr DEVICE model tasmota_2ch_unified
# sonoff 2 channel device flashed with Tasmota.
name:tasmota_2channel_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:sonoff 2 channel device flashed with Tasmota.
NOTE: a second device will be created for the second channel
order:A_02
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 stateFormat POWER2
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE
attr DEVICE_CH2 setList \
off:noArg CMNDTOPIC/POWER2 0\
on:noArg CMNDTOPIC/POWER2 1\
toggle:noArg CMNDTOPIC/POWER2 2
attr DEVICE_CH2 setStateList on off toggle
attr DEVICE model tasmota_2channel_split
attr DEVICE_CH2 model tasmota_2channel_split
#contributed by 87insane
# tasmota 2ch as shutter device.
name:tasmota_2ch_shutter_invert_1
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Configures a dual chanel tasmota device as shutter; needs a special firmware version to operate.
Forum Thread
NOTE: This template will configure the shutter in ROLLO style with pct 0% = open shutter. Use template tasmota_2ch_shutter_invert_0, if you need a Homematic-style device pct 100% = open.
order:A_02b
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
set DEVICE attrTemplate tasmota_set_lowercase_texts_and_state1
set IO_DEV publish CMNDTOPIC/Backlog LedState 2; SetOption80 1; Interlock0 1; SetOption81 1; switchmode1 3; switchmode2 3; SaveData 1;
set IO_DEV publish CMNDTOPIC/Restart 1
defmod configure_DEVICEattrTemplate_at at +00:00:20 set IO_DEV publish CMNDTOPIC/Backlog SHUTTEROPENDURATION 20;; SHUTTERCLOSEDURATION 20;; SHUTTERINVERT 1;; GROUPTOPIC Rollos;; SaveData 1;;
attr DEVICE setList \
close:noArg CMNDTOPIC/SHUTTERCLOSE\
open:noArg CMNDTOPIC/SHUTTEROPEN\
half:noArg CMNDTOPIC/SHUTTERPOSITION 50\
pct:slider,0,1,100 CMNDTOPIC/SHUTTERPOSITION $EVTPART1\
stop:noArg CMNDTOPIC/SHUTTERSTOP\
resetClose:noArg CMNDTOPIC/SHUTTERSETCLOSE\
x_configuration CMNDTOPIC/$EVTPART1 $EVTPART2
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }\
STATTOPIC/POWER1:.* POWER1\
STATTOPIC/POWER1:on {{'state' => 'opening'}}\
STATTOPIC/POWER2:.* POWER2\
STATTOPIC/POWER2:on {{'state' => 'closing'}}\
STATTOPIC/SHUTTER1:.* state\
STATTOPIC/SHUTTER1:.* pct\
TELETOPIC/RESULT:.* { json2nameValue($EVENT) }\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
TELETOPIC/UPTIME:.* { json2nameValue($EVENT) }
attr DEVICE devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red Online:10px-kreis-gruen Offline:10px-kreis-rot 100:fts_shutter_100 0:fts_shutter_10 9\d.*:fts_shutter_90 8\d.*:fts_shutter_80 7\d.*:fts_shutter_70 6\d.*:fts_shutter_60 5\d.*:fts_shutter_50 4\d.*:fts_shutter_40 3\d.*:fts_shutter_30 2\d.*:fts_shutter_20 1\d.*:fts_shutter_10 \b\d\b.*:fts_shutter_10 set_.*:fts_shutter_updown
attr DEVICE cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
attr DEVICE webCmd :open:close:half:stop:pct
attr DEVICE stateFormat \
LWT\
\
state
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList open close half stop pct
attr DEVICE comment After applying the template set SHUTTEROPENDURATION and SHUTTERCLOSEDURATION first.\
Use the "set x_configuration" Option. Example: "set x_configuration SHUTTEROPENDURATION 35"\
Shutter specific commands available: SHUTTEROPENDURATION, SHUTTERCLOSEDURATION, SHUTTERRELAY, SHUTTER50PERCENT, SHUTTERSETCLOSE, SHUTTERINVERT; you may use this for general setOptions in tasmota also.\
commands may need restart to take effect.\
For calibration and further information on the available commands see https://github.com/stefanbode/Sonoff-Tasmota/wiki/Shutter-blinds-working-with-two-relays.
farewell:template has been applied successfully. Now it's recommended to set shutter's open and close duration and 50% position, see short instruction in comment attribute or the
firmware contributor's wiki.
attr DEVICE model tasmota_2ch_shutter_invert_1
# tasmota 2ch as shutter device.
name:tasmota_2ch_shutter_invert_0
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Configures a dual chanel tasmota device as shutter; needs a special firmware version to operate.
Forum Thread
NOTE: This template will configure the shutter in Homematic-style with pct 100% = open. For ROLLO style device with pct 0% = open shutter. Use template tasmota_2ch_shutter_invert_1 instead.
order:A_02b1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
set DEVICE attrTemplate tasmota_2ch_shutter_invert_1
defmod configure_DEVICEattrTemplate_at at +00:00:20 set IO_DEV publish CMNDTOPIC/Backlog SHUTTEROPENDURATION 20;; SHUTTERCLOSEDURATION 20;; SHUTTERINVERT 0;; GROUPTOPIC Rollos;; SaveData 1;;
attr DEVICE devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red Online:10px-kreis-gruen Offline:10px-kreis-rot 100:fts_shutter_10 0:fts_shutter_100 9\d.*:fts_shutter_10 8\d.*:fts_shutter_20 7\d.*:fts_shutter_30 6\d.*:fts_shutter_40 5\d.*:fts_shutter_50 4\d.*:fts_shutter_60 3\d.*:fts_shutter_70 2\d.*:fts_shutter_80 1\d.*:fts_shutter_90 \b\d\b.*:fts_shutter_90
attr DEVICE model tasmota_2ch_shutter_invert_0
# sonoff 4 channel device flashed with Tasmota.
# contributed by Blauhorn, https://forum.fhem.de/index.php/topic,94495.msg976113.html#msg976113
name:tasmota_4channel_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:sonoff 4 channel device flashed with Tasmota.
NOTE: a second, third and fourth device will be created for each additional channel
order:A_04
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
setreading DEVICE associatedWith DEVICE_CH2,DEVICE_CH3,DEVICE_CH4
#create device for CH2
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 stateFormat POWER2
setreading DEVICE associatedWith DEVICE,DEVICE_CH3,DEVICE_CH4
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
attr DEVICE_CH2 setList \
off:noArg CMNDTOPIC/POWER2 0\
on:noArg CMNDTOPIC/POWER2 1\
toggle:noArg CMNDTOPIC/POWER2 2
attr DEVICE_CH2 setStateList on off toggle
#create device for CH3
copy DEVICE DEVICE_CH3
attr DEVICE_CH3 stateFormat POWER3
setreading DEVICE_CH3 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH4
attr DEVICE comment Channel 3 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH4
attr DEVICE_CH3 setList \
off:noArg CMNDTOPIC/POWER3 0\
on:noArg CMNDTOPIC/POWER3 1\
toggle:noArg CMNDTOPIC/POWER3 2
attr DEVICE_CH3 setStateList on off toggle
#create device for CH4
copy DEVICE DEVICE_CH4
attr DEVICE_CH4 stateFormat POWER4
setreading DEVICE_CH4 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH3
attr DEVICE_CH4 comment Channel 4 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH3
attr DEVICE_CH4 setList \
off:noArg CMNDTOPIC/POWER4 0\
on:noArg CMNDTOPIC/POWER4 1\
toggle:noArg CMNDTOPIC/POWER4 2
attr DEVICE_CH4 setStateList on off toggle
#set the model attr for all new devices
attr DEVICE model tasmota_4channel_split
attr DEVICE_CH2 model tasmota_4channel_split
attr DEVICE_CH3 model tasmota_4channel_split
attr DEVICE_CH4 model tasmota_4channel_split
# tasmota 4ch as one FHEM device.
name:tasmota_4ch_unified_icon
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Configures a single device including all readings
NOTE: Clicking on icons will issue a corresponding toggle command
order:A_04b
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
attr DEVICE setList \
POWER1:on,off,toggle CMNDTOPIC/POWER1 $EVTPART1\
POWER2:on,off,toggle CMNDTOPIC/POWER2 $EVTPART1\
POWER3:on,off,toggle CMNDTOPIC/POWER3 $EVTPART1\
POWER4:on,off,toggle CMNDTOPIC/POWER4 $EVTPART1
attr DEVICE devStateIcon Online:10px-kreis-gruen Offline:10px-kreis-rot 1.on:on:POWER1+off 1.off:off:POWER1+on 2.on:on:POWER2+off 2.off:off:POWER2+on 3.on:on:POWER3+off 3.off:off:POWER3+on 4.on:on:POWER4+off 4.off:off:POWER4+on
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }\
TELETOPIC/UPTIME:.* { json2nameValue($EVENT) }\
STATTOPIC/POWER1:.* POWER1\
STATTOPIC/POWER2:.* POWER2\
STATTOPIC/POWER3:.* POWER3\
STATTOPIC/POWER4:.* POWER4
attr DEVICE stateFormat LWT\
1:POWER1\
2:POWER2\
3:POWER3\
4:POWER4\
\
IPAddress
attr DEVICE webCmd POWER1:POWER2:POWER3:POWER4
attr DEVICE model tasmota_4ch_unified_icon
# tasmota 4ch as one FHEM device.
name:tasmota_4ch_unified_basic_text
desc:Configures a single device
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
order:A_04a1
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
TELETOPIC/SENSOR:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }
attr DEVICE setList \
POWER1:on,off,toggle CMNDTOPIC/POWER1 $EVTPART1\
POWER2:on,off,toggle CMNDTOPIC/POWER2 $EVTPART1\
POWER3:on,off,toggle CMNDTOPIC/POWER3 $EVTPART1\
POWER4:on,off,toggle CMNDTOPIC/POWER4 $EVTPART1
attr DEVICE setStateList on off toggle
attr DEVICE stateFormat P1: POWER1 P2: POWER2 P3: POWER3 P4: POWER4
attr DEVICE webCmd POWER1 toggle:POWER2 toggle:POWER3 toggle:POWER4 toggle
attr DEVICE model tasmota_4ch_unified_basic_text
#source post: https://forum.fhem.de/index.php/topic,94495.msg899041.html#msg899041
name:tasmota_rgb_led_controller
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Tasmota RGB controller tested with RGB variant of Magichome, arilux LC-01 ,etc... -> https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller
order:A_05a
set DEVICE attrTemplate tasmota_basic_state_power1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:TELETOPIC;info topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}tele$3" : undef }
par:STATTOPIC;ack topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}stat$3" : undef }
attr DEVICE setList\
off:noArg CMNDTOPIC/POWER1 0\
on:noArg CMNDTOPIC/POWER1 1\
toggle:noArg CMNDTOPIC/POWER1 2\
Color:colorpicker,RGB CMNDTOPIC/COLOR\
Dimmer:colorpicker,BRI,0,5,100 CMNDTOPIC/DIMMER
attr DEVICE readingList \
TELETOPIC/LWT:.* LWT\
STATTOPIC/POWER:.* POWER\
STATTOPIC/POWER1:.* POWER1\
TELETOPIC/STATE:.* { json2nameValue($EVENT) }\
STATTOPIC/RESULT:.* { json2nameValue($EVENT) }\
TELETOPIC/INFO.:.* { json2nameValue($EVENT) }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE autocreate 0
attr DEVICE devStateIcon {Color::devStateIcon($name,"rgb","Color","Dimmer","POWER1")}
attr DEVICE icon light_control
attr DEVICE stateFormat POWER1
attr DEVICE webCmd Color:Color ff0000:Color 00ff00:Color 0000ff:toggle:on:off
attr DEVICE model tasmota_rgb_led_controller
name:tasmota_set_lowercase_texts_and_state1
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Applies to all tasmota devices
NOTE: This template will change ON, OFF etc. sent from tasmota side to lowercase.
After applying the template you might consider to delete or change stateFormat, eventMap and/or userReadings attribute values
order:A_01z
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
set IO_DEV publish CMNDTOPIC/Backlog StateText1 off; StateText2 on; StateText3 toggle; StateText4 hold; SetOption26 1; SaveData 1
name:tasmota_set_uppercase_texts_and_state1
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Applies to all tasmota devices
NOTE: This template will change on, off etc. sent from tasmota side to uppercase. NOTE: this template only exists for compability reasons to older MQTT implementations; not recommended for other user groups
order:A_01z1
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef) }
set IO_DEV publish CMNDTOPIC/Backlog StateText1 OFF; StateText2 ON; StateText3 TOGGLE; StateText4 HOLD; SetOption26 1
attr DEVICE userReadings state:POWER1:.* { lc(ReadingsVal($name,"POWER1","")) }
name:tasmota_set_power1_state_to_power
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*(tele|cmnd|stat).*
desc:Applies to single relay tasmota devices
NOTE: this template only exists for compability reasons to other HA solutions; not recommended for usage in FHEM context
order:A_01z2
par:CMNDTOPIC;Command topic prefix, without trailing /;{ AttrVal("DEVICE","readingList","") =~ m,([^:]*)\b(tele|cmnd|stat)(/.*)?/LWT:, ? "${1}cmnd$3" : undef }
par:IO_DEV;Currently used IO;{ AttrVal("DEVICE","IODev",undef)}
set IO_DEV publish CMNDTOPIC/SetOption26 0
attr DEVICE userReadings state:POWER:.* { lc(ReadingsVal($name,"POWER","")) }
###########################################
# SHELLY
#
# shelly1 using original firmware.
name:shelly1
filter:TYPE=MQTT2_DEVICE
par:DEVNAME;Shelly1 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
order:A_10
attr DEVICE setList\
off:noArg shellies/DEVNAME/relay/0/command off\
on:noArg shellies/DEVNAME/relay/0/command on\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE readingList \
shellies/DEVNAME/relay/0:.* state\
shellies/DEVNAME/relay/0:.* relay0\
shellies/DEVNAME/input/0:.* input0\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model shelly1
# shellyplug using original firmware.
name:shellyplug
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
order:A_10a
par:DEVNAME;ShellyPlug name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate shelly1
attr DEVICE getList power:noArg shellies/DEVNAME/relay/power power
attr DEVICE model shellyplug
#contributed by 87insane, https://forum.fhem.de/index.php/topic,94060.msg934614.html#msg934614
# shelly1pm using original firmware.
name:shelly1_w_energy_meassuring
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
order:A_10b
desc:Applies to single relay Shelly devices offering energy meassuring like Shelly 1PM or Shelly Plug S
par:DEVNAME;Shelly1 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE setList\
relay0:on,off,toggle shellies/DEVNAME/relay/0/command $EVTPART1\
off:noArg shellies/DEVNAME/relay/0/command off\
on:noArg shellies/DEVNAME/relay/0/command on\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE readingList \
shellies/DEVNAME/relay/0:.* state\
shellies/DEVNAME/relay/0:.* relay0\
shellies/DEVNAME/input/0:.* input0\
shellies/DEVNAME/online:.* online\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/DEVNAME/relay/0/power:.* relay_0_power\
shellies/DEVNAME/temperature:.* temperature\
shellies/DEVNAME/overtemperature:.* overtemperature\
shellies/DEVNAME/relay/0/energy:.* relay_0_energy\
shellies/DEVNAME/longpush/0:.* longpush_0
attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"online","false") eq "true"?"10px-kreis-gruen":"10px-kreis-rot";; my $light = ReadingsVal($name,"state","off");; my $cons = ReadingsVal($name,"relay_0_power","unknown");; my $temp = ReadingsVal($name,"temperature","-100");;"".FW_makeImage($onl)." ".FW_makeImage($light)."Verbrauch: $cons / Temp: $temp °C
"}
attr DEVICE webCmd :
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE model shelly1_w_energy_meassuring
# shelly2 using original firmware in roller mode.
name:shelly2_roller
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly2 using original firmware.
NOTE: shelly2 roller operated, change settings first!
order:A_11b
par:DEVNAME;Shelly2 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment shelly2 roller operated
attr DEVICE setList \
open:noArg shellies/DEVNAME/roller/0/command open\
close:noArg shellies/DEVNAME/roller/0/command close\
stop:noArg shellies/DEVNAME/roller/0/command stop\
pct:slider,0,1,100 shellies/DEVNAME/roller/0/command/pos $EVTPART1\
x_recalibration:noArg shellies/DEVNAME/roller/0/command rc\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE readingList \
shellies/DEVNAME/roller/0/pos:.* pct\
shellies/DEVNAME/status/0/rollers:.* power\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/roller/0:.* state\
shellies/DEVNAME/input/1:.* input1\
shellies/DEVNAME/input/0:.* input0
attr DEVICE devStateIcon 0:fts_shutter_100 100:fts_shutter_10 9\d.*:fts_shutter_10 8\d.*:fts_shutter_20 7\d.*:fts_shutter_30 6\d.*:fts_shutter_40 5\d.*:fts_shutter_50 4\d.*:fts_shutter_60 3\d.*:fts_shutter_70 2\d.*:fts_shutter_80 1\d.*:fts_shutter_90 0\d.*:fts_shutter_100 set_.*:fts_shutter_updown
attr DEVICE stateFormat pct
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList open close stop
attr DEVICE model shelly2_roller
# shelly25 using original firmware in roller mode.
# contributed by 87insane, https://forum.fhem.de/index.php/topic,94060.msg940978.html#msg940978
name:shelly25_roller_invert_0
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly25 using original firmware.
NOTE: shelly25 roller operated, change settings first!
order:A_11b1a
par:DEVNAME;Shellyswitch25 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
attr DEVICE setList \
open:noArg shellies/DEVNAME/roller/0/command open\
close:noArg shellies/DEVNAME/roller/0/command close\
half:noArg shellies/DEVNAME/roller/0/command/pos 50\
stop:noArg shellies/DEVNAME/roller/0/command stop\
pct:slider,0,1,100 shellies/DEVNAME/roller/0/command/pos $EVTPART1\
x_recalibration:noArg shellies/DEVNAME/roller/0/command rc\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE readingList \
shellies/DEVNAME/roller/0/pos:.* pct\
shellies/DEVNAME/status/0/rollers:.* power\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/roller/0:.* current\
shellies/DEVNAME/roller/0:open {{'state' => 'opening'}}\
shellies/DEVNAME/roller/0:close {{'state' => 'closing'}}\
shellies/DEVNAME/roller/0/pos:.* state\
shellies/DEVNAME/input/1:.* input1\
shellies/DEVNAME/input/0:.* input0\
shellies/DEVNAME/relay/power:.* power\
shellies/DEVNAME/relay/energy:.* energy\
shellies/DEVNAME/temperature:.* temperature\
shellies/DEVNAME/overtemperature:.* overtemperature
attr DEVICE devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0:fts_shutter_100 100:fts_shutter_10 9\d:fts_shutter_10 8\d:fts_shutter_20 7\d:fts_shutter_30 6\d:fts_shutter_40 5\d:fts_shutter_50 4\d:fts_shutter_60 3\d:fts_shutter_70 2\d:fts_shutter_80 1\d:fts_shutter_90 0\d:fts_shutter_100 set_.*:fts_shutter_updown
attr DEVICE cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
attr DEVICE webCmd :open:close:half:stop:pct
attr DEVICE stateFormat \
online\
\
state
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList open close half stop pct
attr DEVICE model shelly25_roller_invert_0
name:shelly25_roller_invert_1
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly25 using original firmware.
NOTE: shelly25 roller operated, change settings first!
order:A_11b1b
par:DEVNAME;Shellyswitch25 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment Shelly 2.5 in Roller-Mode. 0=opened / 100=closed
attr DEVICE setList \
open:noArg shellies/DEVNAME/roller/0/command open\
close:noArg shellies/DEVNAME/roller/0/command close\
half:noArg shellies/DEVNAME/roller/0/command/pos 50\
stop:noArg shellies/DEVNAME/roller/0/command stop\
pct:slider,0,1,100 {"shellies/DEVNAME/roller/0/command/pos ".(100-$EVTPART1)}\
x_recalibration:noArg shellies/DEVNAME/roller/0/command rc\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE readingList \
shellies/DEVNAME/roller/0/pos:.* {'pct' => 100-$EVENT}\
shellies/DEVNAME/status/0/rollers:.* power\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/roller/0:.* current\
shellies/DEVNAME/roller/0:open {{'state' => 'opening'}}\
shellies/DEVNAME/roller/0:close {{'state' => 'closing'}}\
shellies/DEVNAME/roller/0/pos:.* {'state' => 100-$EVENT}\
shellies/DEVNAME/input/1:.* input1\
shellies/DEVNAME/input/0:.* input0\
shellies/DEVNAME/relay/power:.* power\
shellies/DEVNAME/relay/energy:.* energy\
shellies/DEVNAME/temperature:.* temperature\
shellies/DEVNAME/overtemperature:.* overtemperature
attr DEVICE devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 100:fts_shutter_100 0:fts_shutter_10 9\d:fts_shutter_90 8\d:fts_shutter_80 7\d:fts_shutter_70 6\d:fts_shutter_60 5\d:fts_shutter_50 4\d:fts_shutter_40 3\d:fts_shutter_30 2\d:fts_shutter_20 1\d:fts_shutter_10 0\d.*:fts_shutter_10 set_.*:fts_shutter_updown
attr DEVICE cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
attr DEVICE webCmd :open:close:half:stop:pct
attr DEVICE stateFormat \
online\
\
state
deletereading -q DEVICE (?!associatedWith).*
attr DEVICE setStateList open close half stop pct
attr DEVICE model shelly25_roller_invert_1
# shelly2 using original firmware.
# NOTE: a second device will be created for the second channel
name:shelly2_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly2 using original firmware.
NOTE: a second device will be created for the second channel
order:A_11a
set DEVICE attrTemplate shellyplug
par:DEVNAME;Shelly2 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 readingList shellies/DEVNAME/relay/1:.* state
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE
attr DEVICE_CH2 setList \
off:noArg shellies/DEVNAME/relay/1/command off\
on:noArg shellies/DEVNAME/relay/1/command on
attr DEVICE model shelly2_split
attr DEVICE_CH2 model shelly2_split
# shelly2.5 using original firmware.
# Based on user 87insane contribution in https://forum.fhem.de/index.php/topic,94060.msg962167.html#msg962167
# NOTE: a second device will be created for the second channel
name:shelly25_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly2.5 using original firmware.
NOTE: a second device will be created for the second channel
order:A_11a1
set DEVICE attrTemplate shellyplug
par:DEVNAME;Shelly2 name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2
attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"online","false") eq "true"?"10px-kreis-gruen":"10px-kreis-rot";; my $light = ReadingsVal($name,"state","off");; my $cons = ReadingsVal($name,"relay_0_power","unknown");; my $temp = ReadingsVal($name,"temperature","-100");;""}
attr DEVICE readingList shellies/DEVNAME/relay/0:.* state\
shellies/DEVNAME/relay/0:.* relay_0\
shellies/DEVNAME/input/0:.* input_0\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/relay/0/power:.* relay_0_power\
shellies/DEVNAME/relay/0/energy:.* relay_0_energy\
shellies/DEVNAME/temperature:.* temperature\
shellies/DEVNAME/overtemperature:.* overtemperature\
shellies/DEVNAME/longpush/0:.* longpush_0
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 readingList shellies/DEVNAME/relay/1:.* state\
shellies/DEVNAME/relay/1:.* relay_1\
shellies/DEVNAME/input/1:.* input_1\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/relay/1/power:.* relay_1_power\
shellies/DEVNAME/relay/1/energy:.* relay_1_energy\
shellies/DEVNAME/temperature:.* temperature\
shellies/DEVNAME/overtemperature:.* overtemperature\
shellies/DEVNAME/longpush/1:.* longpush_1
attr DEVICE_CH2 comment Channel 2 for DEVICE
setreading DEVICE_CH2 associatedWith DEVICE
attr DEVICE_CH2 setList \
off:noArg shellies/DEVNAME/relay/1/command off\
on:noArg shellies/DEVNAME/relay/1/command on
attr DEVICE model shelly25_split
# shelly4pro using original firmware
name:shelly4pro_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly4pro using original firmware
NOTE: for each of the second to fourth channel, a new device will be created
order:A_14a1
par:DEVNAME;Shelly4Pro name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate shellyplug
attr DEVICE getList \
power0:noArg shellies/DEVNAME/relay/0/power power0\
energy0:noArg shellies/DEVNAME/relay/0/energy energy0
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
setreading DEVICE associatedWith DEVICE_CH2,DEVICE_CH3,DEVICE_CH4
copy DEVICE DEVICE_CH2
attr DEVICE_CH2 readingList shellies/DEVNAME/relay/1:.* state
setreading DEVICE_CH2 associatedWith DEVICE,DEVICE_CH3,DEVICE_CH4
attr DEVICE_CH2 setList \
off:noArg shellies/DEVNAME/relay/1/command off\
on:noArg shellies/DEVNAME/relay/1/command on
attr DEVICE getList \
power1:noArg shellies/DEVNAME/relay/1/power power1\
energy1:noArg shellies/DEVNAME/relay/1/energy energy1
attr DEVICE comment Channel 2 for DEVICE, see also DEVICE, DEVICE_CH3 and DEVICE_CH4
copy DEVICE DEVICE_CH3
attr DEVICE_CH3 readingList shellies/DEVNAME/relay/2:.* state
setreading DEVICE_CH3 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH4
attr DEVICE_CH3 setList \
off:noArg shellies/DEVNAME/relay/2/command off\
on:noArg shellies/DEVNAME/relay/2/command on
attr DEVICE getList \
power2:noArg shellies/DEVNAME/relay/2/power power2\
energy2:noArg shellies/DDEVNAME/relay/2/energy energy2
attr DEVICE comment Channel 3 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH4
copy DEVICE DEVICE_CH4
attr DEVICE_CH4 readingList shellies/DEVNAME/relay/3:.* state
setreading DEVICE_CH4 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH3
attr DEVICE_CH4 setList \
off:noArg shellies/DEVNAME/relay/3/command off\
on:noArg shellies/DEVNAME/relay/3/command on
attr DEVICE_CH4 getList \
power3:noArg shellies/DEVNAME/relay/3/power power3\
energy3:noArg shellies/DEVNAME/relay/3/energy energy3
attr DEVICE_CH4 comment Channel 4 for DEVICE, see also DEVICE, DEVICE_CH2 and DEVICE_CH3
attr DEVICE model shelly4pro_split
attr DEVICE_CH2 model shelly4pro_split
attr DEVICE_CH3 model shelly4pro_split
attr DEVICE_CH4 model shelly4pro_split
# shelly4pro unified device using original firmware
# source: https://forum.fhem.de/index.php/topic,97218.msg905689.html#msg905689
name:shelly4pro_unified
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly4pro using original firmware
NOTE: UNTESTED! feedback is apreciated, please try also to add toggle commands
NOTE: only one device will be created.
order:A_14b
par:DEVNAME;Shelly4Pro name in the topic;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
set DEVICE attrTemplate shellyplug
attr DEVICE getList \
power0:noArg shellies/DEVNAME/relay/0/power power0\
energy0:noArg shellies/DEVNAME/relay/0/energy energy0\
power1:noArg shellies/DEVNAME/relay/1/power power1\
energy1:noArg shellies/DEVNAME/relay/1/energy energy1\
power2:noArg shellies/DEVNAME/relay/2/power power2\
energy2:noArg shellies/DDEVNAME/relay/2/energy energy2\
power3:noArg shellies/DEVNAME/relay/3/power power3\
energy3:noArg shellies/DEVNAME/relay/3/energy energy3
attr DEVICE readingList \
shellies/DEVNAME/relay/0:.* relay0\
shellies/DEVNAME/input/0:.* input0\
shellies/DEVNAME/relay/1:.* relay1\
shellies/DEVNAME/input/1:.* input1\
shellies/DEVNAME/relay/2:.* relay2\
shellies/DEVNAME/input/2:.* input2\
shellies/DEVNAME/relay/3:.* relay3\
shellies/DEVNAME/input/3:.* input3\
shellies/DEVNAME/online:.* online\
shellies/DEVNAME/announce:.* { json2nameValue($EVENT) }\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }\
shellies/DEVNAME/relay/0/power:.* power0\
shellies/DEVNAME/relay/1/power:.* power1\
shellies/DEVNAME/relay/2/power:.* power2\
shellies/DEVNAME/relay/3/power:.* power3\
shellies/DEVNAME/relay/0/energy:.* energy0\
shellies/DEVNAME/relay/1/energy:.* energy1\
shellies/DEVNAME/relay/2/energy:.* energy2\
shellies/DEVNAME/relay/3/energy:.* energy3
attr DEVICE setList \
relay0:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/0/command $EVTPART1\
relay1:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/1/command $EVTPART1\
relay2:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/2/command $EVTPART1\
relay3:iconSwitch,on,li_wht_off,off,li_wht_on shellies/DEVNAME/relay/3/command $EVTPART1\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE webCmd relay0:relay1:relay2:relay3
attr DEVICE stateFormat R0: relay0 R1: relay1 R2: relay2 R3: relay3
attr DEVICE model shelly4pro_unified
# shellybulb using original firmware
name:shellybulb
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shellybulb using original firmware
Tested with 1.49
order:A_15
par:DEVNAME;name of this shelly;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]+)/, ? $1 : undef }
attr DEVICE setList\
off:noArg shellies/DEVNAME/color/0/command off\
on:noArg shellies/DEVNAME/color/0/command on\
pct:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"gain":"$EVTPART1","brightness":"$EVTPART1"}\
pct_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"turn":"on","gain":"$EVTPART1","brightness":"$EVTPART1"}\
ct:colorpicker,CT,3000,10,6500 {$EVTPART1=3000 if ($EVTPART1<3000);"shellies/DEVNAME/color/0/set {\"mode\":\"white\",\"temp\":\"$EVTPART1\"}"}\
ct_on:colorpicker,CT,3000,10,6500 {$EVTPART1=3000 if ($EVTPART1<3000);"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"white\",\"temp\":\"$EVTPART1\"}"}\
rgb:colorpicker,RGB {$EVTPART1=~/(..)(..)(..)/;if($1 ne $2 || $2 ne $3){"shellies/DEVNAME/color/0/set {\"mode\":\"color\",\"gain\":\"100\",\"red\":".hex($1).",\"green\":".hex($2).",\"blue\":".hex($3)."}"}else{"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"white\",\"brightness\":".int(hex($1)/2.55)."}"}}\
rgb_on:colorpicker,RGB {$EVTPART1=~/(..)(..)(..)/;if($1 ne $2 || $2 ne $3){"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"color\",\"gain\":\"100\",\"red\":".hex($1).",\"green\":".hex($2).",\"blue\":".hex($3)."}"}else{"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"white\",\"brightness\":".int(hex($1)/2.55)."}"}}\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
deletereading -q DEVICE status_.*
attr DEVICE readingList shellies/DEVNAME/color/0/status:.* {json2nameValue($EVENT)}
attr DEVICE userReadings ct:temp.* {ReadingsVal($name,"temp",3000)}, rgb:red.* {if(ReadingsVal($name,"mode","") eq "color"){sprintf("%02X%02X%02X", ReadingsVal($name,"red",99), ReadingsVal($name,"green",99), ReadingsVal($name,"blue",99))}else{my $a=sprintf("%02X",ReadingsVal($name,"brightness",0)*2.555);"$a$a$a"}}
attr DEVICE webCmd on:off:pct:ct:rgb
attr DEVICE genericDeviceType light
attr DEVICE icon light_control
attr DEVICE model shellybulb
# shellyht using original firmware
name:shellyht
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shellyht using original firmware
Just adds stateFormat and icon
order:A_16
attr DEVICE setList \
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
attr DEVICE icon temperature_humidity
attr DEVICE stateFormat T: temperature °C H: humidity % B: battery %
attr DEVICE model shellyht
#shelly2rgbw
# contributed by dkreutz http://forum.fhem.de/index.php/topic,94060.msg944338.html#msg944338
# shellyrgbw2 color mode
name:shelly2rgbw_color
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shellyrgbw2 color mode
Tested with 1.5.0-rgbw2-hotfix1
order:A_17
par:DEVNAME;name of this shelly;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]+)/, ? $1 : undef }
attr DEVICE setList\
off:noArg shellies/DEVNAME/color/0/command off\
on:noArg shellies/DEVNAME/color/0/command on\
white:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"white":"$EVTPART1"}\
gain:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"gain":"$EVTPART1"}\
rgb:colorpicker,RGB {$EVTPART1=~/(..)(..)(..)/;if($1 ne $2 || $2 ne $3) {"shellies/DEVNAME/color/0/set {\"mode\":\"color\",\"red\":".hex($1).",\"green\":".hex($2).",\"blue\":".hex($3)."}"}else{"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"white\",\"brightness\":".int(hex($1)/2.55)."}"}}\
white_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"turn":"on","white":"$EVTPART1"}\
gain_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/color/0/set {"turn":"on","gain":"$EVTPART1"}\
rgb_on:colorpicker,RGB {$EVTPART1=~/(..)(..)(..)/;if($1 ne $2 || $2 ne $3) {"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"color\",\"gain\":\"100\",\"red\":".hex($1).",\"green\":".hex($2).",\"blue\":".hex($3)."}"}else{"shellies/DEVNAME/color/0/set {\"turn\":\"on\",\"mode\":\"white\",\"brightness\":".int(hex($1)/2.55)."}"}}\
effect:select,0,1,2,3 shellies/DEVNAME/color/0/set {"effect":"$EVTPART1"}\
update:noArg shellies/DEVNAME/command update_fw
deletereading -q DEVICE status_.*
attr DEVICE readingList \
shellies/DEVNAME/color/0/status:.* {json2nameValue($EVENT)}\
shellies/DEVNAME/color/0:.* state\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }
attr DEVICE userReadings rgb:red.* {if(ReadingsVal($name,"mode","") eq "color"){sprintf("%02X%02X%02X", ReadingsVal($name,"red",99), ReadingsVal($name,"green",99), ReadingsVal($name,"blue",99))}else{my $a=sprintf("%02X",ReadingsVal($name,"brightness",0)*2.555);"$a$a$a"}}
attr DEVICE webCmd on:off:white:gain:rgb:effect
attr DEVICE setStateList on off
attr DEVICE icon light_control
attr DEVICE devStateIcon {my $onl = ReadingsVal($name,"online","false") eq "true"?"10px-kreis-gruen":"10px-kreis-rot";; my $light = ReadingsVal($name,"state","off");; my $cons = ReadingsVal($name,"power","unknown");; "".FW_makeImage($onl)." ".FW_makeImage($light)."Verbrauch: $cons
"}
attr DEVICE model shelly2rgbw_color
#contributed by user sledge
name:shelly2rgbw_4w_split
filter:TYPE=MQTT2_DEVICE:FILTER=readingList=.*shellies.*
desc:shelly2rgbw configured with 4 white channels, one device for each channel
Tested with v1.4.8
order:A_17a
par:DEVNAME;name of this shelly;{ AttrVal("DEVICE","readingList","") =~ m,shellies/([^/]*)/, ? $1 : undef }
attr DEVICE readingList shellies/DEVNAME/white/0/status:.* {json2nameValue($EVENT)}\
shellies/DEVNAME/white/0:.* state\
shellies/DEVNAME/white/0/set:.* { json2nameValue($EVENT) }\
shellies/DEVNAME/online:.* online\
shellies/announce:.* { $EVENT =~ m,..id...DEVNAME...mac.*, ? json2nameValue($EVENT) : undef }
attr DEVICE setList off:noArg shellies/DEVNAME/white/0/command off\
on:noArg shellies/DEVNAME/white/0/command on\
brightness:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/0/set {"mode":"white","brightness":"$EVTPART1"}\
brightness_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/0/set {"ison":"true","mode":"white","brightness":"$EVTPART1"}\
x_update:noArg shellies/DEVNAME/command update_fw\
x_mqttcom shellies/DEVNAME/command $EVTPART1
deletereading -q DEVICE (?!associatedWith).*
setreading DEVICE associatedWith DEVICE_CH1,DEVICE_CH2,DEVICE_CH4
attr DEVICE webCmd on:off:brightness
attr DEVICE model shelly2rgbw_4w_split
attr DEVICE comment Channel 1 for DEVICE, see also DEVICE_CH2, DEVICE_CH3 and DEVICE_CH4
attr DEVICE icon light_control
attr DEVICE autocreate 0
attr DEVICE setStateList on off
copy DEVICE DEVICE_CH2
setreading DEVICE_CH2 associatedWith DEVICE,DEVICE_CH3,DEVICE_CH4
attr DEVICE_CH2 readingList shellies/DEVNAME/white/1/status:.* {json2nameValue($EVENT)}\
shellies/DEVNAME/white/1:.* state\
shellies/DEVNAME/white/1/set:.* { json2nameValue($EVENT) }\
shellies/DEVNAME/online:.* online
attr DEVICE_CH2 setList off:noArg shellies/DEVNAME/white/1/command off\
on:noArg shellies/DEVNAME/white/1/command on\
brightness:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/1/set {"mode":"white","brightness":"$EVTPART1"}\
brightness_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/1/set {"ison":"true","mode":"white","brightness":"$EVTPART1"}
attr DEVICE_CH2 setStateList on off
copy DEVICE DEVICE_CH3
setreading DEVICE_CH3 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH4
attr DEVICE_CH3 readingList shellies/DEVNAME/white/2/status:.* {json2nameValue($EVENT)}\
shellies/DEVNAME/white/2:.* state\
shellies/DEVNAME/white/2/set:.* { json2nameValue($EVENT) }\
shellies/DEVNAME/online:.* online
attr DEVICE_CH3 setList off:noArg shellies/DEVNAME/white/2/command off\
on:noArg shellies/DEVNAME/white/2/command on\
brightness:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/2/set {"mode":"white","brightness":"$EVTPART1"}\
brightness_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/2/set {"ison":"true","mode":"white","brightness":"$EVTPART1"}
attr DEVICE_CH3 setStateList on off
copy DEVICE DEVICE_CH4
attr DEVICE_CH4 readingList shellies/DEVNAME/white/3/status:.* {json2nameValue($EVENT)}\
shellies/DEVNAME/white/3:.* state\
shellies/DEVNAME/white/3/set:.* { json2nameValue($EVENT) }\
shellies/DEVNAME/online:.* online
attr DEVICE_CH4 setList off:noArg shellies/DEVNAME/white/3/command off\
on:noArg shellies/DEVNAME/white/3/command on\
brightness:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/3/set {"mode":"white","brightness":"$EVTPART1"}\
brightness_on:colorpicker,BRI,0,1,100 shellies/DEVNAME/white/3/set {"ison":"true","mode":"white","brightness":"$EVTPART1"}
setreading DEVICE_CH4 associatedWith DEVICE,DEVICE_CH2,DEVICE_CH3
attr DEVICE_CH4 setStateList on off
###############
#ebusd
#
#ebus daemon device
name:eBus_daemon_splitter
filter:TYPE=MQTT2_DEVICE
desc:Device containing all status messages from the ebus daemon itself
NOTE: acts also as a bridge device to split up the hardware on the bus into different mqtt2_devices
NOTE:
- for use with MQTT2_CLIENT use a copy of the Device with the same clientId than the IO, delete original's readingList after applying the template!
- this might change the devices CID
order:E_01a
par:DEVTYPE;Internal TYPE of the device; { InternalVal("DEVICE","TYPE",undef)}
par:DEV_ID;base topic set ebus;{ AttrVal("DEVICE","readingList","") =~ m,[^:]+:?(ebus[a-zA-Z])[^/]*[/].*:, ? $1 : "ebusd" }
modify DEVICE DEV_ID
attr DEVICE autocreate 1
attr DEVICE bridgeRegexp (ebus..*?)/(bai|\d+|cc|e7f|ehp|f\d\d|hc|he.|hmu|hwc|mc|mc.\d|omu|omu.\d|pms|rcc|rcc.\d|sc|sdr_p|ui|uih|v\d\d|v81.\d|vd\d|vl\d|vr_\d\d|zeo)/.*:.* "$1_$2"\
(ebus..*?)/(global|broadcast|general|scan([^/]*))/.*:.* "$1"
attr DEVICE icon sani_boiler_temp
attr DEVICE userReadings formatedUptime:uptime.* {my $m = ReadingsVal($name,"uptime",0)/60;; return sprintf "0 000 00:%02d", $m if $m < 60;; my $h = $m / 60;; $m %= 60;; return sprintf "0 000 %02d:%02d", $h, $m if $h < 24;; my $d = $h / 24;; $h %= 24;; return sprintf "0 %03d %02d:%02d", $d, $h, $m if $d <365;; my $y = $d / 365;; $d %= 365;; return sprintf "%d %03d %02d:%02d", $y, $d, $h, $m}
attr DEVICE stateFormat Status: \
1:running\
Signal: \
2:signal\
Uptime: formatedUptime
attr DEVICE devStateIcon 1.true:it_net 1.false:it_net@red 2.true:lan_rs485 2.false:lan_rs485@red
attr DEVICE setList getKnown:noArg DEV_ID/list onlyknown\
getAll:noArg DEV_ID/list
set DEVICE getKnown
attr DEVICE model eBus_daemon_splitter
###############
#ESP Milight Hub
#use this with Chris Mullins ESP-Milight-Hub. for further details visit https://github.com/sidoh/esp8266_milight_hub
#recommended structure of the topic pattern milight/:device_id/:device_type/:group_id
#as set in the settings section in the bridge's web interface
#
#The ESP-Milight-Hub bridge device
#Atm there are no furter commands to be set to the esp itself
name:esp_milight_hub_bridge
filter:TYPE=MQTT2_DEVICE
desc:use this with Chris Mullins ESP-Milight-Hub. for further details visit https://github.com/sidoh/esp8266_milight_hub
#recommended structure of the topic pattern milight/:device_id/:device_type/:group_id as set in the settings section in the bridge's web interface.
order:X_01
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/][^/]*at[^/]+[/].*:, ? $1 : undef }
attr DEVICE bridgeRegexp BASE_ID/[^/]*at[^/]+/(0x....)/.*/([0-8])?.*:.* "milight_$1_$2"
attr DEVICE autocreate 1
attr DEVICE setStateList on off
attr DEVICE stateFormat \
status\
Version: \
version
attr DEVICE devStateIcon connected:10px-kreis-gruen disconnected.*:10px-kreis-rot
attr DEVICE model esp_milight_hub_bridge
#rgbw-bulb
name:esp_milight_hub_rgbw_bulb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=milight.*
desc:For use with X_01_esp_milight_hub_bridge
Basic elements to control a rgbw bulb. If you own a different type of bulb, this template could contain more options than your physical device might be able to handle. Just delete, what you don't need or use the full featured version to get extended options and then delete what you don't need...
order:X_011
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*tes/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading -q DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name,"hex",1)}
attr DEVICE webCmd brightness:hue:command
attr DEVICE readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}
attr DEVICE userReadings hex:color_r.* {Color::rgb2hex(ReadingsVal($name,"color_r",255),ReadingsVal($name,"color_g",255),ReadingsVal($name,"color_b",255))}, hue:bulb_mode.*white {"0"}
attr DEVICE setStateList on off
attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
attr DEVICE setExtensionsEvent 1
attr DEVICE model esp_milight_hub_rgbw_bulb
#rgbw-group
name:esp_milight_hub_make_rgbw_group
filter:TYPE=MQTT2_DEVICE:FILTER=CID=milight.*
desc:For use with X_01_esp_milight_hub_bridge
Defines a new device based on the one the template is applied to.
Only basic elements to control a group of rgbw bulbs will be available.
order:X_01a
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*tes/.*:, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
copy DEVICE milight_REMOTE_ID_0
deletereading -q milight_REMOTE_ID_0 .*_.*
attr milight_REMOTE_ID_0 icon light_control
attr milight_REMOTE_ID_0 eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/
attr milight_REMOTE_ID_0 devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr milight_REMOTE_ID_0 webCmd brightness:hue:command
attr milight_REMOTE_ID_0 readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr milight_REMOTE_ID_0 setList\
on BASE_ID/REMOTE_ID/BULB_TYPE/0 {"status":"ON"}\
off BASE_ID/REMOTE_ID/BULB_TYPE/0_ID {"status":"OFF"}\
brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}\
hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}\
command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/0 {"$EVTPART0":"$EVTPART1"}
attr milight_REMOTE_ID_0 setStateList on off
#attr milight_REMOTE_ID_0 userReadings rgb:color_r.* {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
modify milight_REMOTE_ID_0 milight_REMOTE_ID_0
attr milight_REMOTE_ID_0 model esp_milight_hub_make_rgbw_group
#rgbw_cct-bulb
name:esp_milight_hub_rgb_cct_bulb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=milight.*
desc:For use with X_01_esp_milight_hub_bridge
NOTE: Development state is experimental!
Source: Forum
order:X_01a1
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading -q DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
color_temp:colorpicker,CT,153,1,370 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
saturation:colorpicker,BRI,0,1,100 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
#attr DEVICE userReadings rgb:color_r.* {sprintf("%02X%02X%02X", ReadingsVal($name,"color_r",255), ReadingsVal($name,"color_g",255), ReadingsVal($name,"color_b",255))}
attr DEVICE webCmd brightness:dim:hue:command:color_temp:program:saturation:mode
attr DEVICE webCmdLabel brightness:dim\
:hue:command\
:color_temp:program\
:saturation:mode
attr DEVICE setStateList on off
# computed_color will send RGB = 255,255,255 when in white mode. This is useful for HomeAssistant where it always expects the color to be set.
attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
attr DEVICE model esp_milight_hub_rgb_cct_bulb
#cct-only-bulb
name:esp_milight_hub_cct_only_bulb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=milight.*
desc:For use with X_01_esp_milight_hub_bridge
NOTE: Development state is experimental!
simple CCT device
order:X_01b
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading -q DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name)}
attr DEVICE readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setList\
on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
attr DEVICE webCmd brightness:dim:command:program:mode
attr DEVICE webCmdLabel :dim\
:::
attr DEVICE setStateList on off
attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
attr DEVICE model esp_milight_hub_cct_only_bulb
#rgbw-bulb
name:esp_milight_hub_max_features_bulb
filter:TYPE=MQTT2_DEVICE:FILTER=CID=milight.*
desc:For use with X_01_esp_milight_hub_bridge
Device could contain more options than your physical device might be able to handle. Just delete, what you don't need...
NOTE: Development state is experimental!
NOTE: regex not working to extract remote channel... Topic is something like milight/updates/0xABCD/rgbw/0
order:X_01x
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading -q DEVICE .*_.*
attr DEVICE icon light_control
attr DEVICE devStateIcon {zigbee2mqtt_devStateIcon255($name,'hex',1)}
attr DEVICE readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/states/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/0:.* { json2nameValue($EVENT) }
attr DEVICE setExtensionsEvent 1
attr DEVICE setList \
on BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"ON"}\
off BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"status":"OFF"}\
brightness:colorpicker,BRI,0,15,255 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
hue:colorpicker,HUE,0,1,359 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
color_temp:colorpicker,CT,153,1,370 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
saturation:colorpicker,BRI,0,1,100 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
command:uzsuSelectRadio,Weiss,Nacht BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
program:uzsuSelectRadio,Mode,Faster,Slower BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}\
mode:select,0,1,2,3,4,5,6,7,8 BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"$EVTPART0":"$EVTPART1"}\
dim:uzsuSelectRadio,Up,Down BASE_ID/REMOTE_ID/BULB_TYPE/GROUP_ID {"command":"$EVTPART1"}
attr DEVICE userReadings hex:color_r.* {Color::rgb2hex(ReadingsVal($name,"color_r",255),ReadingsVal($name,"color_g",255),ReadingsVal($name,"color_b",255))}, hue:bulb_mode.*white {"0"}
attr DEVICE webCmd on:off:brightness:dim:hue:command:color_temp:program:saturation:mode
attr DEVICE webCmdLabel An:Aus\
:Helligkeit:Dimmen\
:HUE:Command\
:Farb-Temp:Programm\
:Sättigung:Modus
attr DEVICE eventMap /set_white:Weiss/night_mode:Nacht/white_mode:white/on:on/off:off/ON:on/OFF:off/next_mode:Mode/mode_speed_up:Faster/mode_speed_down:Slower/level_up:Up/level_down:Down/
attr DEVICE comment To switch device also on when changing brightness, change payload pattern to {"status":"ON","$EVTPART0":"$EVTPART1"} or add a new element to setList, similar to brightness, e.g.brightness_on and change payload pattern as described.
attr DEVICE model esp_milight_hub_max_features_bulb
#remote for event generation only
name:esp_milight_hub_remote_events_only
filter:TYPE=MQTT2_DEVICE
desc:For use with X_01_esp_milight_hub_bridge
See Forum Thread for examples how to control a MPD, HUEDevice bulbs or shutters by a MiLight remote.
order:X_01y
par:BASE_ID;BASE_ID typically is milight;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/].*ates/.*:, ? $1 : undef }
par:GROUP_ID;number from 0 to 4 representing one of the channels of an original bridge or remote;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([0-4]):, ? $1 : undef }
par:REMOTE_ID;HEX number representing a specific remote or bridge;{ AttrVal("DEVICE","readingList","") =~ m,([^/]+)[/](0x....)[/].*:, ? $2 : undef }
par:BULB_TYPE;rgbw, cct, rgb_cct, rgb, fut089, ;{ AttrVal("DEVICE","readingList","") =~ m,[^/]+[/][^/]+[/][^/]+[/]([^/]+)[/].*:, ? $1 : undef }
deletereading -q DEVICE .*_.*
attr DEVICE readingList \
BASE_ID/states/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { }\
BASE_ID/updates/REMOTE_ID/BULB_TYPE/GROUP_ID:.* { json2nameValue($EVENT) }
attr DEVICE model esp_milight_hub_remote_events_only