################################################################################ # The file is part of the SIGNALduino project # # !!! useful hints !!! # -------------------- # name => ' ' # name of device or group of all devices # comment => ' ' # exact description or example of devices # id => ' ' # number of the protocol definition, each number only once use (accepted no .) # knownFreqs => ' ' # known receiver frequency 433.92 | 868.35 (some sensor families or remote send on more frequencies) # # Time for one, zero, start, sync, float and pause are calculated by clockabs * value = result in microseconds, positive value stands for high signal, negative value stands for low signal # clockrange => [ , ] # only MC signals | min , max of pulse / pause times in microseconds # clockabs => ' ' # only MU + MS signals | value for calculation of pulse / pause times in microseconds # clockabs => '-1' # only MS signals | value pulse / pause times is automatically # one => [ , ] # only MU + MS signals | value pair for a one bit, must be always a positive and negative factor of clockabs (accepted . | example 1.5) # zero => [ , ] # only MU + MS signals | value pair for a zero bit, must be always a positive and negative factor of clockabs (accepted . | example -1.5) # start => [ , ] # only MU - value pair or more for start message # preSync => [ , ] # only MU + MS - value pair or more for preamble pulse of signal # sync => [ , ] # only MS - value pair or more for sync pulse of signal # float => [ , ] # only MU + MS signals | Convert 0F -> 01 (F) to be compatible with CUL # pause => [ ] # delay when sending between two signals (clockabs * pause must be < 32768 # # length_min => ' ' # minimum number of bits of message length # length_max => ' ' # maximum number of bits of message length # paddingbits => ' ' # pad up to x bits before call module, default is 4. # paddingbits => '1' # will disable padding, use this setting when using dispatchBin # paddingbits => '2' # is padded to an even number, that is a maximum of 1 bit # remove_zero => 1 # removes leading zeros from output # # developId => 'm' # logical module is under development # developId => 'p' # protocol is under development or to reserve IDs, the ID in the development attribute with developId => 'p' are only used without the other entries # developId => 'y' # protocol is under development, all IDs in the development attribute with developId => 'y' are used # # preamble => ' ' # prepend to converted message # preamble => 'u..' # message is unknown and without module, forwarding SIGNALduino_un or FHEM DOIF # preamble => 'U..' # message can be unknown and without module, no forwarding SIGNALduino_un but forwarding can FHEM DOIF # postamble => ' ' # appends a string to the demodulated signal # # clientmodule => ' ' # FHEM module for processing # filterfunc => ' ' # SIGNALduino_filterSign | SIGNALduino_compPattern --> SIGNALduino internal filter function, it remove the sign from the pattern, and compress message and pattern # # SIGNALduino_filterMC --> SIGNALduino internal filter function, it will decode MU data via Manchester encoding # dispatchBin => 1, # If set to 1, data will be dispatched in binary representation to other logcial modules. # If not set (default) or set to 0, data will be dispatched in hex mode to other logical modules. # postDemodulation => \& # only MU - SIGNALduino internal sub for processing before dispatching to a logical module # method => \& # call to process this message # format => ' ' # twostate | pwm | manchester --> modulation type of the signal, only manchester use SIGNALduino internal, other types only comment # modulematch => ' ' # RegEx on the exact message including preamble | if defined, it will be evaluated # polarity => 'invert' # only MC signals | invert bits of the signal # ##### notice #### or #### info ############################################################################################################ # !!! Between the keys and values ​​no tabs not equal to a width of 8 or please use spaces !!! # !!! Please use first unused id for new protocols !!! # ID´s are currently unused: 20 | 38 | 68 # ID´s need to be revised (preamble u): 5|6|19|20|21|22|23|24|25|26|27|28|31|36|40|42|52|56|59|63|78|87|88 ########################################################################################################################################### # Please provide at least three messages for each new MU/MC/MS protocol and a URL of issue in GitHub or discussion in FHEM Forum # https://forum.fhem.de/index.php/topic,58396.975.html | https://github.com/RFD-FHEM/RFFHEM ########################################################################################################################################### ( "0" => ## various weather sensors (500 | 9100) # CUL_TCM97001 Typ - Prologue # MS;P0=-4152;P1=643;P2=-2068;P3=-9066;D=1310121210121212101210101212121212121212121212121010121012121212121012101212;CP=1;SP=3;R=220;O;m2; # MS;P0=-4149;P2=-9098;P3=628;P4=-2076;D=3230343430343434303430303434343434343434343434343030343030343434343034303434;CP=3;SP=2;R=218;O;m2; # CUL_TCM97001 Typ - AURIOL / Mebus / TCM... # MS;P0=-9298;P1=495;P2=-1980;P3=-4239;D=1012121312131313121313121312121212121212131212131312131212;CP=1;SP=0;R=223;O;m2; { name => 'weather (v1)', comment => 'temperature / humidity or other sensors', id => '0', knownFreqs => '433.92', one => [1,-7], zero => [1,-3], sync => [1,-16], clockabs => -1, format => 'twostate', # not used now preamble => 's', # prepend to converted message postamble => '00', # Append to converted message clientmodule => 'CUL_TCM97001', #modulematch => '^s[A-Fa-f0-9]+', length_min => '24', length_max => '40', paddingbits => '8', # pad up to 8 bits, default is 4 }, "0.1" => ## other Sensors (380 | 9650) # CUL_TCM97001 Typ - AURIOL | Mebus # MS;P1=416;P2=-9618;P3=-4610;P4=-2036;D=1213141313131313141313141314141414141414141313141314131414;CP=1;SP=2;R=220;O;m0; # MS;P1=397;P2=-2033;P3=-4627;P4=-9630;D=1413121313131313121313121312121212121212121313121312131212;CP=1;SP=4;R=221; # MS;P0=-9690;P3=354;P4=-4662;P5=-2107;D=3034343434343535343534343435353535353535353434353535343535;CP=3;SP=0;R=209;O;m2; ## LIDL Wetterstation # https://github.com/RFD-FHEM/RFFHEM/issues/63 # MS;P1=367;P2=-2077;P4=-9415;P5=-4014;D=141515151515151515121512121212121212121212121212121212121212121212;CP=1;SP=4;O; { name => 'weather (v2)', comment => 'temperature / humidity or other sensors', id => '0.1', knownFreqs => '433.92', one => [1,-12], zero => [1,-6], sync => [1,-26], clockabs => -1, format => 'twostate', # not used now preamble => 's', # prepend to converted message postamble => '00', # Append to converted message clientmodule => 'CUL_TCM97001', #modulematch => '^s[A-Fa-f0-9]+', length_min => '24', length_max => '32', paddingbits => '8', }, "0.2" => ## other Sensors | for sensors how tol is runaway (260+tol | 9650) # MS;P1=-2140;P2=309;P3=-4690;P4=-9695;D=2421232323232121232123232321212121212121212123212121232121;CP=2;SP=4;R=211;m1; # MS;P0=-9703;P1=304;P2=-2133;P3=-4689;D=1012131312131212131213131312121212121212121212131312131212;CP=1;SP=0;R=208; # MS;P0=138;P1=-2140;P2=315;P3=-9704;P4=-4713;P5=234;D=2321212421242454210424212421512121215121512124212121542121;CP=2;SP=3;R=210; { name => 'weather (v3)', comment => 'temperature / humidity or other sensors', id => '0.2', knownFreqs => '433.92', one => [1,-18], zero => [1,-9], sync => [1,-37], clockabs => -1, format => 'twostate', # not used now preamble => 's', # prepend to converted message postamble => '00', # Append to converted message clientmodule => 'CUL_TCM97001', #modulematch => '^s[A-Fa-f0-9]+', length_min => '24', length_max => '32', paddingbits => '8', }, "0.3" => ## Pollin PFR-130 # CUL_TCM97001 Typ - AURIOL | W174 # MS;P0=-3890;P1=386;P2=-2191;P3=-8184;D=1312121212121012121212121012121212101012101010121012121210121210101210101012;CP=1;SP=3;R=20;O; # MS;P0=-2189;P1=371;P2=-3901;P3=-8158;D=1310101010101210101010101210101010121210121212101210101012101012121012121210;CP=1;SP=3;R=20;O; # Ventus W174 # MS;P3=-2009;P4=479;P5=-9066;P6=-4047;D=45434343464343434643464643464643434643464646434346464343434343434346464643;CP=4;SP=5;R=55;O;m2; { name => 'weather (v4)', comment => 'temperature / humidity or other sensors | Pollin PFR-130, Ventus W174 ...', id => '0.3', knownFreqs => '433.92', one => [1,-10], zero => [1,-5], sync => [1,-21], clockabs => -1, preamble => 's', # prepend to converted message postamble => '00', # Append to converted message clientmodule => 'CUL_TCM97001', length_min => '36', length_max => '42', paddingbits => '8', # pad up to 8 bits, default is 4 }, "0.4" => ## Auriol Z31092 (450 | 9200) # CUL_TCM97001 Typ - AURIOL # MS;P0=443;P3=-9169;P4=-1993;P5=-3954;D=030405040505050505050404040404040404040505050504050405050504040405;CP=0;SP=3;R=14;O;m0; # MS;P0=-9102;P1=446;P2=-3956;P3=-2008;D=10121312121212121312131213131313131313131212121313121213121213121314;CP=1;SP=0;R=212;O;m2; { name => 'weather (v5)', comment => 'temperature / humidity or other sensors | Auriol Z31092', id => '0.4', knownFreqs => '433.92', one => [1,-9], zero => [1,-4], sync => [1,-20], clockabs => 450, preamble => 's', # prepend to converted message postamble => '00', # Append to converted message clientmodule => 'CUL_TCM97001', length_min => '32', length_max => '36', paddingbits => '8', # pad up to 8 bits, default is 4 }, "1" => ## Conrad RSL # MS;P1=1138;P2=-723;P3=583;P4=-1285;P5=-7166;D=351234341234341212341212123412343412341234341234343434343434343434;CP=3;SP=5;R=247;O;m2; # MS;P1=1154;P2=-697;P3=559;P4=-1303;P5=-7173;D=351234341234341212341212123412343412341234341234343434343434343434;CP=3;SP=5;R=247;O; # MS;P0=561;P1=-1291;P2=-7158;P3=1174;P4=-688;D=023401013401013434013434340134010134013401013401010101010101010101;CP=0;SP=2;R=248;m1; { name => 'Conrad RSL v1', comment => 'remotes and switches', id => '1', knownFreqs => '', one => [2,-1], zero => [1,-2], sync => [1,-12], clockabs => '560', format => 'twostate', # not used now preamble => 'P1#', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'SD_RSL', modulematch => '^P1#[A-Fa-f0-9]{8}', length_min => '20', # 23 | userMSG 32 ? length_max => '40', # 24 | userMSG 32 ? }, "2" => ## Self build arduino sensor { name => 'Arduino', comment => 'self build arduino sensor (developModule. SD_AS module only in github)', developId => 'm', id => '2', knownFreqs => '', one => [1,-2], zero => [1,-1], sync => [1,-20], clockabs => '500', format => 'twostate', preamble => 'P2#', # prepend to converted message clientmodule => 'SD_AS', modulematch => '^P2#.{7,8}', length_min => '32', length_max => '34', # Don't know maximal lenth of a valid message paddingbits => '8', # pad up to 8 bits, default is 4 }, "3" => ## itv1 - remote like WOFI Lamp | Intertek Modell 1946518 // ELRO # need more Device Infos / User Message { name => 'itv1', comment => 'remote for WOFI | Intertek', id => '3', knownFreqs => '', one => [3,-1], zero => [1,-3], #float => [-1,3], # not full supported now later use sync => [1,-31], clockabs => -1, # -1=auto format => 'twostate', # not used now preamble => 'i', clientmodule => 'IT', modulematch => '^i......', length_min => '24', length_max => '24', # Don't know maximal lenth of a valid message }, "3.1" => ## itv1_sync40 | Intertek Modell 1946518 // ELRO # MS;P0=-11440;P1=-1121;P2=-416;P5=309;P6=1017;D=150516251515162516251625162516251515151516251625151;CP=5;SP=0;R=66; # MS;P1=309;P2=-1130;P3=1011;P4=-429;P5=-11466;D=15123412121234123412141214121412141212123412341234;CP=1;SP=5;R=38; Gruppentaste, siehe Kommentar in sub SIGNALduino_bit2itv1 # need more Device Infos / User Message { name => 'itv1_sync40', comment => 'IT remote control PAR 1000, ITS-150, AB440R', id => '3', knownFreqs => '', one => [3.5,-1], zero => [1,-3.8], float => [1,-1], # fuer Gruppentaste (nur bei ITS-150,ITR-3500 und ITR-300), siehe Kommentar in sub SIGNALduino_bit2itv1 sync => [1,-44], clockabs => -1, # -1=auto format => 'twostate', # not used now preamble => 'i', clientmodule => 'IT', modulematch => '^i......', length_min => '24', length_max => '24', # Don't know maximal lenth of a valid message postDemodulation => \&SIGNALduino_bit2itv1, }, "4" => ## arctech2 # need more Device Infos / User Message { name => 'arctech2', id => '4', knownFreqs => '', #one => [1,-5,1,-1], #zero => [1,-1,1,-5], one => [1,-5], zero => [1,-1], #float => [-1,3], # not full supported now, for later use sync => [1,-14], clockabs => -1, # -1 = auto format => 'twostate', # tristate can't be migrated from bin into hex! preamble => 'i', # Append to converted message postamble => '00', # Append to converted message clientmodule => 'IT', modulematch => '^i......', length_min => '39', length_max => '44', # Don't know maximal lenth of a valid message }, "5" => # Unitec, Modellnummer 6899/45108 # https://github.com/RFD-FHEM/RFFHEM/pull/389#discussion_r237232347 | https://github.com/RFD-FHEM/RFFHEM/pull/389#discussion_r237245943 # MU;P0=-31960;P1=660;P2=401;P3=-1749;P5=276;D=232353232323232323232323232353535353232323535353535353535353535010;CP=5;R=38; # MU;P0=-1757;P1=124;P2=218;P3=282;P5=-31972;P6=644;P7=-9624;D=010201020303030202030303020303030202020202020203030303035670;CP=2;R=32; # MU;P0=-1850;P1=172;P3=-136;P5=468;P6=236;D=010101010101310506010101010101010101010101010101010101010;CP=1;R=30; # A AN: # MU;P0=132;P1=-4680;P2=508;P3=-1775;P4=287;P6=192;D=123434343434343634343436363434343636343434363634343036363434343;CP=4;R=2; # A AUS: # MU;P0=-1692;P1=132;P2=194;P4=355;P5=474;P7=-31892;D=010202040505050505050404040404040404040470;CP=4;R=27; { name => 'Unitec', comment => 'remote control model 6899/45108', id => '5', knownFreqs => '', one => [3,-1], # ? zero => [1,-3], # ? clockabs => 500, # ? developId => 'y', format => 'twostate', preamble => 'u5#', #clientmodule => '', #modulematch => '', length_min => '24', # ? length_max => '24', # ? }, "6" => ## Eurochron Protocol # MS;P1=-7982;P2=262;P3=-1949;P4=-948;D=21232423232424242324242424242424242424232424232323242424242424232424242324;CP=2;SP=1;R=249;O;m2; # MS;P0=254;P1=-7990;P2=-1935;P3=-950;D=01020302020303030203030303030303030303020302030203030303030303020303030203;CP=0;SP=1;R=248;O;m2; { name => 'weather', comment => 'unknown sensor is under development', id => '6', knownFreqs => '', one => [1,-10], zero => [1,-5], sync => [1,-36], # This special device has no sync clockabs => 220, # -1 = auto format => 'twostate', # tristate can't be migrated from bin into hex! preamble => 'u6#', # Append to converted message #clientmodule => '', #modulematch => '^u......', length_min => '24', #length_max => '36', # missing }, "7" => ## weather sensors like EAS800z # MS;P1=-3882;P2=504;P3=-957;P4=-1949;D=21232424232323242423232323232323232424232323242423242424242323232324232424;CP=2;SP=1;R=249;m=2; { name => 'weather', comment => 'EAS800z, FreeTec NC-7344, HAMA TS34A', id => '7', knownFreqs => '433.92', one => [1,-4], zero => [1,-2], sync => [1,-8], clockabs => 484, format => 'twostate', preamble => 'P7#', # prepend to converted message clientmodule => 'SD_WS07', modulematch => '^P7#.{6}F.{2}', length_min => '35', length_max => '40', }, "8" => ## TX3 (ITTX) Protocol # MU;P0=-1046;P1=1339;P2=524;P3=-28696;D=010201010101010202010101010202010202020102010101020101010202020102010101010202310101010201020101010101020201010101020201020202010201010102010101020202010201010101020;CP=2;R=4; { name => 'TX3 Protocol', id => '8', knownFreqs => '', one => [1,-2], zero => [2,-2], #sync => [1,-8], # clockabs => 470, format => 'pwm', # preamble => 'TX', # prepend to converted message clientmodule => 'CUL_TX', modulematch => '^TX......', length_min => '43', length_max => '44', remove_zero => 1, # Removes leading zeros from output }, "9" => ## Funk Wetterstation CTW600 { name => 'CTW 600', comment => 'FunkWS WH1080/WH3080/CTW600', id => '9', knownFreqs => '', zero => [3,-2], one => [1,-2], #float => [-1,3], # not full supported now, for later use #sync => [1,-8], # clockabs => 480, # -1 = auto undef=noclock format => 'pwm', # tristate can't be migrated from bin into hex! preamble => 'P9#', # prepend to converted message clientmodule => 'SD_WS09', #modulematch => '^u9#.....', length_min => '60', length_max => '120', }, "10" => ## Oregon Scientific 2 { name => 'Oregon Scientific v2|v3', comment => 'temperature / humidity or other sensors', id => '10', knownFreqs => '', clockrange => [300,520], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! clientmodule => 'OREGON', modulematch => '^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*', length_min => '64', length_max => '220', method => \&SIGNALduino_OSV2, # Call to process this message polarity => 'invert', }, "11" => ## Arduino Sensor { name => 'Arduino', comment => 'for Arduino based sensors', id => '11', knownFreqs => '', clockrange => [380,425], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! preamble => 'P2#', # prepend to converted message clientmodule => 'SD_AS', modulematch => '^P2#.{7,8}', length_min => '52', length_max => '56', method => \&SIGNALduino_AS # Call to process this message }, "12" => ## Hideki # MC;LL=-1040;LH=904;SL=-542;SH=426;D=A8C233B53A3E0A0783;C=485;L=72;R=213; { name => 'Hideki', comment => 'temperature / humidity or other sensors', id => '12', knownFreqs => '433.92', clockrange => [420,510], # min, max better for Bresser Sensors, OK for hideki/Hideki/TFA too format => 'manchester', preamble => 'P12#', # prepend to converted message clientmodule => 'hideki', modulematch => '^P12#75.+', length_min => '71', length_max => '128', method => \&SIGNALduino_Hideki, # Call to process this message #polarity => 'invert', }, "13" => ## FLAMINGO FA21 # https://github.com/RFD-FHEM/RFFHEM/issues/21 # https://github.com/RFD-FHEM/RFFHEM/issues/233 # MS;P0=-1413;P1=757;P2=-2779;P3=-16079;P4=8093;P5=-954;D=1345121210101212101210101012121012121210121210101010;CP=1;SP=3;R=33;O; { name => 'FLAMINGO FA21', comment => 'FLAMINGO FA21 smoke detector (message decode as MS)', id => '13', knownFreqs => '433.92', one => [1,-2], zero => [1,-4], sync => [1,-20,10,-1], clockabs => 800, format => 'twostate', preamble => 'P13#', # prepend to converted message clientmodule => 'FLAMINGO', #modulematch => 'P13#.*', length_min => '24', length_max => '26', }, "13.1" => ## FLAMINGO FA20RF # MU;P0=-1384;P1=815;P2=-2725;P3=-20001;P4=8159;P5=-891;D=01010121212121010101210101345101210101210101212101010101012121212101010121010134510121010121010121210101010101212121210101012101013451012101012101012121010101010121212121010101210101345101210101210101212101010101012121212101010121010134510121010121010121;CP=1;O; # MU;P0=-17201;P1=112;P2=-1419;P3=-28056;P4=8092;P5=-942;P6=777;P7=-2755;D=12134567676762626762626762626767676762626762626267626260456767676262676262676262676767676262676262626762626045676767626267626267626267676767626267626262676262604567676762626762626762626767676762626762626267626260456767676262676262676262676767676262676262;CP=6;O; ## FLAMINGO FA22RF (only MU Message) # MU;P0=-5684;P1=8149;P2=-887;P3=798;P4=-1393;P5=-2746;P6=-19956;D=0123434353534353434343434343435343534343534353534353612343435353435343434343434343534353434353435353435361234343535343534343434343434353435343435343535343536123434353534353434343434343435343534343534353534353612343435353435343434343434343534353434353435;CP=3;R=0; # Times measured # Sync 8100 microSec, 900 microSec | Bit1 2700 microSec low - 800 microSec high | Bit0 1400 microSec low - 800 microSec high | Pause Repeat 20000 microSec | 1 Sync + 24Bit, Totaltime 65550 microSec without Sync { name => 'FLAMINGO FA22RF / FA21RF / LM-101LD', comment => 'FLAMINGO | Unitec smoke detector (message decode as MU)', id => '13.1', knownFreqs => '433.92', one => [1,-1.8], zero => [1,-3.5], start => [10,-1], pause => [-25], clockabs => 800, format => 'twostate', preamble => 'P13.1#', # prepend to converted message clientmodule => 'FLAMINGO', #modulematch => '^P13\.?1?#[A-Fa-f0-9]+', length_min => '24', length_max => '24', }, "13.2" => ## LM-101LD Rauchm # MS;P1=-2708;P2=796;P3=-1387;P4=-8477;P5=8136;P6=-904;D=2456212321212323232321212121212121212123212321212121;CP=2;SP=4; { name => 'LM-101LD', comment => 'Unitec smoke detector (message decode as MS)', id => '13', knownFreqs => '433.92', zero => [1,-1.8], one => [1,-3.5], sync => [1,-11,10,-1.2], clockabs => 790, format => 'twostate', preamble => 'P13#', # prepend to converted message clientmodule => 'FLAMINGO', #modulematch => '', length_min => '24', length_max => '24', }, "14" => ## LED X-MAS Chilitec model 22640 # https://github.com/RFD-FHEM/RFFHEM/issues/421 | https://forum.fhem.de/index.php/topic,94211.msg869214.html#msg869214 # MS;P0=988;P1=-384;P2=346;P3=-1026;P4=-4923;D=240123012301230123012323232323232301232323;CP=2;SP=4;R=0;O;m=1; # MS;P0=-398;P1=974;P3=338;P4=-1034;P6=-4939;D=361034103410341034103434343434343410103434;CP=3;SP=6;R=0; { name => 'LED X-MAS', comment => 'Chilitec model 22640', id => '14', knownFreqs => '433.92', one => [3,-1], zero => [1,-3], sync => [1,-14], clockabs => 350, format => 'twostate', preamble => 'P14#', # prepend to converted message clientmodule => 'SD_UT', #modulematch => '^P14#.*', length_min => '20', length_max => '20', }, "15" => ## TCM 234759 { name => 'TCM 234759 Bell', comment => 'wireless doorbell TCM 234759 Tchibo', id => '15', knownFreqs => '', one => [1,-1], zero => [1,-2], sync => [1,-45], clockabs => 700, format => 'twostate', preamble => 'P15#', # prepend to converted message clientmodule => 'SD_BELL', modulematch => '^P15#.*', length_min => '10', length_max => '20', }, "16" => ## Rohrmotor24 und andere Funk Rolladen / Markisen Motoren # ! same definition how ID 72 ! # https://forum.fhem.de/index.php/topic,49523.0.html # MU;P0=-1608;P1=-785;P2=288;P3=650;P4=-419;P5=4676;D=1212121213434212134213434212121343434212121213421213434212134345021213434213434342121212121343421213421343421212134343421212121342121343421213432;CP=2; # MU;P0=-1562;P1=-411;P2=297;P3=-773;P4=668;P5=4754;D=1232341234141234141234141414123414123232341232341412323414150234123234123232323232323234123414123414123414141412341412323234123234141232341415023412323412323232323232323412341412341412341414141234141232323412323414123234142;CP=2; { name => 'Dooya', comment => 'Rohrmotor24 and other radio shutters / awnings motors', id => '16', knownFreqs => '', one => [2,-1], zero => [1,-3], start => [17,-5], clockabs => 280, format => 'twostate', preamble => 'P16#', # prepend to converted message clientmodule => 'Dooya', #modulematch => '', length_min => '39', length_max => '40', }, "17" => ## arctech / intertechno # need more Device Infos / User Message { name => 'arctech / Intertechno', id => '17', knownFreqs => '', one => [1,-5,1,-1], zero => [1,-1,1,-5], #one => [1,-5], #zero => [1,-1], sync => [1,-10], float => [1,-1,1,-1], end => [1,-40], clockabs => -1, # -1 = auto format => 'twostate', # tristate can't be migrated from bin into hex! preamble => 'i', # Append to converted message postamble => '00', # Append to converted message clientmodule => 'IT', modulematch => '^i......', length_min => '32', length_max => '34', # Don't know maximal lenth of a valid message postDemodulation => \&SIGNALduino_bit2Arctec, }, "17.1" => ## intertechno --> MU anstatt sonst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https://www.sweetpi.de/blog/329/ein-ueberblick-ueber-433mhz-funksteckdosen-und-deren-protokolle { name => 'Intertechno', comment => 'PIR-1000 | ITT-1500', id => '17.1', knownFreqs => '433.92', one => [1,-5,1,-1], zero => [1,-1,1,-5], clockabs => 230, # -1 = auto format => 'twostate', # tristate can't be migrated from bin into hex! preamble => 'i', # Append to converted message postamble => '00', # Append to converted message clientmodule => 'IT', modulematch => '^i......', length_min => '32', length_max => '34', # Don't know maximal lenth of a valid message postDemodulation => \&SIGNALduino_bit2Arctec, }, "18" => ## Oregon Scientific v1 # MC;LL=-2721;LH=3139;SL=-1246;SH=1677;D=1A51FF47;C=1463;L=32;R=12; { name => 'Oregon Scientific v1', comment => 'temperature / humidity or other sensors', id => '18', knownFreqs => '', clockrange => [1400,1500], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! preamble => '', clientmodule => 'OREGON', modulematch => '^[0-9A-F].*', length_min => '32', length_max => '32', polarity => 'invert', # invert bits method => \&SIGNALduino_OSV1 # Call to process this message }, "19" => ## minify Funksteckdose # https://github.com/RFD-FHEM/RFFHEM/issues/114 # MU;P0=293;P1=-887;P2=-312;P6=-1900;P7=872;D=6727272010101720172720101720172010172727272720;CP=0; # MU;P0=9078;P1=-308;P2=180;P3=-835;P4=881;P5=309;P6=-1316;D=0123414141535353415341415353415341535341414141415603;CP=5; { name => 'minify', comment => 'remote control RC202', id => '19', knownFreqs => '', one => [3,-1], zero => [1,-3], clockabs => 300, format => 'twostate', preamble => 'u19#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '19', length_max => '23', # not confirmed, length one more as MU Message }, # "20" => ## Livolo # # https://github.com/RFD-FHEM/RFFHEM/issues/29 # # MU;P0=-195;P1=151;P2=475;P3=-333;D=0101010101 02 01010101010101310101310101010101310101 02 01010101010101010101010101010101010101 02 01010101010101010101010101010101010101 02 010101010101013101013101;CP=1; # # # # protocol sends 24 to 47 pulses per message. # # First pulse is the header and is 595 μs long. All subsequent pulses are either 170 μs (short pulse) or 340 μs (long pulse) long. # # Two subsequent short pulses correspond to bit 0, one long pulse corresponds to bit 1. There is no footer. The message is repeated for about 1 second. # # _____________ ___ _______ # # Start bit: | |___| bit 0: | |___| bit 1: | |___| # { # name => 'Livolo', # comment => 'remote control / dimmmer / switch ...', # id => '20', # knownFreqs => '', # one => [3], # zero => [1], # start => [5], # clockabs => 110, #can be 90-140 # format => 'twostate', # preamble => 'u20#', # prepend to converted message # #clientmodule => '', # #modulematch => '', # length_min => '16', # #length_max => '', # missing # filterfunc => 'SIGNALduino_filterSign', # }, "21" => ## Einhell Garagentor # https://forum.fhem.de/index.php?topic=42373.0 | user have no RAWMSG # static adress: Bit 1-28 | channel remote Bit 29-32 | repeats 31 | pause 20 ms # Channelvalues dez # 1 left 1x kurz | 2 left 2x kurz | 3 left 3x kurz | 5 right 1x kurz | 6 right 2x kurz | 7 right 3x kurz ... gedrückt { name => 'Einhell Garagedoor', comment => 'remote control ISC HS 434/6', id => '21', knownFreqs => '', one => [-3,1], zero => [-1,3], #sync => [-50,1], start => [-50,1], clockabs => 400, #ca 400us format => 'twostate', preamble => 'u21#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '32', length_max => '32', paddingbits => '1', # This will disable padding }, "22" => ## HAMULiGHT LED Trafo # https://forum.fhem.de/index.php?topic=89301.0 # MU;P0=-589;P1=209;P2=-336;P3=32001;P4=-204;P5=1194;P6=-1200;P7=602;D=0123414145610747474101010101074741010747410741074101010101074741010741074741414141456107474741010101010747410107474107410741010101010747410107410747414141414561074747410101010107474101074741074107410101010107474101074107474141414145610747474101010101074;CP=1;R=25; # MU;P0=204;P1=-596;P2=598;P3=-206;P4=1199;P5=-1197;D=0123230123012301010101012323010123012323030303034501232323010101010123230101232301230123010101010123230101230123230303030345012323230101010101232301012323012301230101010101232301012301232303030303450123232301010101012323010123230123012301010101012323010;CP=0;R=25; { name => 'HAMULiGHT', comment => 'remote control for LED Transformator', id => '22', knownFreqs => '433.92', one => [1,-3], zero => [3,-1], start => [6,-6], clockabs => 200, # ca 200us format => 'twostate', preamble => 'u22#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '32', length_max => '32', }, "23" => ## Pearl Sensor { name => 'Pearl', comment => 'unknown sensortyp', id => '23', knownFreqs => '', one => [1,-6], zero => [1,-1], sync => [1,-50], clockabs => 200, #ca 200us format => 'twostate', preamble => 'u23#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '36', length_max => '44', }, "24" => ## visivon # https://github.com/RFD-FHEM/RFFHEM/issues/39 # MU;P0=132;P1=500;P2=-233;P3=-598;P4=-980;P5=4526;D=012120303030303120303030453120303121212121203121212121203121212121212030303030312030312031203030303030312031203031212120303030303120303030453120303121212121203121212121203121212121212030303030312030312031203030303030312031203031212120303030;CP=0;O; { name => 'visivon remote', id => '24', knownFreqs => '', one => [3,-2], zero => [1,-5], #one => [3,-2], #zero => [1,-1], start => [30,-5], clockabs => 150, #ca 150us format => 'twostate', preamble => 'u24#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '54', length_max => '58', }, "25" => ## LES remote for led lamp # https://github.com/RFD-FHEM/RFFHEM/issues/40 # MS;P0=-376;P1=697;P2=-726;P3=322;P4=-13188;P5=-15982;D=3530123010101230123230123010101010101232301230123234301230101012301232301230101010101012323012301232;CP=3;SP=5;O; { name => 'les led remote', id => '25', knownFreqs => '', one => [-2,1], zero => [-1,2], sync => [-46,1], # this is a end marker, but we use this as a start marker clockabs => 350, #ca 350us format => 'twostate', preamble => 'u25#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '24', length_max => '50', # message has only 24 bit, but we get more than one message, calculation has to be corrected }, "26" => ## some remote code send by flamingo style remote controls # https://forum.fhem.de/index.php/topic,43292.msg352982.html#msg352982 # MU;P0=1086;P1=-433;P2=327;P3=-1194;P4=-2318;P5=2988;D=01012323010123010101230123012323232323010101232324010123230101230101012301230123232323230101012323240101232301012301010123012301232323232301010123232401012323010123010101230123012323232323010101232353;CP=2; { name => 'remote', id => '26', knownFreqs => '', one => [1,-3], zero => [3,-1], # sync => [1,-6], # Message is not provided as MS, due to small fact start => [1,-6], # Message is not provided as MS, due to small fact clockabs => 380, #ca 380 format => 'twostate', preamble => 'u26#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '24', length_max => '24', # message has only 24 bit, but we get more than one message, calculation has to be corrected }, "27" => ## some remote code, send by flamingo style remote controls # https://forum.fhem.de/index.php/topic,43292.msg352982.html#msg352982 # MU;P0=963;P1=-559;P2=393;P3=-1134;P4=2990;P5=-7172;D=01012323010123010101230123012323232323010101232345010123230101230101012301230123232323230101012323450101232301012301010123012301232323232301010123234501012323010123010101230123012323232323010101232323;CP=2; { name => 'remote', id => '27', knownFreqs => '', one => [1,-2], zero => [2,-1], start => [6,-15], # Message is not provided as MS, worakround is start clockabs => 480, #ca 480 format => 'twostate', preamble => 'u27#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '24', length_max => '24', }, "28" => ## some remote code, send by aldi IC Ledspots { name => 'IC Ledspot', id => '28', knownFreqs => '', one => [1,-1], zero => [1,-2], start => [4,-5], clockabs => 600, #ca 600 format => 'twostate', preamble => 'u28#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '8', length_max => '8', }, "29" => ## example remote control with HT12E chip # MU;P0=250;P1=-492;P2=166;P3=-255;P4=491;P5=-8588;D=052121212121234121212121234521212121212341212121212345212121212123412121212123452121212121234121212121234;CP=0; # https://forum.fhem.de/index.php/topic,58397.960.html { name => 'HT12e', comment => 'remote control for example Westinghouse airfan with 5 buttons', id => '29', knownFreqs => '', one => [-2,1], zero => [-1,2], start => [-35,1], # Message is not provided as MS, worakround is start clockabs => 235, # ca 220 format => 'twostate', # there is a pause puls between words preamble => 'P29#', # prepend to converted message clientmodule => 'SD_UT', modulematch => '^P29#.{3}', length_min => '12', length_max => '12', }, "30" => ## a unitec remote door reed switch # https://forum.fhem.de/index.php?topic=43346.0 # MU;P0=-10026;P1=-924;P2=309;P3=-688;P4=-361;P5=637;D=123245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023240;CP=2;O; # MU;P0=307;P1=-10027;P2=-691;P3=-365;P4=635;D=0102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201;CP=0; { name => 'diverse', comment => 'remote control unitec | door reed switch 47031', id => '30', knownFreqs => '', one => [-2,1], zero => [-1,2], start => [-30,1], # Message is not provided as MS, worakround is start clockabs => 330, # ca 300 us format => 'twostate', # there is a pause puls between words preamble => 'P30#', # prepend to converted message clientmodule => 'SD_UT', modulematch => '^P30#.{3}', length_min => '12', length_max => '12', # message has only 10 bit but is paddet to 12 }, "31" => ## Pollin ISOTRONIC - 12 Tasten remote # remote basicadresse with 12bit -> changed if push reset behind battery cover # https://github.com/RFD-FHEM/RFFHEM/issues/44 # MU;P0=-9584;P1=592;P2=-665;P3=1223;P4=-1311;D=01234141412341412341414123232323412323234;CP=1;R=0; # MU;P0=-12724;P1=597;P2=-667;P3=1253;P4=-1331;D=01234141412341412341414123232323232323232;CP=1;R=0; # MU;P0=-9588;P1=600;P2=-664;P3=1254;P4=-1325;D=01234141412341412341414123232323232323232;CP=1;R=0; { name => 'Pollin ISOTRONIC', comment => 'remote control model 58608 with 12 buttons', id => '31', knownFreqs => '', one => [-1,2], zero => [-2,1], start => [-18,1], clockabs => 600, format => 'twostate', preamble => 'u31#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '19', length_max => '20', }, "32" => ## FreeTec PE-6946 -> http://www.free-tec.de/Funkklingel-mit-Voic-PE-6946-919.shtml # OLD # https://github.com/RFD-FHEM/RFFHEM/issues/49 # MS;P0=-266;P1=160;P3=-690;P4=580;P5=-6628;D=15131313401340134013401313404040404040404040404040;CP=1;SP=5;O; # NEW # https://github.com/RFD-FHEM/RFFHEM/issues/315 # MU;P0=-6676;P1=578;P2=-278;P4=-680;P5=176;P6=-184;D=541654165412545412121212121212121212121250545454125412541254125454121212121212121212121212;CP=1;R=0; # MU;P0=146;P1=245;P3=571;P4=-708;P5=-284;P7=-6689;D=14351435143514143535353535353535353535350704040435043504350435040435353535353535353535353507040404350435043504350404353535353535353535353535070404043504350435043504043535353535353535353535350704040435043504350435040435353535353535353535353507040404350435;CP=3;R=0;O; # MU;P0=-6680;P1=162;P2=-298;P4=253;P5=-699;P6=555;D=45624562456245456262626262626262626262621015151562156215621562151562626262626262626262626210151515621562156215621515626262626262626262626262;CP=6;R=0; { name => 'FreeTec PE-6946', comment => 'wireless doorbell', id => '32', knownFreqs => '', one => [4,-2], zero => [1,-5], start => [1,-45], # neuerdings MU Erknnung #sync => [1,-49], # old MS Erkennung clockabs => 150, format => 'twostate', preamble => 'P32#', # prepend to converted message clientmodule => 'SD_BELL', modulematch => '^P32#.*', length_min => '24', length_max => '24', }, "33" => ## Thermo-/Hygrosensor S014, renkforce E0001PA, Conrad S522, TX-EZ6 (Weatherstation TZS First Austria) # https://forum.fhem.de/index.php?topic=35844.0 # MS;P0=-7871;P2=-1960;P3=578;P4=-3954;D=030323232323434343434323232323234343434323234343234343234343232323432323232323232343234;CP=3;SP=0;R=0;m=0; # sensor id=62, channel=1, temp=21.1, hum=76, bat=ok # !! ToDo Tx-EZ6 neues Attribut ins Modul bauen um Trend + CRC auszuwerten !! { name => 'weather', comment => 'S014, TFA 30.3200, TCM, Conrad S522, renkforce E0001PA, TX-EZ6', id => '33', knownFreqs => '433.92', one => [1,-8], zero => [1,-4], sync => [1,-16], clockabs => '500', format => 'twostate', # not used now preamble => 'W33#', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'SD_WS', #modulematch => '', length_min => '42', length_max => '44', }, "34" => ## QUIGG GT-7000 Funk-Steckdosendimmer | transmitter DMV-7000 - receiver DMV-7009AS # https://github.com/RFD-FHEM/RFFHEM/issues/195 | https://forum.fhem.de/index.php/topic,38831.msg361341.html#msg361341 # MU;P0=-5284;P1=583;P2=-681;P3=1216;P4=-1319;D=012341412323232341412341412323234123232341;CP=1;R=16; | MU;P0=-9812;P1=589;P2=-671;P3=1261;P4=-1320;D=012341412323232341412341412323232323232323;CP=3;R=19; # MU;P0=-9832;P1=577;P2=-670;P3=1219;P4=-1331;D=012341412323232341412341414123234123234141;CP=1;R=16; | MU;P0=-8816;P1=594;P2=-662;P3=1263;P4=-1330;D=012341412323232341412341414123232323234123;CP=1;R=16; # MU;P0=-677;P1=581;P2=1250;P3=-1319;D=010231310202020231310231310231023102020202;CP=1;R=18; | MU;P0=-29120;P1=603;P2=-666;P3=1235;P4=-1307;D=012341412323232341412341412341232323232341;CP=1;R=16; { name => 'QUIGG_GT-7000', comment => 'remote control DMV-7000', id => '34', knownFreqs => '', one => [-1,2], zero => [-2,1], start => [1], pause => [-15], # 9900 clockabs => '660', format => 'twostate', preamble => 'P34#', clientmodule => 'SD_UT', #modulematch => '', length_min => '20', length_max => '20', }, "35" => ## Homeeasy # MS;P0=907;P1=-376;P2=266;P3=-1001;P6=-4860;D=2601010123230123012323230101012301230101010101230123012301;CP=2;SP=6; { name => 'HomeEasy HE800', id => '35', knownFreqs => '', one => [1,-4], zero => [3.4,-1], sync => [1,-18], clockabs => '280', format => 'twostate', # not used now preamble => 'ih', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'IT', #modulematch => '', length_min => '28', length_max => '40', postDemodulation => \&SIGNALduino_HE800, }, "36" => ## remote - cheap wireless dimmer # https://forum.fhem.de/index.php/topic,38831.msg394238.html#msg394238 # MU;P0=499;P1=-1523;P2=-522;P3=10220;P4=-10047;D=01020202020202020134010102020101010201020202020102010202020202020201340101020201010102010202020201020102020202020202013401010202010101020102020202010201020202020202020134010102020101010201020202020102010202020202020201340101020201010102010;CP=0;O; # MU;P0=-520;P1=500;P2=-1523;P3=10220;P4=-10043;D=01010101210121010101010101012341212101012121210121010101012101210101010101010123412121010121212101210101010121012101010101010101234121210101212121012101010101210121010101010101012341212101012121210121010101012101210101010101010123412121010;CP=1;O; # MU;P0=498;P1=-1524;P2=-521;P3=10212;P4=-10047;D=01010102010202020201020102020202020202013401010202010101020102020202010201020202020202020134010102020101010201020202020102010202020202020201340101020201010102010202020201020102020202020202013401010202010101020102020202010201020202020202020;CP=0;O; { name => 'remote', comment => 'cheap wireless dimmer', id => '36', knownFreqs => '433.92', one => [1,-3], zero => [1,-1], start => [20,-20], clockabs => '500', format => 'twostate', # not used now preamble => 'u36#', # prepend to converted message postamble => '', # Append to converted message #clientmodule => '', #modulematch => '', length_min => '24', length_max => '24', }, "37" => ## Bresser 7009994 # MU;P0=729;P1=-736;P2=483;P3=-251;P4=238;P5=-491;D=010101012323452323454523454545234523234545234523232345454545232345454545452323232345232340;CP=4; # MU;P0=-790;P1=-255;P2=474;P4=226;P6=722;P7=-510;D=721060606060474747472121212147472121472147212121214747212147474721214747212147214721212147214060606060474747472121212140;CP=4;R=216; # short pulse of 250 us followed by a 500 us gap is a 0 bit # long pulse of 500 us followed by a 250 us gap is a 1 bit # sync preamble of pulse, gap, 750 us each, repeated 4 times { name => 'Bresser 7009994', comment => 'temperature / humidity sensor', id => '37', knownFreqs => '', one => [2,-1], zero => [1,-2], start => [3,-3,3,-3], clockabs => '250', format => 'twostate', # not used now preamble => 'W37#', # prepend to converted message clientmodule => 'SD_WS', length_min => '40', length_max => '41', }, "38" => ## Rosenstein & Söhne / PEARL - NC-3911-675 / NC-3912-675 | refrigerator thermometer - 2 channels # https://github.com/RFD-FHEM/RFFHEM/issues/504 | https://forum.fhem.de/index.php/topic,96827.msg901158.html#msg901158 # MU;P0=252;P1=-478;P2=497;P3=-237;P4=-960;P5=737;P6=-727;CP=0;D=01232323232323012301010123012323010101012323010101232323010123230101 0456565656 012301232323232323012301010123012323010101012323010101232323010123230101 0456565656 012301232323232323012301010123012323010101012323010101232323010123230101 04565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101;o3;� { name => 'NC-3911-675', comment => 'refrigerator thermometer', id => '38', knownFreqs => '433.92', one => [2,-1], zero => [1,-2], start => [3,-3,3,-3,3,-3,3,-3], clockabs => 250, format => 'twostate', preamble => 'u38#', length_min => '36', length_max => '36', #clientmodule => '', #modulematch => '^P38#.*', #developId => 'y', }, "39" => ## X10 Protocol # https://github.com/RFD-FHEM/RFFHEM/issues/65 # MU;P0=10530;P1=-2908;P2=533;P3=-598;P4=-1733;P5=767;D=0123242323232423242324232324232423242323232324232323242424242324242424232423242424232501232423232324232423242323242324232423232323242323232424242423242424242324232424242325012324232323242324232423232423242324232323232423232324242424232424242423242324242;CP=2;O; { name => 'X10 Protocol', id => '39', knownFreqs => '', one => [1,-3], zero => [1,-1], start => [17,-7], clockabs => 560, format => 'twostate', preamble => '', # prepend to converted message clientmodule => 'RFXX10REC', #modulematch => '^TX......', length_min => '32', length_max => '44', paddingbits => '8', postDemodulation => \&SIGNALduino_lengtnPrefix, filterfunc => 'SIGNALduino_compPattern', }, "40" => ## Romotec # https://github.com/RFD-FHEM/RFFHEM/issues/71 # MU;P0=300;P1=-772;P2=674;P3=-397;P4=4756;P5=-1512;D=4501232301230123230101232301010123230101230103;CP=0; # MU;P0=-132;P1=-388;P2=675;P4=271;P5=-762;D=012145212145452121454545212145452145214545454521454545452145454541;CP=4; { name => 'Romotec ', comment => 'Tubular motor', id => '40', knownFreqs => '', one => [3,-2], zero => [1,-3], start => [1,-2], clockabs => 270, preamble => 'u40#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '12', #length_max => '', # missing }, "41" => ## Elro (Smartwares) Doorbell DB200 / 16 melodies # https://github.com/RFD-FHEM/RFFHEM/issues/70 # MS;P0=-526;P1=1450;P2=467;P3=-6949;P4=-1519;D=231010101010242424242424102424101010102410241024101024241024241010;CP=2;SP=3;O; # MS;P0=468;P1=-1516;P2=1450;P3=-533;P4=-7291;D=040101230101010123230101232323012323010101012301232323012301012323;CP=0;SP=4;O; # unitec Modell:98156+98YK / 36 melodies # repeats 15, change two codes every 15 repeats --> one button push, 2 codes # MS;P0=1474;P1=-521;P2=495;P3=-1508;P4=-6996;D=242323232301232323010101230123232301012301230123010123230123230101;CP=2;SP=4;R=51;m=0; # MS;P1=-7005;P2=482;P3=-1511;P4=1487;P5=-510;D=212345454523452345234523232345232345232323234523454545234523234545;CP=2;SP=1;R=47;m=2; ## KANGTAI Doorbell (Pollin 94-550405) # https://github.com/RFD-FHEM/RFFHEM/issues/365 # The bell button alternately sends two different codes # P41#BA2885D3: MS;P0=1390;P1=-600;P2=409;P3=-1600;P4=-7083;D=240123010101230123232301230123232301232323230123010101230123230101;CP=2;SP=4;R=248;O;m0; # P41#BA2885D3: MS;P0=1399;P1=-604;P2=397;P3=-1602;P4=-7090;D=240123010101230123232301230123232301232323230123010101230123230101;CP=2;SP=4;R=248;O;m1; # P41#1791D593: MS;P1=403;P2=-7102;P3=-1608;P4=1378;P5=-620;D=121313134513454545451313451313134545451345134513454513134513134545;CP=1;SP=2;R=5;O;m0; { name => 'wireless doorbell', comment => 'Elro (DB200) / KANGTAI (Pollin 94-550405) / unitec', id => '41', knownFreqs => '433.92', zero => [1,-3], one => [3,-1], sync => [1,-14], clockabs => 500, format => 'twostate', preamble => 'P41#', # prepend to converted message clientmodule => 'SD_BELL', modulematch => '^P41#.*', length_min => '32', length_max => '32', }, "42" => ## Pollin 551227 # https://github.com/RFD-FHEM/RFFHEM/issues/390 # MU;P0=1446;P1=-487;P2=477;D=0101012121212121212121212101010101212121212121212121210101010121212121212121212121010101012121212121212121212101010101212121212121212121210101010121212121212121212121010101012121212121212121212101010101212121212121212121210101010121212121212121212121010;CP=2;R=93;O; # MU;P0=-112;P1=1075;P2=-511;P3=452;P5=1418;D=01212121232323232323232323232525252523232323232323232323252525252323232323232323232325252525;CP=3;R=77; { name => 'wireless doorbell', comment => 'Pollin 551227', id => '42', knownFreqs => '433.92', one => [1,-1], zero => [3,-1], start => [1,-1,1,-1,1,-1,], clockabs => 500, format => 'twostate', preamble => 'P42#', clientmodule => 'SD_Bell', #modulematch => '^P42#.*', length_min => '28', length_max => '120', }, "43" => ## Somfy RTS # MC;LL=-1405;LH=1269;SL=-723;SH=620;D=98DBD153D631BB;C=669;L=56;R=229; { name => 'Somfy RTS', id => '43', knownFreqs => '', clockrange => [610,680], # min , max format => 'manchester', preamble => 'Ys', clientmodule => 'SOMFY', # not used now modulematch => '^Ys[0-9A-F]{14}', length_min => '56', length_max => '57', method => \&SIGNALduino_SomfyRTS, # Call to process this message msgIntro => 'SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;', #msgOutro => 'SR;P0=-30415;D=0;', frequency => '10AB85550A', }, "44" => ## Bresser Temeo Trend { name => 'BresserTemeo', comment => 'temperature / humidity sensor', id => '44', knownFreqs => '', clockabs => 500, zero => [4,-4], one => [4,-8], start => [8,-8], preamble => 'W44#', clientmodule => 'SD_WS', modulematch => '^W44#[A-F0-9]{18}', length_min => '64', length_max => '72', }, "44.1" => ## Bresser Temeo Trend { name => 'BresserTemeo', comment => 'temperature / humidity sensor', id => '44', knownFreqs => '', clockabs => 500, zero => [4,-4], one => [4,-8], start => [8,-12], preamble => 'W44x#', clientmodule => 'SD_WS', modulematch => '^W44x#[A-F0-9]{18}', length_min => '64', length_max => '72', }, "45" => ## Revolt # MU;P0=-8320;P1=9972;P2=-376;P3=117;P4=-251;P5=232;D=012345434345434345454545434345454545454543454343434343434343434343434543434345434343434545434345434343434343454343454545454345434343454345434343434343434345454543434343434345434345454543454343434543454345434545;CP=3;R=2 { name => 'Revolt', id => '45', knownFreqs => '', one => [2,-2], zero => [1,-2], start => [83,-3], clockabs => 120, preamble => 'r', # prepend to converted message clientmodule => 'Revolt', modulematch => '^r[A-Fa-f0-9]{22}', length_min => '84', length_max => '120', postDemodulation => sub { my ($name, @bit_msg) = @_; my @new_bitmsg = splice @bit_msg, 0,88; return 1,@new_bitmsg; }, }, "46" => ## Berner Garagentorantrieb GA401 # remote TEDSEN SKX1MD 433.92 MHz - 1 button | settings via 9 switch on battery compartment # compatible with doors: BERNER SKX1MD, ELKA SKX1MD, TEDSEN SKX1LC, TEDSEN SKX1 # https://github.com/RFD-FHEM/RFFHEM/issues/91 # door open # MU;P0=-15829;P1=-3580;P2=1962;P3=-330;P4=245;P5=-2051;D=1234523232345234523232323234523234540023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323;CP=2; # door close # MU;P0=-1943;P1=1966;P2=-327;P3=247;P5=-15810;D=01230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230;CP=1; { name => 'Berner Garagedoor GA401', comment => 'remote control TEDSEN SKX1MD', id => '46', knownFreqs => '', one => [1,-8], zero => [8,-1], start => [1,-63], clockabs => 250, # -1=auto format => 'twostate', # not used now preamble => 'P46#', clientmodule => 'SD_UT', modulematch => '^P46#.*', length_min => '16', length_max => '18', }, "47" => ## Maverick # MC;LL=-507;LH=490;SL=-258;SH=239;D=AA9995599599A959996699A969;C=248;L=104; { name => 'Maverick', comment => 'BBQ / food thermometer', id => '47', knownFreqs => '', clockrange => [180,260], format => 'manchester', preamble => 'P47#', # prepend to converted message clientmodule => 'SD_WS_Maverick', modulematch => '^P47#[569A]{12}.*', length_min => '100', length_max => '108', method => \&SIGNALduino_Maverick, # Call to process this message #polarity => 'invert' }, "48" => ## Joker Dostmann TFA 30.3055.01 # https://github.com/RFD-FHEM/RFFHEM/issues/92 # MU;P0=591;P1=-1488;P2=-3736;P3=1338;P4=-372;P6=-988;D=23406060606063606363606363606060636363636363606060606363606060606060606060606060636060636360106060606060606063606363606363606060636363636363606060606363606060606060606060606060636060636360106060606060606063606363606363606060636363636363606060606363606060;CP=0;O; # MU;P0=96;P1=-244;P2=510;P3=-1000;P4=1520;P5=-1506;D=01232323232343234343232343234323434343434343234323434343232323232323232323232323234343234325232323232323232343234343232343234323434343434343234323434343232323232323232323232323234343234325232323232323232343234343232343234323434343434343234323434343232323;CP=2;O; { name => 'TFA Dostmann', comment => 'Funk-Thermometer Joker TFA 30.3055.01', id => '48', knownFreqs => '', clockabs => 250, # In real it is 500 but this leads to unprceise demodulation one => [-4,6], zero => [-4,2], start => [-6,2], format => 'twostate', preamble => 'U48#', # prepend to converted message #clientmodule => '', modulematch => '^U48#.*', length_min => '47', length_max => '48', }, "49" => ## QUIGG / ALDI GT-9000 # https://github.com/RFD-FHEM/RFFHEM/issues/93 # MU;P0=-563;P1=479;P2=991;P3=-423;P4=361;P5=-1053;P6=3008;P7=-7110;D=2345454523452323454523452323452323452323454545456720151515201520201515201520201520201520201515151567201515152015202015152015202015202015202015151515672015151520152020151520152020152020152020151515156720151515201520201515201520201520201520201515151;CP=1;R=21; { name => 'QUIGG_GT-9000', comment => 'remote control', id => '49', knownFreqs => '', clockabs => 400, one => [2,-1.2], zero => [1,-3], start => [6,-15], format => 'twostate', preamble => 'U49#', # prepend to converted message #clientmodule => '', modulematch => '^U49#.*', length_min => '22', length_max => '28', }, "50" => ## Opus XT300 # https://github.com/RFD-FHEM/RFFHEM/issues/99 # MU;P0=248;P1=-21400;P2=545;P3=-925;P4=1368;P5=-12308;D=01232323232323232343234323432343234343434343234323432343434343432323232323232323232343432323432345232323232323232343234323432343234343434343234323432343434343432323232323232323232343432323432345232323232323232343234323432343234343434343234323432343434343;CP=2;O; { name => 'Opus_XT300', comment => 'sensor for ground humidity', id => '50', knownFreqs => '', clockabs => 500, zero => [3,-2], one => [1,-2], # start => [1,-25], # Wenn das startsignal empfangen wird, fehlt das 1 bit format => 'twostate', preamble => 'W50#', # prepend to converted message clientmodule => 'SD_WS', modulematch => '^W50#.*', length_min => '47', length_max => '48', }, "51" => ## weather sensors # MS;P0=-16046;P1=552;P2=-1039;P3=983;P5=-7907;P6=-1841;P7=-4129;D=15161716171616161717171716161616161617161717171717171617171617161716161616161616171032323232;CP=1;SP=5;O; # https://github.com/RFD-FHEM/RFFHEM/issues/118 { name => 'weather', comment => 'IAN 275901 Wetterstation Lidl', id => '51', knownFreqs => '', one => [1,-8], zero => [1,-4], sync => [1,-13], clockabs => '560', format => 'twostate', # not used now preamble => 'W51#', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'SD_WS', modulematch => '^W51#.*', length_min => '40', length_max => '45', }, "52" => ## Oregon Scientific PIR Protocol # https://forum.fhem.de/index.php/topic,63604.msg548256.html#msg548256 # MC;LL=-1045;LH=1153;SL=-494;SH=606;D=FFFED518;C=549;L=30; # # FFFED5 = Adresse, die per DIP einstellt wird, FFF ändert sich nie # 1 = Kanal, per gesondertem DIP, bei mir bei beiden 1 (CH 1) oder 3 (CH 2) # C = wechselt, 0, 4, 8, C - dann fängt es wieder mit 0 an und wiederholt sich bei jeder Bewegung { name => 'Oregon Scientific PIR', id => '52', knownFreqs => '', clockrange => [470,640], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! clientmodule => 'OREGON', modulematch => '^u52#F{3}|0{3}.*', preamble => 'u52#', length_min => '30', length_max => '30', method => \&SIGNALduino_OSPIR, # Call to process this message polarity => 'invert', }, "55" => ## QUIGG GT-1000 { name => 'QUIGG_GT-1000', comment => 'remote control', id => '55', knownFreqs => '', clockabs => 300, zero => [1,-4], one => [4,-2], sync => [1,-8], format => 'twostate', preamble => 'i', # prepend to converted message clientmodule => 'IT', modulematch => '^i.*', length_min => '24', length_max => '24', }, "56" => ## Celexon { name => 'Celexon', id => '56', knownFreqs => '', clockabs => 200, zero => [1,-3], one => [3,-1], start => [25,-3], format => 'twostate', preamble => 'u56#', # prepend to converted message #clientmodule => '', modulematch => '', length_min => '56', length_max => '68', }, "57" => ## m-e doorbell fuer FG- und Basic-Serie # https://forum.fhem.de/index.php/topic,64251.0.html # MC;LL=-653;LH=665;SL=-317;SH=348;D=D55B58;C=330;L=21; # MC;LL=-654;LH=678;SL=-314;SH=351;D=D55B58;C=332;L=21; # MC;LL=-653;LH=679;SL=-310;SH=351;D=D55B58;C=332;L=21; { name => 'm-e', comment => 'radio gong transmitter for FG- and Basic-Serie', id => '57', knownFreqs => '', clockrange => [300,360], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! clientmodule => 'SD_BELL', modulematch => '^P57#.*', preamble => 'P57#', length_min => '21', length_max => '24', method => \&SIGNALduino_MCRAW, # Call to process this message polarity => 'invert', }, "58" => ## TFA 30.3208.0 # MC;LL=-981;LH=964;SL=-480;SH=520;D=002BA37EBDBBA24F0015D1BF5EDDD127800AE8DFAF6EE893C;C=486;L=194; { name => 'TFA 30.3208.0', comment => 'temperature / humidity sensor', id => '58', #knownFreqs => '', clockrange => [460,520], # min , max format => 'manchester', # tristate can't be migrated from bin into hex! clientmodule => 'SD_WS', modulematch => '^W58*', preamble => 'W58#', length_min => '52', # 54 length_max => '52', # 136 method => \&SIGNALduino_MCTFA, # Call to process this message polarity => 'invert', }, "59" => ## AK-HD-4 remote | 4 Buttons # https://github.com/RFD-FHEM/RFFHEM/issues/133 # MU;P0=819;P1=-919;P2=234;P3=-320;P4=8602;P6=156;D=01230301230301230303012123012301230303030301230303412303012303012303030121230123012303030303012303034123030123030123030301212301230123030303030123030341230301230301230303012123012301230303030301230303412303012303012303030121230123012303030303012303034163;CP=0;O; # MU;P0=-334;P2=8581;P3=237;P4=-516;P5=782;P6=-883;D=23456305056305050563630563056305050505056305050263050563050563050505636305630563050505050563050502630505630505630505056363056305630505050505630505026305056305056305050563630563056305050505056305050263050563050563050505636305630563050505050563050502630505;CP=5;O; { name => 'AK-HD-4', comment => 'remote control with 4 buttons', id => '59', knownFreqs => '', clockabs => 230, zero => [-4,1], one => [-1,4], start => [-1,37], format => 'twostate', # tristate can't be migrated from bin into hex! preamble => 'u59#', # Append to converted message postamble => '', # Append to converted message #clientmodule => '', modulematch => '', length_min => '24', length_max => '24', }, "60" => ## ELV, LA CROSSE (WS2000/WS7000) # MU;P0=32001;P1=-381;P2=835;P3=354;P4=-857;D=01212121212121212121343421212134342121213434342121343421212134213421213421212121342121212134212121213421212121343421343430;CP=2;R=53; # tested sensors: WS-7000-20, AS2000, ASH2000, S2000, S2000I, S2001A, S2001IA, # ASH2200, S300IA, S2001I, S2000ID, S2001ID, S2500H # not tested: AS3, S2000W, S2000R, WS7000-15, WS7000-16, WS2500-19, S300TH, S555TH # das letzte Bit (1) und mehrere Bit (0) Preambel fehlen meistens # ___ _ # | |_ | |___ # Bit 0 Bit 1 # kurz 366 mikroSek / lang 854 mikroSek / gesamt 1220 mikroSek - Sollzeiten { name => 'WS2000', comment => 'Series WS2000/WS7000 of various sensors', id => '60', knownFreqs => '', one => [3,-7], zero => [7,-3], clockabs => 122, preamble => 'K', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'CUL_WS', length_min => '38', # 46, letztes Bit fehlt = 45, 10 Bit Preambel = 35 Bit Daten length_max => '82', postDemodulation => \&SIGNALduino_postDemo_WS2000, }, "61" => ## ELV FS10 # tested transmitter: FS10-S8, FS10-S4, FS10-ZE # tested receiver: FS10-ST, FS10-MS, WS3000-TV, PC-Wettersensor-Empfaenger # sends 2 messages with 43 or 48 bits in distance of 100 mS (on/off) , last bit 1 is missing # sends x messages with 43 or 48 bits in distance of 200 mS (dimm) , repeats second message # MU;P0=1776;P1=-410;P2=383;P3=-820;D=01212121212121212121212123212121232323212323232121212323232121212321212123232123212120;CP=2;R=74; # __ __ # | |__ | |____ # Bit 0 Bit 1 # kurz 400 mikroSek / lang 800 mikroSek / gesamt 800 mikroSek = 0, gesamt 1200 mikroSek = 1 - Sollzeiten { name => 'FS10', comment => 'remote control', id => '61', knownFreqs => '433.92', one => [1,-2], zero => [1,-1], clockabs => 400, pause => [-81], # 400*81=32400*6=194400 - pause between repeats of send messages (clockabs*pause must be < 32768) format => 'twostate', preamble => 'P61#', # prepend to converted message postamble => '', # Append to converted message clientmodule => 'FS10', #modulematch => '', length_min => '38', # eigentlich 41 oder 46 (Pruefsumme nicht bei allen) length_max => '48', # eigentlich 46 }, "62" => ## Clarus_Switch # MU;P0=-5893;P4=-634;P5=498;P6=-257;P7=116;D=45656567474747474745656707456747474747456745674567456565674747474747456567074567474747474567456745674565656747474747474565670745674747474745674567456745656567474747474745656707456747474747456745674567456565674747474747456567074567474747474567456745674567;CP=7;O; { name => 'Clarus_Switch', id => '62', knownFreqs => '', one => [3,-1], zero => [1,-3], start => [1,-35], # ca 30-40 clockabs => 189, preamble => 'i', # prepend to converted message clientmodule => 'IT', #modulematch => '', length_min => '24', length_max => '24', }, "63" => ## Warema MU # https://forum.fhem.de/index.php/topic,38831.msg395978/topicseen.html#msg395978 | https://www.mikrocontroller.net/topic/264063 # MU;P0=-2988;P1=1762;P2=-1781;P3=-902;P4=871;P5=6762;P6=5012;D=0121342434343434352434313434243521342134343436; # MU;P0=6324;P1=-1789;P2=864;P3=-910;P4=1756;D=0123234143212323232323032321234141032323232323232323;CP=2; { name => 'Warema', comment => 'radio shutter switch (is still experimental)', id => '63', knownFreqs => '', developId => 'y', one => [1], zero => [0], clockabs => 800, syncabs => '6700', # Special field for filterMC function preamble => 'u63#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '24', #length_max => '', # missing filterfunc => 'SIGNALduino_filterMC', }, "64" => ## WH2 ############################################################################# # MU;P0=-32001;P1=457;P2=-1064;P3=1438;D=0123232323212121232123232321212121212121212323212121232321;CP=1;R=63; # MU;P0=-32001;P1=473;P2=-1058;P3=1454;D=0123232323212121232123232121212121212121212121232321212321;CP=1;R=51; # MU;P0=134;P1=-113;P3=412;P4=-1062;P5=1379;D=01010101013434343434343454345454345454545454345454545454343434545434345454345454545454543454543454345454545434545454345;CP=3; { name => 'WH2', comment => 'temperature / humidity sensor', id => '64', knownFreqs => '', one => [1,-2], zero => [3,-2], clockabs => 490, clientmodule => 'SD_WS', modulematch => '^W64*', preamble => 'W64#', # prepend to converted message postamble => '', # Append to converted message #clientmodule => '', length_min => '48', length_max => '54', }, "65" => ## Homeeasy # MS;P1=231;P2=-1336;P4=-312;P5=-8920;D=15121214141412121212141414121212121414121214121214141212141212141212121414121414141212121214141214121212141412141212;CP=1;SP=5; { name => 'HomeEasy HE_EU', id => '65', knownFreqs => '', one => [1,-5.5], zero => [1,-1.2], sync => [1,-38], clockabs => 230, format => 'twostate', # not used now preamble => 'ih', clientmodule => 'IT', length_min => '57', length_max => '72', postDemodulation => \&SIGNALduino_HE_EU, }, "66" => ## TX2 Protocol (Remote Temp Transmitter & Remote Thermo Model 7035) # https://github.com/RFD-FHEM/RFFHEM/issues/160 # MU;P0=13312;P1=-2785;P2=4985;P3=1124;P4=-6442;P5=3181;P6=-31980;D=0121345434545454545434545454543454545434343454543434545434545454545454343434545434343434545621213454345454545454345454545434545454343434545434345454345454545454543434345454343434345456212134543454545454543454545454345454543434345454343454543454545454545;CP=3;R=73;O; { name => 'WS7035', comment => 'temperature sensor', id => '66', knownFreqs => '', one => [10,-52], zero => [27,-52], start => [-21,42,-21], clockabs => 122, format => 'pwm', # not used now preamble => 'TX', clientmodule => 'CUL_TX', modulematch => '^TX......', length_min => '43', length_max => '44', postDemodulation => \&SIGNALduino_postDemo_WS7035, }, "67" => ## TX2 Protocol (Remote Datalink & Remote Thermo Model 7053, 7054) # https://github.com/RFD-FHEM/RFFHEM/issues/162 # MU;P0=3381;P1=-672;P2=-4628;P3=1142;P4=-30768;D=010 2320232020202020232020232020202320232323202323202020202020202020 4 010 2320232020202020232020232020202320232323202323202020202020202020 0;CP=0;R=45; # MU;P0=1148;P1=3421;P6=-664;P7=-4631;D=161 7071707171717171707171707171717171707070717071717171707071717171 0;CP=1;R=29; # Message repeats 4 x with pause of ca. 30-34 mS # __ ____ # ________| | ________| | # Bit 1 Bit 0 # 4630 1220 4630 3420 mikroSek - mit Oszi gemessene Zeiten { name => 'WS7053', comment => 'temperature sensor', id => '67', knownFreqs => '', one => [-38,10], # -4636, 1220 zero => [-38,28], # -4636, 3416 clockabs => 122, preamble => 'TX', # prepend to converted message clientmodule => 'CUL_TX', modulematch => '^TX......', length_min => '32', length_max => '34', postDemodulation => \&SIGNALduino_postDemo_WS7053, }, # "68" => can use "69" => ## Hoermann HSM2, HSM4, HS1-868-BS (868 MHz) # https://github.com/RFD-FHEM/RFFHEM/issues/149 # MU;P0=-508;P1=1029;P2=503;P3=-1023;P4=12388;D=01010232323232310104010101010101010102323231010232310231023232323231023101023101010231010101010232323232310104010101010101010102323231010232310231023232323231023101023101010231010101010232323232310104010101010101010102323231010232310231023232323231023101;CP=2;R=37;O; # Remote control HS1-868-BS (one button): # https://github.com/RFD-FHEM/RFFHEM/issues/344 # MU;P0=-578;P1=1033;P2=506;P3=-1110;P4=13632;D=0101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010;CP=2;R=77; # MU;P0=-547;P1=1067;P2=553;P3=-1066;P4=13449;D=0101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310;CP=2;R=71; # https://forum.fhem.de/index.php/topic,71877.msg642879.html (HSM4, Taste 1-4) # MU;P0=-332;P1=92;P2=-1028;P3=12269;P4=-510;P5=1014;P6=517;D=01234545454545454545462626254546262546254626262626254625454625454546254545454546262626262545434545454545454545462626254546262546254626262626254625454625454546254545454546262626262545434545454545454545462626254546262546254626262626254625454625454546254545;CP=6;R=37;O; # MU;P0=509;P1=-10128;P2=1340;P3=-517;P4=1019;P5=-1019;P6=12372;D=01234343434343434343050505434305054305430505050505430543430543434305434343430543050505054343634343434343434343050505434305054305430505050505430543430543434305434343430543050505054343634343434343434343050505434305054305430505050505430543430543434305434343;CP=0;R=52;O; # MU;P0=12376;P1=360;P2=-10284;P3=1016;P4=-507;P6=521;P7=-1012;D=01234343434343434343467676734346767346734676767676734673434673434346734343434676767346767343404343434343434343467676734346767346734676767676734673434673434346734343434676767346767343404343434343434343467676734346767346734676767676734673434673434346734343;CP=6;R=55;O; # MU;P0=-3656;P1=12248;P2=-519;P3=1008;P4=506;P5=-1033;D=01232323232323232324545453232454532453245454545453245323245323232453232323245453245454532321232323232323232324545453232454532453245454545453245323245323232453232323245453245454532321232323232323232324545453232454532453245454545453245323245323232453232323;CP=4;R=48;O; { name => 'Hoermann', comment => 'remote control HS1-868-BS, HSM4', id => '69', knownFreqs => '', zero => [2,-1], # 1020,510 one => [1,-2], # 510,1020 start => [25,-1], # 12750,510 clockabs => 510, format => 'twostate', clientmodule => 'SD_UT', modulematch => '^P69#.{11}', preamble => 'P69#', length_min => '44', length_max => '44', }, "70" => ## FHT80TF (Funk-Tuer-Fenster-Melder FHT 80TF und FHT 80TF-2) # https://github.com/RFD-FHEM/RFFHEM/issues/171 # closed MU;P0=-24396;P1=417;P2=-376;P3=610;P4=-582;D=012121212121212121212121234123434121234341212343434121234123434343412343434121234341212121212341212341234341234123434;CP=1;R=35; # open MU;P0=-21652;P1=429;P2=-367;P4=634;P5=-555;D=012121212121212121212121245124545121245451212454545121245124545454512454545121245451212121212124512451245451245121212;CP=1;R=38; { name => 'FHT80TF', comment => 'door/window switch', id => '70', knownFreqs => '868.35', one => [1.5,-1.5], # 600 zero => [1,-1], # 400 clockabs => 400, format => 'twostate', # not used now clientmodule => 'CUL_FHTTK', preamble => 'T', length_min => '50', length_max => '58', postDemodulation => \&SIGNALduino_postDemo_FHT80TF, }, "71" => ## PEARL infactory Poolthermometer (PV-8644) # MU;P0=1735;P1=-1160;P2=591;P3=-876;D=0123012323010101230101232301230123010101010123012301012323232323232301232323232323232323012301012;CP=2;R=97; { name => 'PEARL', comment => 'infactory Poolthermometer (PV-8644)', id => '71', knownFreqs => '433.92', clockabs => 580, zero => [3,-2], one => [1,-1.5], format => 'twostate', preamble => 'W71#', # prepend to converted message clientmodule => 'SD_WS', #modulematch => '^W71#.*' length_min => '48', length_max => '48', }, "72" => ## Siro blinds MU @Dr. Smag # ! same definition how ID 16 ! # https://forum.fhem.de/index.php?topic=77167.0 # MU;P0=-760;P1=334;P2=693;P3=-399;P4=-8942;P5=4796;P6=-1540;D=01010102310232310101010102310232323101010102310101010101023102323102323102323102310101010102310232323101010102310101010101023102310231023102456102310232310232310231010101010231023232310101010231010101010102310231023102310245610231023231023231023101010101;CP=1;R=45;O; # MU;P0=-8848;P1=4804;P2=-1512;P3=336;P4=-757;P5=695;P6=-402;D=0123456345656345656345634343434345634565656343434345634343434343456345634563456345;CP=3;R=49; { name => 'Siro shutter', comment => 'message decode as MU', id => '72', knownFreqs => '', dispatchequals => 'true', one => [2,-1.2], # 680, -400 zero => [1,-2.2], # 340, -750 start => [14,-4.4], # 4800,-1520 clockabs => 340, format => 'twostate', preamble => 'P72#', # prepend to converted message clientmodule => 'Siro', #modulematch => '', length_min => '39', length_max => '40', msgOutro => 'SR;P0=-8500;D=0;', }, "72.1" => ## Siro blinds MS @Dr. Smag # MS;P0=4803;P1=-1522;P2=333;P3=-769;P4=699;P5=-393;P6=-9190;D=2601234523454523454523452323232323452345454523232323452323232323234523232345454545;CP=2;SP=6;R=61; { name => 'Siro shutter', comment => 'message decode as MS', id => '72', knownFreqs => '', developId => 'm', dispatchequals => 'true', one => [2,-1.2], # 680, -400 zero => [1,-2.2], # 340, -750 sync => [14,-4.4], # 4800,-1520 clockabs => 340, format => 'twostate', preamble => 'P72#', # prepend to converted message clientmodule => 'Siro', #modulematch => '', length_min => '39', length_max => '40', #msgOutro => 'SR;P0=-8500;D=0;', }, "73" => ## FHT80 - Raumthermostat (868Mhz), @HomeAutoUser # MU;P0=136;P1=-112;P2=631;P3=-392;P4=402;P5=-592;P6=-8952;D=0123434343434343434343434325434343254325252543432543434343434325434343434343434343254325252543254325434343434343434343434343252525432543464343434343434343434343432543434325432525254343254343434343432543434343434343434325432525254325432543434343434343434;CP=4;R=250; { name => 'FHT80', comment => 'roomthermostat (only receive)', id => '73', knownFreqs => '868.35', developId => 'y', one => [1.5,-1.5], # 600 zero => [1,-1], # 400 pause => [-25], clockabs => 400, format => 'twostate', # not used now clientmodule => 'FHT', preamble => '810c04xx0909a001', length_min => '59', length_max => '67', postDemodulation => \&SIGNALduino_postDemo_FHT80, }, "74" => ## FS20 - 'Remote Control (868Mhz), @HomeAutoUser # MU;P0=-10420;P1=-92;P2=398;P3=-417;P5=596;P6=-592;D=1232323232323232323232323562323235656232323232356232356232623232323232323232323232323235623232323562356565623565623562023232323232323232323232356232323565623232323235623235623232323232323232323232323232323562323232356235656562356562356202323232323232323;CP=2;R=72; { name => 'FS20', comment => 'remote control', id => '74', knownFreqs => '868.35', one => [1.5,-1.5], # 600 zero => [1,-1], # 400 pause => [-25], clockabs => 400, format => 'twostate', # not used now clientmodule => 'FS20', preamble => '810b04f70101a001', length_min => '50', length_max => '67', postDemodulation => \&SIGNALduino_postDemo_FS20, }, "75" => ## Conrad RSL (Erweiterung v2) @litronics https://github.com/RFD-FHEM/SIGNALDuino/issues/69 # ! same definition how ID 5, but other length ! # !! protocol needed revision - start or sync failed !! https://github.com/RFD-FHEM/SIGNALDuino/issues/69#issuecomment-440349328 # MU;P0=-1365;P1=477;P2=1145;P3=-734;P4=-6332;D=01023202310102323102423102323102323101023232323101010232323231023102323102310102323102423102323102323101023232323101010232323231023102323102310102323102;CP=1;R=12; { name => 'Conrad RSL v2', comment => 'remotes and switches', id => '75', knownFreqs => '', one => [3,-1], zero => [1,-3], clockabs => 500, format => 'twostate', developId => 'y', clientmodule => 'SD_RSL', preamble => 'P1#', modulematch => '^P1#[A-Fa-f0-9]{8}', length_min => '32', length_max => '40', }, "76" => ## Kabellose LED-Weihnachtskerzen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{ name => 'LED XM21', comment => 'remote with 2-buttons for LED X-MAS light string', id => '76', knownFreqs => '433.92', one => [1.2,-2], # 120,-200 zero => [], # existiert nicht start => [4.5,-2,4.5,-2,4.5,-2,4.5,-2], # 450,-200 Starsequenz clockabs => 100, format => 'twostate', # not used now clientmodule => 'SD_UT', preamble => 'P76#', length_min => 58, length_max => 64, }, "77" => ## https://github.com/juergs/NANO_DS1820_4Fach # MU;P0=102;P1=236;P2=-2192;P3=971;P6=-21542;D=01230303030103010303030303010103010303010303010101030301030103030303010101030301030303010163030303010301030303030301010301030301030301010103030103010303030301010103030103030301016303030301030103030303030101030103030103030101010303010301030303030101010303;CP=0;O; # MU;P0=-1483;P1=239;P2=970;P3=-21544;D=01020202010132020202010201020202020201010201020201020201010102020102010202020201010102020102020201013202020201020102020202020101020102020102020101010202010201020202020101010202010202020101;CP=1; # MU;P0=-168;P1=420;P2=-416;P3=968;P4=-1491;P5=242;P6=-21536;D=01234343434543454343434343454543454345434543454345434343434343434343454345434343434345454363434343454345434343434345454345434543454345434543434343434343434345434543434343434545436343434345434543434343434545434543454345434543454343434343434343434543454343;CP=3;O; # MU;P0=-1483;P1=969;P2=236;P3=-21542;D=01010102020131010101020102010101010102020102010201020102010201010101010101010102010201010101010202013101010102010201010101010202010201020102010201020101010101010101010201020101010101020201;CP=1; # MU;P0=-32001;P1=112;P2=-8408;P3=968;P4=-1490;P5=239;P6=-21542;D=01234343434543454343434343454543454345454343454345434343434343434343454345434343434345454563434343454345434343434345454345434545434345434543434343434343434345434543434343434545456343434345434543434343434545434543454543434543454343434343434343434543454343;CP=3;O; # MU;P0=-1483;P1=968;P2=240;P3=-21542;D=01010102020231010101020102010101010102020102010202010102010201010101010101010102010201010101010202023101010102010201010101010202010201020201010201020101010101010101010201020101010101020202;CP=1; # MU;P0=-32001;P1=969;P2=-1483;P3=237;P4=-21542;D=01212121232123212121212123232123232121232123212321212121212121212123212321212121232123214121212123212321212121212323212323212123212321232121212121212121212321232121212123212321412121212321232121212121232321232321212321232123212121212121212121232123212121;CP=1;O; # MU;P0=-1485;P1=967;P2=236;P3=-21536;D=010201020131010101020102010101010102020102020101020102010201010101010101010102010201010101020102013101010102010201010101010202010202010102010201020101010101010101010201020101010102010201;CP=1; { name => 'NANO_DS1820_4Fach', comment => 'self build sensor', id => '77', knownFreqs => '', developId => 'y', zero => [4,-6], one => [1,-6], clockabs => 250, format => 'pwm', # preamble => 'TX', # prepend to converted message clientmodule => 'CUL_TX', modulematch => '^TX......', length_min => '43', length_max => '44', remove_zero => 1, # Removes leading zeros from output }, "78" => ## geiger blind motors # MU;P0=313;P1=1212;P2=-309;P4=-2024;P5=-16091;P6=2014;D=01204040562620404626204040404040462046204040562620404626204040404040462046204040562620404626204040404040462046204040562620404626204040404040462046204040;CP=0;R=236;) # https://forum.fhem.de/index.php/topic,39153.0.html { name => 'geiger', comment => 'geiger blind motors', id => '78', knownFreqs => '', developId => 'y', zero => [1,-6.6], one => [6.6,-1], start => [-53], clockabs => 300, format => 'twostate', preamble => 'u78#', # prepend to converted message clientmodule => 'SIGNALduino_un', #modulematch => '^TX......', length_min => '14', length_max => '18', paddingbits => '2' # pad 1 bit, default is 4 }, "79" => ## Heidemann | Heidemann HX | VTX-BELL # https://github.com/RFD-FHEM/SIGNALDuino/issues/84 # MU;P0=656;P1=-656;P2=335;P3=-326;P4=-5024;D=0123012123012303030301 24 230123012123012303030301 24 230123012123012303030301 24 2301230121230123030303012423012301212301230303030124230123012123012303030301242301230121230123030303012423012301212301230303030124230123012123012303030301242301230121230123030303;CP=2;O; # https://forum.fhem.de/index.php/topic,64251.0.html # MU;P0=540;P1=-421;P2=-703;P3=268;P4=-4948;D=4 323102323101010101010232 34 323102323101010101010232 34 323102323101010101010232 34 3231023231010101010102323432310232310101010101023234323102323101010101010232343231023231010101010102323432310232310101010101023234323102323101010101010232343231023231010101010;CP=3;O; # https://github.com/RFD-FHEM/RFFHEM/issues/252 # MU;P0=-24096;P1=314;P2=-303;P3=615;P4=-603;P5=220;P6=-4672;D=0123456123412341414141412323234 16 123412341414141412323234 16 12341234141414141232323416123412341414141412323234161234123414141414123232341612341234141414141232323416123412341414141412323234161234123414141414123232341612341234141414141232323416123412341414;CP=1;R=26;O; # MU;P0=-10692;P1=602;P2=-608;P3=311;P4=-305;P5=-4666;D=01234123232323234141412 35 341234123232323234141412 35 341234123232323234141412 35 34123412323232323414141235341234123232323234141412353412341232323232341414123534123412323232323414141235341234123232323234141412353412341232323232341414123534123412323232323414;CP=3;R=47;O; # MU;P0=-7152;P1=872;P2=-593;P3=323;P4=-296;P5=622;P6=-4650;D=01234523232323234545452 36 345234523232323234545452 36 345234523232323234545452 36 34523452323232323454545236345234523232323234545452363452345232323232345454523634523452323232323454545236345234523232323234545452363452345232323232345454523634523452323232323454;CP=3;R=26;O; # https://forum.fhem.de/index.php/topic,58397.msg879878.html#msg879878 # MU;P0=-421;P1=344;P2=-699;P4=659;P6=-5203;P7=259;D=1612121040404040404040421216121210404040404040404212161212104040404040404042121612121040404040404040421216121210404040404040404272761212104040404040404042121612121040404040404040421216121210404040404040404212167272104040404040404042721612127040404040404;CP=4;R=0;O; { name => 'wireless doorbell', comment => 'Heidemann | Heidemann HX | VTX-BELL', id => '79', knownFreqs => '', zero => [-2,1], one => [-1,2], start => [-15,1], clockabs => 330, format => 'twostate', # preamble => 'P79#', # prepend to converted message clientmodule => 'SD_BELL', modulematch => '^P79#.*', length_min => '12', length_max => '12', }, "80" => ## EM1000WZ (Energy-Monitor) Funkprotokoll (868Mhz), @HomeAutoUser | Derwelcherichbin # https://github.com/RFD-FHEM/RFFHEM/issues/253 # MU;P1=-417;P2=385;P3=-815;P4=-12058;D=42121212121212121212121212121212121232321212121212121232321212121212121232323212323212321232121212321212123232121212321212121232323212121212121232121212121212121232323212121212123232321232121212121232123232323212321;CP=2;R=87; { name => 'EM1000WZ', comment => 'EM (Energy-Monitor)', id => '80', knownFreqs => '868.35', one => [1,-2], # 800 zero => [1,-1], # 400 clockabs => 400, format => 'twostate', # not used now clientmodule => 'CUL_EM', preamble => 'E', length_min => '104', length_max => '114', postDemodulation => \&SIGNALduino_postDemo_EM, }, "81" => ## Remote control SA-434-1 based on HT12E @ elektron-bbs # MU;P0=-485;P1=188;P2=-6784;P3=508;P5=1010;P6=-974;P7=-17172;D=0123050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056;CP=3;R=0; # MU;P0=-1756;P1=112;P2=-11752;P3=496;P4=-495;P5=998;P6=-988;P7=-17183;D=0123454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456;CP=3;R=0; # __ ____ # ____| | __| | # Bit 1 Bit 0 # short 500 microSec / long 1000 microSec / bittime 1500 mikroSek / pilot 12 * bittime, from that 1/3 bitlength high { name => 'SA-434-1', comment => 'remote control SA-434-1 mini 923301 based on HT12E', id => '81', knownFreqs => '433.92', one => [-2,1], # i.O. zero => [-1,2], # i.O. start => [-35,1], # Message is not provided as MS, worakround is start clockabs => 500, format => 'twostate', preamble => 'P81#', # prepend to converted message modulematch => '^P81#.{3}', clientmodule => 'SD_UT', length_min => '12', length_max => '12', }, "82" => ## Fernotron shutters and light switches # https://github.com/RFD-FHEM/RFFHEM/issues/257 # MU;P0=-32001;P1=435;P2=-379;P4=-3201;P5=831;P6=-778;D=01212121212121214525252525252521652161452525252525252161652141652521652521652521614165252165252165216521416521616165216525216141652161616521652165214165252161616521652161416525216161652161652141616525252165252521614161652525216525216521452165252525252525;CP=1;O; # the messages received are usual missing 12 bits at the end for some reason. So the checksum byte is missing. # Fernotron protocol is unidirectional. Here we can only receive messages from controllers send to receivers. { name => 'Fernotron', comment => 'shutters and light switches', id => '82', # protocol number knownFreqs => '', developId => 'm', dispatchBin => '1', paddingbits => '1', # disable padding one => [1,-2], # on=400us, off=800us zero => [2,-1], # on=800us, off=400us float => [1,-8], # on=400us, off=3200us. the preamble and each 10bit word has one [1,-8] in front pause => [1,-1], # preamble (5x) clockabs => 400, # 400us format => 'twostate', preamble => 'P82#', # prepend our protocol number to converted message clientmodule => 'Fernotron', length_min => '100', # actual 120 bit (12 x 10bit words to decode 6 bytes data), but last 20 are for checksum length_max => '3360', # 3360 bit (336 x 10bit words to decode 168 bytes data) for full timer message }, "83" => ## Remote control RH787T based on MOSDESIGN SEMICONDUCTOR CORP (CMOS ASIC encoder) M1EN compatible HT12E # for example Westinghouse Deckenventilator Delancey, 6 speed buttons, @zwiebelxxl # https://github.com/RFD-FHEM/RFFHEM/issues/250 # Taste 1 MU;P0=388;P1=-112;P2=267;P3=-378;P5=585;P6=-693;P7=-11234;D=0123035353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262;CP=2;R=43;O; # Taste 2 MU;P0=-176;P1=262;P2=-11240;P3=112;P5=-367;P6=591;P7=-695;D=0123215656565656717171567156712156565656567171715671567121565656565671717156715671215656565656717171567156712156565656567171715671567121565656565671717156715671215656565656717171567156712156565656567171715671567121565656565671717171717171215656565656717;CP=1;R=19;O; # Taste 3 MU;P0=564;P1=-392;P2=-713;P3=245;P4=-11247;D=0101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023;CP=3;R=40;O; { name => 'RH787T', comment => 'remote control for example Westinghouse Delancey 7800140', id => '83', knownFreqs => '', one => [-2,1], zero => [-1,2], start => [-35,1], # calculated 12126,31579 µS clockabs => 335, # calculated ca 336,8421053 µS short - 673,6842105µS long format => 'twostate', # there is a pause puls between words preamble => 'P83#', # prepend to converted message clientmodule => 'SD_UT', modulematch => '^P83#.{3}', length_min => '12', length_max => '12', }, "84" => ## Funk Wetterstation Auriol IAN 283582 Version 06/2017 (Lidl), Modell-Nr.: HG02832D, 09/2018@roobbb # https://github.com/RFD-FHEM/RFFHEM/issues/263 # MU;P0=-28796;P1=376;P2=-875;P3=834;P4=220;P5=-632;P6=592;P7=-268;D=0123232324545454545456767454567674567456745674545454545456767676767674567674567676767456;CP=4;R=22; # MU;P0=-28784;P1=340;P2=-903;P3=814;P4=223;P5=-632;P6=604;P7=-248;D=0123232324545454545456767456745456767674545674567454545456745454545456767454545456745676;CP=4;R=22; # MU;P0=-21520;P1=235;P2=-855;P3=846;P4=620;P5=-236;P7=-614;D=012323232454545454545451717451717171745171717171717171717174517171745174517174517174545;CP=1;R=217; ## Sempre 92596/65395, Hofer/Aldi, WS97210-1, WS97230-1, WS97210-2, WS97230-2 # https://github.com/RFD-FHEM/RFFHEM/issues/223 # MU;P0=11916;P1=-852;P2=856;P3=610;P4=-240;P5=237;P6=-610;D=01212134563456563434565634565634343456565634565656565634345634565656563434563456343430;CP=5;R=254; # MU;P0=-30004;P1=815;P2=-910;P3=599;P4=-263;P5=234;P6=-621;D=0121212345634565634345656345656343456345656345656565656343456345634563456343434565656;CP=5;R=5; { name => 'IAN 283582', comment => 'Weatherstation Auriol IAN 283582 / Sempre 92596/65395', id => '84', knownFreqs => '', one => [3,-1], zero => [1,-3], start => [4,-4,4,-4,4,-4], clockabs => 215, format => 'twostate', preamble => 'W84#', # prepend to converted message postamble => '', # append to converted message clientmodule => 'SD_WS', length_min => '39', # das letzte Bit fehlt meistens length_max => '40', }, "85" => ## Funk Wetterstation TFA 35.1140.01 mit Temperatur-/Feuchte- und Windsensor TFA 30.3222.02 09/2018@Iron-R # https://github.com/RFD-FHEM/RFFHEM/issues/266 # MU;P0=-509;P1=474;P2=-260;P3=228;P4=718;P5=-745;D=01212303030303012301230123012301230301212121230454545453030303012123030301230303012301212123030301212303030303030303012303012303012303012301212303030303012301230123012301230301212121212454545453030303012123030301230303012301212123030301212303030303030303;CP=3;R=46;O; # MU;P0=-504;P1=481;P2=-254;P3=227;P4=723;P5=-739;P6=-1848;D=01230121212303030121230303030303030453030303012123030301230303012301212303030303030304530303030121230303012303030123012121230303012123030303030303030123030123030123030123012123030303030123012301230123012303012121212364545454530303030121230303012303030123;CP=3;R=45;O; # MU;P0=7944;P1=-724;P2=742;P3=241;P4=-495;P5=483;P6=-248;D=01212121343434345656343434563434345634565656343434565634343434343434345634345634345634343434343434343434345634565634345656345634343456563421212121343434345656343434563434345634565656343434565634343434343434345634345634345634343434343434343434345634565634;CP=3;R=47;O;� { name => 'TFA 30.3222.02', comment => 'Combisensor for Weatherstation TFA 35.1140.01', id => '85', knownFreqs => '', one => [2,-1], zero => [1,-2], start => [3,-3,3,-3,3,-3], clockabs => 250, format => 'twostate', preamble => 'W85#', # prepend to converted message postamble => '', # append to converted message clientmodule => 'SD_WS', length_min => '64', length_max => '68', }, "86" => ### for remote controls: Novy 840029, CAME TOP 432EV, OSCH & Neff Transmitter SF01 01319004 ### CAME TOP 432EV 433,92 MHz für z.B. Drehtor Antrieb: # https://forum.fhem.de/index.php/topic,63370.msg849400.html#msg849400 # https://github.com/RFD-FHEM/RFFHEM/issues/151 # MU;P0=711;P1=-15288;P4=132;P5=-712;P6=316;P7=-313;D=4565656705656567056567056 16 565656705656567056567056 16 56565670565656705656705616565656705656567056567056165656567056565670565670561656565670565656705656705616565656705656567056567056165656567056565670565670561656565670565656705656705616565656705656567056;CP=6;R=52; # MU;P0=-322;P1=136;P2=-15241;P3=288;P4=-735;P6=723;D=012343434306434343064343430623434343064343430643434306 2343434306434343064343430 623434343064343430643434306234343430643434306434343062343434306434343064343430623434343064343430643434306234343430643434306434343062343434306434343064343430;CP=3;R=27; # MU;P0=-15281;P1=293;P2=-745;P3=-319;P4=703;P5=212;P6=152;P7=-428;D=0 1212121342121213421213421 01 212121342121213421213421 01 21212134212121342121342101212121342121213421213421012121213421212134212134210121243134212121342121342101252526742121213425213421012121213421212134212134210121212134212;CP=1;R=23; # rechteTaste: 0x112 (000100010010), linkeTaste: 0x111 (000100010001), the least significant bits distinguish the keys ### remote control Novy 840029 for Novy Pureline 6830 kitchen hood: # https://github.com/RFD-FHEM/RFFHEM/issues/331 # light on/off button # MU;P0=710;P1=353;P2=-403;P4=-761;P6=-16071;D=20204161204120412041204120414141204120202041612041204120412041204141412041202020416120412041204120412041414120412020204161204120412041204120414141204120202041;CP=1;R=40; # plus button # MU;P0=22808;P1=-24232;P2=701;P3=-765;P4=357;P5=-15970;P7=-406;D=012345472347234723472347234723454723472347234723472347234547234723472347234723472345472347234723472347234723454723472347234723472347234;CP=4;R=39; # minus button # MU;P0=-8032;P1=364;P2=-398;P3=700;P4=-760;P5=-15980;D=0123412341234123412341412351234123412341234123414123512341234123412341234141235123412341234123412341412351234123412341234123414123;CP=1;R=40; # power button # MU;P0=-756;P1=718;P2=354;P3=-395;P4=-16056;D=01020202310231310202 42 310231023102310231020202310231310202 42 31023102310231023102020231023131020242310231023102310231020202310231310202;CP=2;R=41; # novy button # MU;P0=706;P1=-763;P2=370;P3=-405;P4=-15980;D=0123012301230304230123012301230123012303042;CP=2;R=42; ### Neff Transmitter SF01 01319004 (SF01_01319004) 433,92 MHz # https://github.com/RFD-FHEM/RFFHEM/issues/376 # MU;P0=-707;P1=332;P2=-376;P3=670;P5=-15243;D=01012301232323230123012301232301010123510123012323232301230123012323010101235101230123232323012301230123230101012351012301232323230123012301232301010123510123012323232301230123012323010101235101230123232323012301230123230101012351012301232323230123012301;CP=1;R=3;O; # MU;P0=-32001;P1=348;P2=-704;P3=-374;P4=664;P5=-15255;D=01213421343434342134213421343421213434512134213434343421342134213434212134345121342134343434213421342134342121343451213421343434342134213421343421213434512134213434343421342134213434212134345121342134343434213421342134342121343451213421343434342134213421;CP=1;R=15;O; # MU;P0=-32001;P1=326;P2=-721;P3=-385;P4=656;P5=-15267;D=01213421343434342134213421343421342134512134213434343421342134213434213421345121342134343434213421342134342134213451213421343434342134213421343421342134512134213434343421342134213434213421345121342134343434213421342134342134213451213421343434342134213421;CP=1;R=10;O; # MU;P0=-372;P1=330;P2=684;P3=-699;P4=-14178;D=010231020202023102310231020231310231413102310202020231023102310202313102314;CP=1;R=253; # MU;P0=-710;P1=329;P2=-388;P3=661;P4=-14766;D=01232301410123012323232301230123012323012323014;CP=1;R=1; ### BOSCH Transmitter SF01 01319004 (SF01_01319004_Typ2) 433,92 MHz # MU;P0=706;P1=-160;P2=140;P3=-335;P4=-664;P5=385;P6=-15226;P7=248;D=01210103045303045453030304545453030454530653030453030454530303045454530304747306530304530304545303030454545303045453065303045303045453030304545453030454530653030453030454530303045454530304545306530304530304545303030454545303045453065303045303045453030304;CP=5;O; # MU;P0=-15222;P1=379;P2=-329;P3=712;P6=-661;D=30123236123236161232323616161232361232301232361232361612323236161612323612323012323612323616123232361616123236123230123236123236161232323616161232361232301232361232361612323236161612323612323012323612323616123232361616123236123230123236123236161232323616;CP=1;O; # MU;P0=705;P1=-140;P2=-336;P3=-667;P4=377;P5=-15230;P6=248;D=01020342020343420202034343420202020345420203420203434202020343434202020203654202034202034342020203434342020202034542020342020343420202034343420202020345420203420203434202020343434202020203454202034202034342020203434342020202034542020342020343420202034343;CP=4;O; # MU;P0=704;P1=-338;P2=-670;P3=378;P4=-15227;P5=244;D=01023231010102323231010102310431010231010232310101023232310101025104310102310102323101010232323101010231043101023101023231010102323231010102310431010231010232310101023232310101023104310102310102323101010232323101010231043101023101023231010102323231010102;CP=3;O; # MU;P0=-334;P1=709;P2=-152;P3=-663;P4=379;P5=-15226;P6=250;D=01210134010134340101013434340101340134540101340101343401010134343401013601365401013401013434010101343434010134013454010134010134340101013434340101340134540101340101343401010134343401013401345401013401013434010101343434010134013454010134010134340101013434;CP=4;O; { name => 'BOSCH | CAME | Novy | Neff', comment => 'remote control CAME TOP 432EV, Novy 840029, BOSCH or Neff SF01 01319004', id => '86', knownFreqs => '', one => [-2,1], zero => [-1,2], start => [-44,1], clockabs => 350, format => 'twostate', preamble => 'P86#', # prepend to converted message clientmodule => 'SD_UT', #modulematch => '^P86#.*', length_min => '12', length_max => '18', }, "87" => ## JAROLIFT Funkwandsender TDRC 16W / TDRCT 04W # https://github.com/RFD-FHEM/RFFHEM/issues/380 # MS;P1=1524;P2=-413;P3=388;P4=-3970;P5=-815;P6=778;P7=-16024;D=34353535623562626262626235626262353562623535623562626235356235626262623562626262626262626262626262623535626235623535353535626262356262626262626267123232323232323232323232;CP=3;SP=4;R=226;O;m2; # MS;P0=-15967;P1=1530;P2=-450;P3=368;P4=-3977;P5=-835;P6=754;D=34353562623535623562623562356262626235353562623562623562626235353562623562626262626262626262626262623535626235623535353535626262356262626262626260123232323232323232323232;CP=3;SP=4;R=229;O; { name => 'JAROLIFT', comment => 'remote control JAROLIFT TDRC_16W / TDRCT_04W', id => '87', knownFreqs => '433.92', one => [1,-2], zero => [2,-1], preSync => [3.8,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1], sync => [1,-10], # this is a end marker, but we use this as a start marker pause => [-40], clockabs => 400, # ca 400us developId => 'y', format => 'twostate', preamble => 'u87#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '72', # 72 length_max => '85', # 85 }, "88" => ## Roto Dachfensterrolladen | Aurel Fernbedienung "TX-nM-HCS" (HCS301 Chip) | three buttons -> up, Stop, down # https://forum.fhem.de/index.php/topic,91244.0.html # MS;P1=361;P2=-435;P4=-4018;P5=-829;P6=759;P7=-16210;D=141562156215156262626215151562626215626215621562151515621562151515156262156262626215151562156215621515151515151562151515156262156215171212121212121212121212;CP=1;SP=4;R=66;O;m0; # MS;P0=-16052;P1=363;P2=-437;P3=-4001;P4=-829;P5=755;D=131452521452145252521452145252521414141452521452145214141414525252145252145252525214141452145214521414141414141452141414145252145252101212121212121212121212;CP=1;SP=3;R=51;O;m1; { name => 'Roto shutter', comment => 'remote control Aurel TX-nM-HCS', id => '88', knownFreqs => '', one => [1,-2], zero => [2,-1], sync => [1,-10], # this is a end marker, but we use this as a start marker clockabs => 400, # ca 400us developId => 'y', format => 'twostate', preamble => 'u88#', # prepend to converted message #clientmodule => '', #modulematch => '', length_min => '65', length_max => '78', }, "89" => ## Funk Wetterstation TFA 35.1140.01 mit Temperatur-/Feuchtesensor TFA 30.3221.02 12/2018@Iron-R # https://github.com/RFD-FHEM/RFFHEM/issues/266 # MU;P0=-900;P1=390;P2=-499;P3=-288;P4=193;P7=772;D=1213424213131342134242424213134242137070707013424213134242131342134242421342424213421342131342421313134213424242421313424213707070701342421313424213134213424242134242421342134213134242131313421342424242131342421;CP=4;R=43; # MU;P0=-491;P1=382;P2=-270;P3=179;P4=112;P5=778;P6=-878;D=01212304012123012303030123030301230123012303030121212301230301230121212121256565656123030121230301212301230303012303030123012301230303012121230123030123012121212125656565612303012123030121230123030301230303012301230123030301212123012303012301212121212565;CP=3;R=43;O; # MU;P0=-299;P1=384;P2=169;P3=-513;P5=761;P6=-915;D=01023232310101010101023565656561023231010232310102310232323102323231023231010232323101010102323231010101010102356565656102323101023231010231023232310232323102323101023232310101010232323101010101010235656565610232310102323101023102323231023232310232310102;CP=2;R=43;O; # MU;P0=-32001;P1=412;P2=-289;P3=173;P4=-529;P5=777;P6=-899;D=01234345656541212341234123434121212121234123412343412343456565656121212123434343434343412343412343434121234123412343412121212123412341234341234345656565612121212343434343434341234341234343412123412341234341212121212341234123434123434565656561212121234343;CP=3;R=22;O; # MU;P0=22960;P1=-893;P2=775;P3=409;P4=-296;P5=182;P6=-513;D=01212121343434345656565656565634565634565656343456563434565634343434345656565656565656342121212134343434565656565656563456563456565634345656343456563434343434565656565656565634212121213434343456565656565656345656345656563434565634345656343434343456565656;CP=5;R=22;O; # MU;P0=172;P1=-533;P2=401;P3=-296;P5=773;P6=-895;D=01230101230101012323010101230123010101010101230101230101012323010101230123010301230101010101012301012301010123230101012301230101010123010101010101012301565656562323232301010101010101230101230101012323010101230123010101012301010101010101230156565656232323;CP=0;R=23;O; { name => 'TFA 30.3221.02', comment => 'temperature / humidity sensor for weatherstation TFA 35.1140.01', id => '89', knownFreqs => '433.92', one => [2,-1], zero => [1,-2], start => [3,-3,3,-3,3,-3], clockabs => 250, format => 'twostate', preamble => 'W89#', postamble => '', clientmodule => 'SD_WS', length_min => '40', length_max => '40', }, "90" => ## mumbi m-FS300 / manax MX-RCS250 (CP 258-298) # https://forum.fhem.de/index.php/topic,94327.15.html # MS;P0=-9964;P1=273;P4=-866;P5=792;P6=-343;D=10145614141414565656561414561456561414141456565656561456141414145614;CP=1;SP=0;R=35;O;m2; //A AN # MS;P0=300;P1=-330;P2=-10160;P3=804;P7=-840;D=02073107070707313131310707310731310707070731313107310731070707070707;CP=0;SP=2;R=23;O;m1; //A AUS # MS;P1=260;P2=-873;P3=788;P4=-351;P6=-10157;D=16123412121212343434341212341234341212121234341234341234121212341212;CP=1;SP=6;R=21;O;m2; //B AN # MS;P1=268;P3=793;P4=-337;P6=-871;P7=-10159;D=17163416161616343434341616341634341616161634341616341634161616343416;CP=1;SP=7;R=24;O;m2; //B AUS { name => 'mumbi | MANAX', comment => 'remote control mumbi FS300, MANAX MX-RCS250 (only receive)', id => '90', knownFreqs => '433.92', one => [3,-1], zero => [1,-3], sync => [1,-36], clockabs => 280, # -1=auto format => 'twostate', preamble => 'P90#', length_min => '33', length_max => '36', clientmodule => 'SD_UT', modulematch => '^P90#.*', }, "91" => ## Atlantic Security / Focus Security China Devices # https://forum.fhem.de/index.php/topic,58397.msg876862.html#msg876862 # MU;P0=800;P1=-813;P2=394;P3=-410;P4=-3992;D=0123030303030303012121230301212304230301212301230301212123012301212303012301230303030303030121212303012123042303012123012303012121230123012123030123012303030303030301212123030121230;CP=2;R=46; # MU;P0=406;P1=-402;P2=802;P3=-805;P4=-3994;D=012123012301212121212121230303012123030124012123030123012123030301230123030121230123012121212121212303030121230301240121230301230121230303012301230301212301230121212121212123030301212303012;CP=0;R=52; # MU;P0=14292;P1=-10684;P2=398;P3=-803;P4=-406;P5=806;P6=-4001;D=01232324532453232454532453245454532324545323232453245324562454532324532454532323245324532324545324532454545323245453232324532453245624545323245324545323232453245323245453245324545453232454532323245324532456245453232453245453232324532453232454532453245454;CP=2;R=50;O; { name => 'Atlantic security', comment => 'example sensor MD-210R | MD-2018R | MD-2003R (MU decode)', id => '91', knownFreqs => '433.92 | 868.35', one => [-2,1], zero => [-1,2], start => [-10,1], clockabs => 400, format => 'twostate', # preamble => 'P91#', # prepend to converted message length_min => '36', length_max => '36', clientmodule => 'SD_UT', #modulematch => '^P91#.*', developID => 'y', }, "91.1" => ## Atlantic Security / Focus Security China Devices # https://forum.fhem.de/index.php/topic,58397.msg878008.html#msg878008 # MS;P0=-399;P1=407;P2=820;P3=-816;P4=-4017;D=14131020231020202313131023131313131023102023131313131310202313131020202313;CP=1;SP=4;O;m0; # MS;P1=392;P2=-824;P3=-416;P4=804;P5=-4034;D=15121343421343434212121342121212121342134342121212121213434212121343434212;CP=1;SP=5;e;m2; { name => 'Atlantic security', comment => 'example sensor MD-210R | MD-2018R | MD-2003R (MS decode)', id => '91.1', knownFreqs => '433.92 | 868.35', one => [-2,1], zero => [-1,2], sync => [-10,1], clockabs => 400, format => 'twostate', # preamble => 'P91.1#', # prepend to converted message length_min => '32', length_max => '36', clientmodule => 'SD_UT', #modulematch => '^P91.1#.*', developID => 'y', }, "92" => ## KRINNER Lumix - LED X-MAS # https://github.com/RFD-FHEM/RFFHEM/issues/452 | https://forum.fhem.de/index.php/topic,94873.msg876477.html?PHPSESSID=khp4ja64pcqa5gsf6gb63l1es5#msg876477 # MU;P0=24188;P1=-16308;P2=993;P3=-402;P4=416;P5=-967;P6=-10162;D=0123234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232;CP=4;R=25; # MU;P0=11076;P1=-20524;P2=281;P3=-980;P4=982;P5=-411;P6=408;P7=-10156;D=0123232345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634;CP=6;R=38; { name => 'KRINNER Lumix', comment => 'remote control LED X-MAS', id => '92', knownFreqs => '433.92', zero => [1,-2], one => [2,-1], start => [2,-24], clockabs => 420, format => 'twostate', # preamble => 'P92#', # prepend to converted message length_min => '32', length_max => '32', clientmodule => 'SD_UT', #modulematch => '^P92#.*', }, "93" => ## ESTO Lighting GmbH | remote control KL-RF01 with 9 buttons (CP 375-395) # https://github.com/RFD-FHEM/RFFHEM/issues/449 # MS;P1=376;P4=-1200;P5=1170;P6=-409;P7=-12224;D=17141414561456561456565656145656141414145614141414565656145656565614;CP=1;SP=7;R=231;e;m0; # MS;P1=393;P2=-1174;P4=1180;P5=-401;P6=-12222;D=16121212451245451245454545124545124545451212121212121212454545454512;CP=1;SP=6;R=243;e;m0; # MS;P0=397;P1=-385;P2=-1178;P3=1191;P4=-12230;D=04020202310231310231313131023131023131020202020202020231313131313102;CP=0;SP=4;R=250;e;m0; { name => 'ESTO Lighting GmbH', comment => 'remote control KL-RF01', id => '93', knownFreqs => '433.92', one => [3,-1], zero => [1,-3], sync => [1,-32], clockabs => 385, # -1=auto format => 'twostate', preamble => 'u93#', length_min => '32', # 2. MSG: 32 Bit, bleibt so length_max => '36', # 1. MSG: 33 Bit, wird verlängert auf 36 Bit #clientmodule => 'SD_UT', #modulematch => '^P93#.*', developId => 'y', }, );